Home > Panasonic > Automobile Electronics > Panasonic Hands Free Kit Cy Bt200u Operating Instructions

Panasonic Hands Free Kit Cy Bt200u Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Hands Free Kit Cy Bt200u Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							English
    31
    ProblemPossible causeaPossible solution
    The voice quality of
    hands-free is low
    (Distortion, noise etc.).
    There is another wireless device near the unit.
    ●Switch off the wireless device or keep it away from these Hands Free Kit with
    Audio Streaming featuring Bluetooth®technology.
    The distance between CY-BT200U (this unit) and the mobile phone is too long or too
    short.
    ●Keep a proper distance between CY-BT200U (this unit) and the mobile phone.
    The reception condition of the mobile phone is poor, or the line status is bad.
    ●Use the mobile phone in areas with good reception condition.
    Telephone
    conversation is
    suspended. Receiving condition of your mobile phone is bad.
    ●Drive your car to the place where receiving condition is good and park your car in
    a safe place with parking brake used, and then you make a call.
    The phone
    conversation is hard
    to hear.If you and the person on the other end of the line talk at the same time, you may have
    difficulty to hear his or her voice, and vise versa. (This is not machine failure.)
    ●The telephone conversation should be conducted alternately. 
    						
    							32
    Troubleshooting (continued)
    A call-back call
    cannot be made.
    Some mobile phones do not send Bluetooth data even if incoming calls are indicated on
    the screen of your mobile phone. 
    ●A call-back call cannot be made.
    The calling party activates the caller ID blocking function.
    ●A call-back call cannot be made.
    An international call was received.
    ●A call-back call may not be made internationally depending on a contract with the
    mobile phone company. Check the contract.
    ProblemPossible causeaPossible solution
    Talking volume is low
    or noisy.(claim from
    the person on the
    other end of the line)
    Distance between the microphone and the talker is too long or the connection of micro-
    phone is not proper.
    ●Make the microphone closer to the talker. Or connect the microphone’s connector
    properly.
    The window is open, or the air conditioner blows air to the microphone.
    ●Close the window, change the air direction from the air conditioner, or change the
    microphone position. 
    						
    							English
    33
    ProblemPossible causeaPossible solution
    The CY-BT200U (this
    unit) is inoperable.
    The Switch Unit is disconnected.
    ●Connect the Switch Unit securely and properly.
    The power of the Head unit is set to off.
    ●Turn on the power of the Head unit.
    For other than the above
    ●Turn on and off the power of the Head unit.
    ●Toggle the ignition switch between ACC ON and ACC OFF of the car, or turn on and
    off the mobile phone.
    Audio output comes
    out of the mobile
    phone after
    reconnection.For some mobile phone models, audio output does not switch to the hands-free kit
    automatically.
    ●Refer to the instruction manual for the mobile phone regarding audio switching. 
    						
    							34
    Specifications
    Power supply : DC 12 V (11 – 16 V), test voltage 14.4 V, negative ground 
    (Supplied from a head unit or a Expansion Module)
    Current consumption : Less than 1.0 A
    Communication Frequency : 2,402 MHz – 2,480 MHz
    Number of channels : 79 channels
    Channel width : 1.0 MHz
    Communication mode : Frequency hopped spread spectrum communication
    RF output : –1 dBm (0.8 mW)
    Service area : Within 10 m
    Applicable Bluetooth version : Ver. 1.2
    Supported profile : HFP (Hands-Free Profile), OPP (Object Push Profile), A2DP (Advanced Audio Distribution Profile),
    AVRCP (Audio/Video Remote Control Profile)
    Microphone impedance : 600 Ω
    Dimensions (W x H x D) : 72.8 x 102 x 24 mm {2 
    7/8 ”x 4”x 15/16”} (Excluding Switch Unit and Microphone)
    Weight : 0.5 k
    g {1 lb. 16 oz}(Excluding Switch Unit and Microphone) 
    						
    							English
    35
    FCC ID:ACJ932CY-BT100U
    Canada: License No
    IC: 216J-CYBT100U
    Note: 
    ¡Specifications and design are subject to modification without notice due to improvements.
    ¡Some figures and illustrations in this manual may be different from your product. 
    						
    							YFM264C099ZA            PTW1107-0138       Printed in Taiwan
    ©2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved
    Panasonic Consumer
    Electronics Company,
    Division of Panasonic
    Corporation of North America
    One Panasonic Way, Secaucus,
    New Jersey 07094
    http://www.panasonic.com
    Panasonic Sales Company,
    Division of Panasonic Puerto
    Rico, Inc. (“PSC”)
    Ave. 65 de Infantería, Km. 9.5
    San Gabriel Industrial Park,
    Carolina, Puerto Rico 00985
    http://www.panasonic.com
    Panasonic Canada Inc.
    5770 Ambler Drive,
    Mississauga, Ontario
    L4W 2T3
    http://www.panasonic.ca 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Hands Free Kit Cy Bt200u Operating Instructions