Panasonic Hands Free Kit Cy Bt200u Operating Instructions

							English
21
eMicrophone positioning
Position the microphone appropriately to catch sounds satisfac-
torily. 
The direction of the sun visor may change the volume.
rCommunication test on
paired mobile phone 
Check whether the paired mobile phone is available. (Call to the
paired mobile phone.)
tVolume adjustment
(head unit)
Note:The volume is adjustable only when receiving calls.
qAdjust the ring volume.
The ring tone may come from the mobile phone depending on
your head unit or mobile phone. Refer to the individual instruc-
tions for the head unit or mobile phone for details.
wAdjust the volume of telephone conversation. 
						

							22
Basic Operation (Hands-Free Kit)
This unit is designed only for receiving calls with taking
account of safety. No call can be made with this unit.
(But a
call-back call can be made.)
❑ Receiving a call
When a call comes in, the state indicator blinks rapidly.
1Press the[Hang-on]to receive a call.
2Adjust the volume if necessary. (\Operating
instructions of your head unit).
3Press the [Hang-up]to end a call.
Note:
¡Bluetooth connection will make the battery life of mobile
phone shorter.
¡Depending upon the mobile phone, the display backlight of a
mobile phone remains on when the ignition switch is in the
ACC ON position. In this case, you should turn off the backlight
with the mobile phone ( 
 Manual of your mobile phone).
¡Do not turn off the power of the Head unit during a phone
conversation. Otherwise, some mobile phones cut the conver-
sation.
¡In some cases such as the manner mode, the ring tone is dis-
abled while the ring tone is set to off.
❑ Automatic reconnection 
When you get out of the car, turning off the power of the Head unit allows auto-
matic disconnection of communication between this unit and the mobile phone.
After communication is disconnected, the mobile phone can be used as usual.
When you get in the car, turning on the power of the Head unit allows automat-
ic connection of communication between this unit and the mobile phone.
(Some mobile phone models require automatic connection setting. In some
cases, connection setting is required on the selection screen appearing on the
mobile phone while connection is established.) After communication is con-
nected, the hands-free function is available.
Caution
¡Telephone conversation during driving may result in conse-
quences adverse to safety. Follow your local laws and regu-
lations.
¡Appropriately adjust the volume of incoming calls in
advance ( 
 Operating instructions of your head unit). 
						

							English
23
Advanced Operation (Hands-Free Kit)
❑ Calling back
A callback call can be made.
However, the callback function is disabled after disconnecting
Bluetooth communication. (e.g. communication disconnection
between the Hands Free Kit with Audio Streaming featuring
Bluetooth
®technology and mobile phone, and communication
disconnection by turning off the power of the Head unit) 
Refer to the Operating Instructions of the head unit for further
information.
Note: Some mobile phones cannot display the telephone num-
ber of an incoming call or callback.
❑ Rejection of incoming calls
Press the [Hang-up]to reject an incoming call.
❑ Disconnection of Bluetooth
You can disconnect Bluetooth temporarily.
Disconnection
Refer to the Operating Instructions of the head unit for further
information.
Reconnection
Refer to the Operating Instructions of the head unit for further
information.
Note: You cannot disconnect Bluetooth in the talking state but
end a call. 
						

							24
Installation
Main Unit
Qty: 1
Switch Unit
(2 m)
Qty: 1
Microphone with Bracket
(5 m)
Qty: 1
System-up connecting cable
(3 m)
Qty: 1
Double-sided Tape(12 x 55 mm)Qty: 2
Double-sided Tape(15 x 30 mm)Qty: 1
Cable Clamp
Qty: 5
CY-BT200U CY-BT200Uq
w
e
r
t
y
u
Warning
¡This installation information is designed for professional
installers with knowledge of automobile electrical safety sys-
tems and is not intended for non-technical, do-it-yourself indi-
viduals. It does not contain instructions on the electrical installa-
tion and avoidance of potential harm to air bag, anti-theft and
ABS braking or other systems necessary to install this product.
Any attempt to install this product in a motor vehicle by anyone
other than a professional installer could cause damage to the
electrical safety systems and could result in serious personal
injury or death.
¡If your car is equipped with air bag and/or anti-theft systems,
specific procedures may be required for connection and discon-
nection of the battery to install this product. Before attempting
installation of this electronic component against the manufac-
turer’s recommendation, you must contact your car dealer or
manufacturer to determine the required procedure and strictly
follow their instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE
UNINTENDED DEPLOYMENT OF AIR BAGS OR ACTIVATION OF
THE ANTI-THEFT SYSTEM RESULTING IN DAMAGE TO THE VEHI-
CLE AND PERSONAL INJURY OR DEATH.
❑ Installation Hardware 
						

