Panasonic Hc V210 Owners Manual

- 61 -
Highlight Playback [HC-V210]/[HC-V201]/[HC-V210M]
Part that was recognized as clearly recorded is extracted from multiple scenes, and it can be played 
back in a short time with effects and music added.
≥Highlight Playback cannot be performed for scenes in iFrame or MP4.
1Select   using the cursor button, 
then press the ENTER button.
2(Only when you would like to change the 
settings)
Select the desired item and press the ENTER button.
3Select [START] and press the ENTER button.≥When the [SCENE...

- 62 -
3(When [SELECT DATE] is selected)
Select the date to be played back and press the ENTER button.
≥A maximum of 7 days can be selected.
≥ Selected date will be surrounded in red. Press the ENTER button again to cancel.
(When [SELECT SCENES] is selected)
Select the scenes to be played back and press the ENTER button.
≥Up to 99 scenes can be selected in succession.
≥  is displayed on the selected scene. Press the ENTER button again to cancel.
4Select [Enter] and press the ENTER button.
∫Priority...

- 63 -
Changing the playback settings and playing back the 
slide show
1Select   using the cursor button, 
then press the ENTER button.
2(Only when you would like to change the 
settings)
Select the item to change and press the ENTER button.
3(When [DATE SETUP] is selected)
Select the playback date, then press the ENTER button.
(When [SLIDE INTERVAL] is selected)
Select the interval of playback for the slide show and press the ENTER 
button.
(When [MUSIC SELECT] is selected)
Select the desired sound and...

- 64 -
¬Change the mode to  .
∫ To delete the scene or still picture being played back
Press the Optical image stabilizer/Delete button or Delete button while scenes or 
still pictures to be deleted are being played back.
∫To delete scenes or still pictures from the thumbnail display
≥Switch to the thumbnail display of the scenes or still pictures to delete. ( l28)
1Press the Optical image stabilizer/Delete button or Delete button while the 
thumbnail view screen is displayed.
≥When the thumbnail display...

- 65 -
3(When [MULTI] is selected in Step2)
Select the scene/still picture to be deleted, then press the ENTER button.
≥ The scene/still picture is selected and the  indication appears on the thumbnail. Press the 
ENTER button again to cancel the operation.
≥ Up to 99 scenes can be selected to be deleted.
(When [SINGLE] is selected in Step2)
Select the scene/still picture to be deleted, then press the ENTER button.
4(When [MULTI] is selected in Step2)
Select [Delete], and press the ENTER button, or the...

- 66 -
Dividing a scene (AVCHD)
It is possible to divide an AVCHD scene. Any unwanted parts in the scene can be deleted after 
dividing.
≥Set the mode switch to  , select the play mode selection icon, and select the AVCHD 
scene. ( l28)
1Select the menu.
2Select the scene you wish to divide using the cursor button and press the 
ENTER button.
3Select  to set the dividing point.≥It is convenient to use Slow-motion Playback and 
Frame-by-frame Playback. ( l57)
≥ Select [YES] to continue dividing the same...

- 67 -
Dividing a scene to partially delete (iFrame, MP4)
Divide the iFrame or MP4 scene, and delete unnecessary parts.
This divides the recorded scenes in two and deletes the front half or back half.
The scenes that were deleted after division cannot be recovered.
≥Set the mode switch to  , select the play mode selection icon, and set to [iFrame] or 
[MP4]. ( l28)
1Select the menu.
2Select the scene you wish to divide using the cursor button and press the 
ENTER button.
3Select  to set the dividing...

- 68 -
Protecting scenes/still pictures
Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures, formatting the media will delete them.)
≥Change the mode to  .
1Select the menu.
* [TRANSFER/PROTECT] is displayed when using the Eye-Fi card that is set as the selected 
transfer setting device in advance on the computer.
2Select the scene/still picture to be protected using the cursor button, then 
press the ENTER button.
≥The...

- 69 -
You can combine the relayed scene (l49) in the built-in memory and the continued scene in 
the SD card to be one into the SD card.
A Built-in memory
B SD card
C Range of Relay Recording
≥ Set the mode switch to  , select the play mode selection icon, and select the AVCHD 
scene. ( l28)
1Insert the SD card that was used for Relay Recording.
2Select the menu.
3When the confirmation message appears, select [YES] using the cursor 
button, then press the ENTER button.
≥Scene in the built-in memory will...

- 70 -
To cancel relay information
≥When the relay information is canceled, combining of the relayed scenes will not be possible 
anymore. : [EDIT SCENE] 
# [RELAY INFO CANCEL]
Combining of the relay scene cannot be performed if the available space on the SD card is less 
than the volume of the relayed scene in the built-in memory. It is recommended to combine the 
relay scene using the HD Writer LE 2.0.