Panasonic Hc V210 Owners Manual

							- 81 -
Copy selected files
1Connect this unit to the USB HDD to prepare for copying. (l78)≥You cannot supply power to the USB HDD from this unit.
2Select [Copy selected files] using the cursor button, then press the ENTER 
button.
≥It can also be set by selecting [COPY] from the menu.
3/
Select [YES] and press the ENTER button.
Select the media you wish to copy and press the ENTER button.
≥Please refer to page 76  for information on copying files between the SD card/built-in memory.
4Following the screen display, select the desired item using the cursor button, 
and press the ENTER button.
≥Select   and press the ENTER button to return to the previous screen.
≥ (When [SELECT SCENES] is selected)
When you press the ENTER button, the scene/still picture is selected and  indication appears 
on the thumbnail. Press the ENTER button again to cancel the operation.
≥ (When [SELECT DATE] is selected)
When you press the ENTER button, a date is selected and surrounded by red. Press the ENTER 
button again to cancel the operation.
≥ Up to 99 scenes/still pictures or 99 dates can be set in succession.
5Press the MENU button when the copy complete message is displayed.≥ The thumbnail view of the copy destination is indicated.
When you stop copying halfway:Press the MENU button while copying.
[]:When copying from the SD card to the USB HDD.
[]:When copying from the built-in memory to the USB HDD. 
						

							- 82 -
Playing back the USB HDD
≥Only mortion picture/still picture that have been copied by connecting this unit to the 
USB HDD or created with HD Writer LE 2.0 can be played back.
A USB Connection Cable (supplied with recommended USB HDD)
B recommended USB HDD (commercially-available)
≥ Insert the plugs as far as they will go.
1Connect this unit to the USB HDD to prepare for playback. ( l78)≥When playing back on a TV, connect this unit to the TV. (l 71)
2Select [Playback HDD] using the cursor button on the unit and press the 
ENTER button.
3Select the scene or still picture and press the ENTER button to playback.≥The playback operation is performed the same as when playing back motion pictures or still 
pictures. ( l28, 57 )
To terminate the connection between this unit and the USB HDDSelect   in the thumbnail screen and press the ENTER button.
≥Disconnect the USB Connection Cable from this unit.
≥It is also possible to switch the media to playback by selecting the play mode selection icon and 
pressing the ENTER button.   (USB HDD) in the media can be selected when USB HDD is 
connected. ( l28)
≥ Deleting scenes and still pictures on the USB HDD may take time.
≥ You cannot set the following items during playback of   (USB HDD).
j[SCENE PROTECT]
j [DIVIDE]
j [SPLIT&DELETE]
j [RELAY SCENE COMBINE]
[RELAY INFO CANCEL]

 
						

							- 83 -
∫
Check before dubbing
Check the equipment used for dubbing.
* Some equipment may not be compatible with high-definition (AVCHD) picture quality. In such a 
case, connect with the AV cable and dub with standard picture quality. ( l86)
≥ For the positions of the SD card slot, USB terminal, or terminal for connecting the AV cable, refer 
to the operating instructions of the equipment used.
≥ The iFrame scenes cannot be dubbed by inserting the SD cards or by connecting with the USB 
cable. To dub iFrame scenes, refer to page  86.
Copy/Dubbing
Dubbing with a Blu-ray disc recorder, 
video devices, etc.
Equipment used for 
dubbingDubbing picture qualityTo  d u b
Equipment with SD card slot High-definition picture quality*Insert the SD card 
directly (
l84)
Equipment with USB 
terminal High-definition picture quality*Connect with 
supplied USB 
cable (
l84)
Equipment without 
SD card slot or USB  terminal Standard picture quality
This can be played back on equipment 
incompatible with high-definition 
(AVCHD), so it is convenient if you are 
dubbing for distribution.
Connect with AV 
cable (
l86)
You can dub using a Panasonic Blu-ray disc recorder or high-definition (AVCHD) 
compatible DVD recorder.
≥ Depending on the recorders or the media to be copied to, you may not be able to copy 
in high-definition (AVCHD) picture quality. For further details, see the operating 
instructions of your recorder.
≥ Note that the equipment described may not be available in certain countries and 
regions.
//
≥ The scenes recorded in 1080/60p recording mode can only be dubbed to a Blu-ray disc 
using the AVCHD Progressive compatible devices. The scenes recorded in 1080/60p 
recording mode are not displayed when connected to the product that is not 
compatible with AVCHD Progressive.
≥ In order to dub a scene recorded at 1080/60p using an AVCHD-compatible device, 
convert to 1080/60i using HD Writer LE 2.0 or connect with an AV cable and dub at 
standard image quality. ( l86) See the software instruction manual for details on 
HD Writer LE 2.0. ( l101) 
						

