Panasonic Hc V210 Owners Manual

							- 31 -
1Press the MENU button.
2Press 3/4/2/1 to select the top 
menu A, then press the ENTER 
button.
3Select the submenu  B using  3/4 
and press  1 or press the ENTER 
button.
4Select the desired item 
using 3/ 4/2/1 , and 
press the ENTER 
button to set. To get back to the previous screen
Press 
2 of the cursor button.
To exit the menu screenPress the MENU button.
∫ About the information display
Descriptions of the selected submenus and 
items displayed in St eps 3 and 4 are displayed.
∫About the operation icons
/:
Select and press the ENTER button to 
switch page. :
Select and press the 
ENTER button to 
return to previous screen.
Basic
Using the menu screen
0æ0ï0õ0æ0ó
0î0æ0ï0ö 
						

							- 32 -
Set the display method for the screen information display.
Please refer to page 72.
Please refer to page 20 .
It is possible to display and record the time at the travel destination by selecting your home region 
and the travel destination.
≥ Change the mode to  .
1 Select the menu.
≥If the clock is not set, adjust the clock to the current time. ( l20)
≥ When the [HOME] (your home region) is not set, the message appears. Press the ENTER button 
and proceed to 
St e p 3.2 (Only when setting your home region)
Select [HOME] using 2/1 and press the ENTER button.
3 (Only when setting your home 
region)
Select your home region using 
2/1 and press the ENTER 
button.
≥ Press  3 to set daylight saving time. 
 appears and the summer time 
setting is turned on; the time difference 
from GMT is set forward by one hour. 
Press  3 again to return to the normal 
time setting.
Basic
Using the Setup Menu
[DISPLAY]
: [SETUP]  # [DISPLAY] #  desired setting
[ON] (Display all information)/[OFF] (Display part of information)
[EXT. DISPLAY]
[CLOCK SET]
[SET WORLD TIME]
: [SETUP] # [SET WORLD TIME]


A The current time
B The time difference from GMT 
(Greenwich Mean Time) 
						

							- 33 -
4(Only when setting the region of your travel destination)
Select [DESTINATION] using 
2/1 and press the ENTER button.≥When the home region is set for the first time, the screen for selecting home/travel destination 
appears after setting the home region successively. If the home region has already been set 
once, execute the menu operation for Step 1.
5 (Only when setting the region of 
your travel destination)
Select your travel destination 
using 
2/1 and press the 
ENTER button.
≥ Press  3 to set daylight saving time. 
 appears and the summer time 
setting is turned on. The travel 
destination time and time difference 
from the home region time are set 
forward by one hour. Press  3 again to 
return to the normal time setting.
≥ Close the setting by pressing the MENU button.   appears and the time of the travel 
destination is indicated.
To return the display to the home settingSet the home region using St ep 1 to 3, and close the setting by pressing the MENU button.
≥If you cannot find your travel destination in the area shown on the screen, set it by using the time 
difference from your home region.
It is possible to change the date and time display mode.
It is possible to change the date format.
[DATE/TIME]
: [SETUP]  # [DATE/TIME]  # desired setting
[DATE]/[D/T]/[OFF]
[DATE FORMAT]
: [SETUP]  # [DATE FORMAT]  # desired setting
 [Y/M/D]/[M/D/Y]/[D/M/Y]


CThe local time at the selected travel 
destination
D The time difference between the travel 
destination and the home region 
						

							- 34 -
When about 5 minutes have passed without any operation, this unit automatically turns off to save 
battery life.
≥This unit will not automatically turn off even if [ECONOMY (BATT)] is set to [ON] in following 
cases:
jUsing the AC adaptor
*
jUsing the USB cable for PC etc.
j PRE-REC is used
j During playback of the slide show
* When [ECONOMY (AC)] is activated, this unit automatically turns off.
When about 30 minutes have passed without any operation while connecting the AC adaptor with 
this unit, the unit automatically turns off.
≥ This unit will not automatically turn off even if the [ECONOMY (AC)] is set to [ON] in following 
cases:
j //
Using the USB cable for PC etc.
j PRE-REC is used
j During playback of the slide show
[ECONOMY (BATT)]
: [SETUP]  # [ECONOMY (BATT)] #   [ON]
[ECONOMY (AC)]
: [SETUP] # [ECONOMY (AC)] #  [ON] 
						

							- 35 -
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥When in Quick Start Standby Mode about 60% of the power used in recording pause mode 
is being consumed, so the recording time will be reduced.
≥ //
Quick Start will not work if there is no SD card inserted.
≥ Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no 
SD card inserted.
≥ Change the mode to  .
1 Select the menu.
2 Close the LCD monitor.
The status indicator  A flashes green and the unit goes into 
Quick Start Standby Mode.
3 Open the LCD monitor.The status indicator  A lights red and the unit is put into 
recording pause.
≥ Quick Start Standby Mode is canceled if
jabout 5 minutes have elapsed
j mode is set to 
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1 k.
≥ When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] 
(l 34)/[ECONOMY (AC)] ( l34), close the LCD monitor once and open it again.
≥ Turn the unit off using the power button.
[QUICK START]
: [SETUP]  # [QUICK START] # [ON]