							- 84 -
∫
To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥
To copy scenes or still pictures from the built-in 
memory to an SD card, see page  76.
∫ To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
≥ //
Use the AC adaptor to free you from worrying about the battery running down.
When the USB cable is connected to other equipment, the AC adaptor cannot be used. Please 
ensure that the battery is sufficiently charged.
≥ Turn on the unit.
//
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1Connect the unit to the Blu-ray disc recorder or high-definition (AVCHD) 
compatible DVD recorder.
≥The USB function selection screen will appear on the screen of the unit.
Dubbing in high-definition picture quality 
						

							- 85 -
2Select [RECORDER] using the cursor button on the unit and press the 
ENTER button.
≥When you select an option other than [RECORDER], reconnect the USB cable.
≥//When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button 
to turn the LCD monitor on.
3Select the media you wish to dub, then press the ENTER button.≥ When using the battery, the LCD monitor turns off after about 5 seconds. Press the cursor button 
to turn the LCD monitor on.
4Dub through operations on the Blu-ray disc recorder or high-definition 
(AVCHD) compatible DVD recorder.
≥
Do not press the ENTER button of the unit during dubbing.
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any 
other USB cables.)
≥ When this unit is connected to a Panasonic Blu-ray disc recorder or a DVD recorder using a USB 
cable while the unit is turned on, power is also supplied from the connected equipment to this 
unit.
≥ For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc 
recorder or DVD recorder.
≥ When you connect the unit to a Blu-ray disc recorder, a dubbing operations screen may appear 
on the television connected to the Blu-ray disc recorder. In this case as well, perform the 
operations of 
St eps 1 to 4.
≥ You cannot change the mode of the unit or turn off the unit while it is connected to a Blu-ray disc 
recorder or DVD recorder. Disconnect the USB cable before performing either of these 
operations.
≥ If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder 
to cancel the dubbing.
About the screen indication of the unit
≥When the unit is accessing the SD card, card access icon ( ) appears on the unit screen 
or the access lamp is on.
≥  When the unit is accessing the built-in memory, built-in memory access icon ( ) appears 
on the unit screen or the access lamp is on.
≥ Be careful not to disconnect the USB cable, AC adaptor or battery while the unit is accessing 
media, as this may result in the loss of recorded content. 
						

							- 86 -
∫Dubbing using equipment without an SD card slot or a USB terminal, 
or using a video device
You can dub by connecting an AV cable.≥Images are dubbed in standard quality.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Change the mode to  .
1Connect this unit to a video device and start playback on this unit.
2Start recording on the connected device.≥To stop recording (dubbing), stop playback on this unit after stopping recording on the recorder.
≥If the date and time display and function indication are not wanted, cancel them before dubbing. 
(l 32, 72 )
≥ Turn off the operation icon by pressing the ENTER button when dubbing ( l29).
Dubbing in standard picture quality
Change the video input on the video 
device and TV that this unit is 
connected to.
≥The channel set will differ depending on the 
terminal to which the unit is connected.
≥ See the operating instructions of the video device 
for details.
≥ Insert the plugs as far as they will go.
A AV cable (supplied) or Composite video cable 
(commercially-available)
*
* Use the AV cable that comes with this unit if 
supplied. Check the accessories in the basic 
owner’s manual.
If the dubbed images are played back on a wide-screen TV, the images may be stretched 
vertically.
In this case, refer to the operating instruction of the device you are connecting to or read the 
operating instructions of the wide-screen TV and set the aspect ratio to 16:9.

A/V 
						

							- 87 -
Using an Eye-Fi card (commercially-available), you can record motion pictures and still pictures on 
the card, and save them on a PC or upload them on a file-sharing website via a wireless network.
≥Inserting an Eye-Fi card (commercially available) to the unit.
≥
(When using in the Recording Mode)Set the card to be used as the recording media(When using in the Playback Mode)Select the Playback Mode icon from the thumbnail screen, and set the media to   (card) 
( l 28)
Select the menu.
≥When [Eye-Fi TRANSFER] is set to [ON], the transferrable files will be transferred automatically.
≥ To cancel the transferring of a file, turn off the unit or set [Eye-Fi TRANSFER] to [OFF].
≥ The setting at the time of purchase is [OFF]. Every time the Eye-Fi card is removed from the unit, 
this setting is set to [OFF].
≥ Eye-Fi transfers are not available during motion picture recording.
≥ You can check the file transfer status on the thumbnail screen.
Copy/Dubbing
Using the Eye-Fi™ card
≥The functions of the Eye-Fi card (including wireless transmission) are not guaranteed to work 
on this product. In the case of a malfunction of the card, please contact the card manufacturer.
≥ To use the Eye-Fi transfer feature, a broadband wireless LAN environment is required.
≥ To use the Eye-Fi card, permission from the national or regional government is required. Do 
not use if you have not obtained permission. If you are unsure as to whether use is permitted, 
please check with the card manufacturer.
≥ To prevent the interception of communications, misuses, identity thefts, etc., we strongly 
recommend you configure the appropriate security settings (encryption settings). For details, 
refer to the manuals of your Eye-Fi card and access point.
≥ Install the software supplied with the Eye-Fi card in advance on your PC, and configure 
the Eye-Fi settings. (For settings methods etc., please read the card operating 
instructions or consult the card manufacturer)
: [SETUP]  # [Eye-Fi TRANSFER]  # [ON]
File has been transferred
File waiting for transfer
File cannot be transferred 
						

							- 88 -
∫
Using Eye-Fi direct mode
The files can be transferred directly from the Eye-Fi card to a smartphone or tablet without going 
through the access point when necessary setting is performed in a PC in advance.
≥Install the software supplied with the Eye-Fi card on your PC, and configure the Eye-Fi 
direct mode settings.
≥ Inserting an Eye-Fi card (commercially available) to the unit
Select the menu.
≥This mode is displayed only when [Eye-Fi TRANSFER] is set to [ON].
≥ The mode will be canceled using the following steps.
jWhen the unit is turned off
j If you start recording motion picture
In addition to the steps above, the mode may also be canceled by the Eye-Fi card.
≥ When connected via Eye-Fi direct mode, [ECONOMY (BATT)]/[ECONOMY (AC)] are disabled.
∫ Selecting files to transfer
If you perform the required settings in advance on your PC, you can transfer selected files alone. 
For settings methods etc., please read the card operating instructions or consult the card 
manufacturer.
≥Install the software supplied with the Eye-Fi card on your PC, and configure the selection 
transfer settings.
≥ Inserting an Eye-Fi card (commercially available) to the unit
≥ //
Set the mode switch to  , select the playback mode selection icon, and set the video/
still picture to [iFrame], [MP4], or [PICTURE] ( l28)
Set the mode switch to  , select the playback mode selection icon, and set the media 
to   (card), and video/still picture to [iFrame], [MP4], or [PICTURE] ( l28)
Select the menu.
≥The settings method is the same as that for the [SCENE PROTECT] settings. ( l68)≥If the selected transfer setting is not configured on the computer, [SCENE PROTECT] is 
displayed and the selected transfer setting cannot be configured.
≥ When the write protect switch on the Eye-Fi card is on the LOCK side, [SCENE PROTECT] is 
displayed and selected transfer setting is disabled. Please unlock the write protect switch.
≥ The protect setting is also applied to the files for which [TRANSFER/PROTECT] is set. To delete 
or rotate a file, first cancel [TRANSFER/PROTECT] and then perform the operation.
≥ AVCHD scenes cannot be used as the selected transfer setting. : [SETUP] 
# [Eye-Fi DIRECT]
: [VIDEO SETUP] or [PICT. SETUP]  # [TRANSFER/PROTECT] 
						