 
						

							- 36 -
Starting and stopping of recording and unit on/off can be confirmed with this sound.
When [OFF] is selected, the sound is not output at the start/end of recording, etc.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l105)
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
≥When the AC adaptor is in use, the LCD monitor is set to   automatically.
≥ When the LCD monitor is bright, the recordable time with the battery will be shorter.
It adjusts brightness and color density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1 Select the menu.
2 Press  2/1 to adjust, and press the ENTER button.
≥Press the MENU button to exit the menu screen.
[ALERT SOUND]
: [SETUP]  # [ALERT SOUND]  # desired setting
(Volume low)/ (Volume high)/[OFF]
[POWER LCD]
: [SETUP]  # [POWER LCD]  # desired setting
(Makes even brighter)/ (Makes brighter)/ (Normal)/ (Makes less bright)
[LCD SET]
: [SETUP]  # [LCD SET]  # desired setting
[BRIGHTNESS]:Brightness of the LCD monitor
[COLOR]:Color level of the LCD monitor
+2+10-1
+1 
						

							- 37 -
Please refer to page 73.
Please refer to page 74 .
Please refer to page 72 .
Set to [YES] for changing the menu settings back to the default condition.
(Only when the mode is at the   position)
≥ Settings for [MEDIA SELECT]
*, [CLOCK SET] and [LANGUAGE] will not change.
* For users who have  //, this menu is not displayed.
Set the file number of the iFrame/MP4 and still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001. ( l100 )
≥ To reset the folder number, format the SD card and built-in memory, and then perform [NUMBER 
RESET].
[HDMI RESOLUTION]
[VIERA Link]
[TV ASPECT]
[INITIAL SET]
: [SETUP]  # [INITIAL SET]
[NUMBER RESET]
: [SETUP] # [NUMBER RESET] 
						

							- 38 -
Please be aware that if a medium is formatted, then all the data recorded on the medium will erase 
and cannot be restored. Back up important data on a PC, disc, etc. (l90)
*1  only
*2 / / Displayed when connecting a USB HDD. ( l78)
≥ /
Media selection screen is not displayed when the USB HDD is not connected. Select [YES] and 
press the ENTER button.
≥ Media selection screen is not displayed. Select [YES] and press the ENTER button.
≥ When formatting is complete, press MENU button to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred. 
(l 11 5 )
≥ Perform a physical formatting of the built-in memory when this unit is to be disposed/ transferred. 
(l 11 3 )
≥Do not turn this unit off or remove the SD card while formatting. Do not expose the unit to 
vibrations or shock.
[FORMAT MEDIA]
: [SETUP]  # [FORMAT MEDIA] # desired setting
[Built-inMemory]*1/[SD CARD]/[HDD]*2
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may not be 
used on this unit 
						

							- 39 -
The used space and remaining recordable time of the SD card and built-in memory can be checked.
≥Pressing the ENTER button switches between SD card and built-in memory display.
≥ When the mode switch is set to  , remaining recordable time for the selected recording format 
or recording mode is displayed.
≥ Press the MENU button to close the indication.
≥The SD card or built-in memory requires some space to store information and manage system 
files, so the actual usable space is slightly less than the indicated value. The usable SD card/built-
in memory space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this 
unit, PCs and software are expressed as 1 GB=1,024 k1,024 k1,024=1,073,741,824 bytes. 
Therefore, the indicated value of the capacity appears to be smaller.
The firmware version of this unit is displayed.
(Only when the mode is at the   position)
You can update the firmware version of this unit.
(Only when the mode is at the   position)
[MEDIA STATUS]
: [SETUP]  # [MEDIA STATUS]
[Firmware Version Info]
: [SETUP] # [Firmware Version Info]
[Firmware Upgrade]
: [SETUP] # [Firmware Upgrade]
For the latest update information, check the support website below. (As of December 2012)
http://panasonic.jp/support/global/cs/e_cam (This Site is English only) 
						

							- 40 -
This item is used to start the unit demonstration.
(Only when the mode is at the   position)
≥If [DEMO MODE] is switched to [ON] and you press the MENU button when there is no SD card 
inserted and while this unit is connected to the AC adaptor, the demonstration automatically 
starts.
If any operation takes place, the demonstration is canceled. However if no operations take place 
for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration, 
set [DEMO MODE] to [OFF] or insert an SD card.
This item is used to start the Optical Image Stabilizer demo.
(Only when the mode is at the   position)
≥ Select [O.I.S. DEMO] and press the ENTER button, the demonstration automatically starts.
When you press MENU button, the demonstration will be canceled.
You can select the language on the screen display and the menu screen.
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 87 .
This item is displayed only when an Eye-Fi card is inserted.
Please refer to page 88 .
[DEMO MODE]
: [SETUP] # [DEMO MODE] # [ON]
//
[O.I.S. DEMO]
: [SETUP] # [O.I.S. DEMO]
[LANGUAGE]
: [SETUP] # [LANGUAGE]  # desired setting
[Eye-Fi TRANSFER]
[Eye-Fi DIRECT]