							- 89 -
≥The Eye-Fi menu only appears when an Eye-Fi card is used.
≥ The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to 
changes to the card specification etc.
≥ Update the firmware of the Eye-Fi card to the latest one using the software supplied with the Eye-
Fi card before use.
≥ When the endless memory function of the Eye-Fi card is set to on, the files transferred from the 
card may be deleted automatically.
≥ The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of an 
Eye-Fi card accelerates the battery drain, so we recommend you use the card in Playback Mode.
≥ Setting of the Eye-Fi can be confirmed while pausing the recording.
≥ If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fi 
again from the menu.
≥ When using the Eye-Fi card, please be sure to unlock the write-protect switch. ( l16)
≥ Before deleting the files, please confirm they have been transferred to your PC and uploaded to 
the sharing site.
≥ Do not use the Eye-Fi card in locations where the use of wireless devices is forbidden, such as 
inside aircraft etc.
≥ Depending on network conditions, the transfer ma y take some time. Also, if network conditions 
deteriorate, the transfer may be suspended.
≥ Files over 2 GB in size cannot be transferred. Such files should first be split to reduce the file size. 
(l 66)
[Eye-Fi TRANSFER] is set to [ON]
(Transferring in Eye-Fi direct mode)
[Eye-Fi TRANSFER] is set to [ON]
[Eye-Fi TRANSFER] is set to [OFF] 
						

							- 90 -
HD Writer LE 2.0
You can copy the motion/still picture data to the HDD of PCs or write to media like Blu-ray discs, 
DVD discs or SD cards using HD Writer LE 2.0, the software installed in the supplied CD-ROM.
Refer to the operating instructions of HD Writer LE 2.0 (PDF file) for details on how to use it.
∫
Smart wizard
The Smart wizard screen is automatically displayed when you connect this unit to a PC with 
HD Writer LE 2.0 installed. ( l98)
Copy to PC:
You can copy motion/still picture data to the HDD of PCs.
Copy to disc:
You can copy to disc in high-definition picture quality or conventional standard picture quality 
(MPEG2 format).
≥ Select the function you wish to use and follow the on-screen instructions for easy copying.
With a PC
What you can do with a PC
What can be done with the HD Writer LE 2.0Data type
Copying data to a PC
Motion 
picture and  still picture
Copying in Blu-ray disc/AVCHD format:
≥
//
The scenes recorded in 1080/60p can be copied as 1080/60p. 
( l 91: Important Notice)
≥ The scenes in iFrame or MP4 cannot be copied to Blu-ray disc or in AVCHD 
format.
Copying in DVD-Video format:
≥ Converted to conventional standard quality (MPEG2 format).
Motion 
picture
Editing:
Editing motion picture data copied on an HDD of a PC
≥
Dividing, Trimming, Still picture, Title, Effect, Transition, BGM, Delete partially
≥ Converting the motion picture data to MPEG2
≥ Converting part of motion picture into still picture
Online sharing:
You can upload motion pictures on the Internet and share them with your family 
and friends.