							English
25
1Remove the cable from the battery negative
terminal.
2Connect all the cables of CY-BT200U (this
unit).
3Secure the Main unit q, Switch Unit wand
Microphone with Bracket 
e.
qAttach the Main unit qand the Switch Unit  wwith the
double-sided tape 
t y.
wSecure the microphone with brackete.
eSecure all connection cables with Cable Clamp u.
4Reconnect the Battery Cable.
Main Unit q
Peel off the back papers
Fix the cable with the
Cable Clamp 
u.Sun visor Attach the Microphone with
Bracket 
eby clipping on the
sun visor etc.
Peel off the back papers
Switch Unit w
Caution
¡Make sure that wiring is completed before installation.
¡Do not install the product where it is exposed to strong
vibrations or is unstable. Avoid slanted or strongly curved
surfaces for installation. If the installation is not stable,
the unit may fall down while driving and this can lead to
an accident or injury. 
						

							26
Wiring
Connection between CY-BT200U (this unit) and the head unit
CY-BT200U CY-BT200U
Head unit (e.g. CQ-VX100U, Option) Microphone with Bracket
e
Switch Unit w
Main Unit q
System-up connecting
cable
r
■How to disconnect cord with lockDisconnect the cord while pressing the lock section in the arrow direction.
●Pulling the cord with excessive force may cause damage to the cord.●Be sure to unlock the connection portion when disconnecting the cord.
wSwitch UnitrSystem-up connecting
cable (main unit side)rSystem-up connecting
cable (connected
device side) 
						

							English
27
CY-BT200U CY-BT200U
Head unit/Expansion module
connection cable
(supplied with CY-EM100U)
Expansion Module
(CY-EM100U, Option) System-up connecting cable
r
Switch Unit w
Head unit
(e.g. CQ-VX100U, Option)
iPod
Direct Cable for iPod 
(CA-DC300U, Option)
Connection among CY-BT200U (this unit) and two or more devices
Microphone with Brackete
Main Unit q 
						

							28
Troubleshooting
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized
Panasonic Servicenter. The product should be serviced only
by qualified personnel. Please refer the checking and the
repair to professionals. Panasonic shall not be liable for any
accidents arising out of neglect of checking the unit or your
own repair after your checking.Warning
¡Do not use the unit in an irregular condition, for exam-
ple, without sound, or with smoke or a foul smell, which
can cause ignition or electric shock. In case that such
conditions occur, immediately stop using this unit and
consult your dealer.
¡Never try to repair the unit by yourself because it is dan-
gerous to do so.
ProblemPossible causeaPossible solution
Reconnection failed
With regard to some devices, reconnection cannot be automatically performed.●Turn off the power of the Bluetooth-ready device, and then turn on the power of the
device again.
The Link key of the Bluetooth-ready device is different from that of this unit.●Try to establish the pairing again. If the pairing was not successfully established,
delete “Panasonic BT200” from the pairing list of the Bluetooth-ready device.
■Common 
						

							English
29
ProblemPossible causeaPossible solution
Pairing failed
There is another wireless device near the unit.
●Switch off the wireless device or keep it away from these Hands Free Kit with
Audio Streaming featuring Bluetooth®technology.
The distance between this unit and the Bluetooth-ready device is too long, or the
Bluetooth-ready device is hidden behind a metallic object from this unit.
●Change the location of the Bluetooth-ready device.✽Consult your dealer to move the main unit.
The Bluetooth function of the Bluetooth-ready device is deactivated.●Refer to the Operating Instructions of the Bluetooth-ready device. (With regard to
some devices, the power saving mode is activated after a certain time.)
The automatic reconnection setting of the Bluetooth-ready device is deactivated.●Refer to the Operating Instructions of the Bluetooth-ready device.
The profile of the Bluetooth-ready device is not supported. ●Check the description of the supported profiles. ( \page 34) 
						

							30
The hands-free voices
accompany the echo
or howling.Distance between the microphone and the speaker is too short.
●Keep sufficient distance between the microphone and the speakers or decrease
the volume of voice (Refer to the manual of your Head unit.).
✽Echo may be produced depending on the line status or mobile phone to be used.
CY-BT200U (this unit)
cannot receive a call.
The head unit is set to OFF.●Turn on the power of the head unit.
CY-BT200U (this unit) is set to the disconnection mode.●Cancel the disconnection mode.
Your mobile phone is out of service area.●Drive your car to the service area of your mobile phone.
Bluetooth connection is disconnected. (The blue indicator does not light up.)●Establish Bluetooth connection again.
The mobile phone is selected to the setting so that the ring volume is zero such as the
manner mode.
●Refer to the operating instructions for the mobile phone and change the setting.
(The ringtone of some mobile phones does not come from the speakers mounted
in a car but only from the mobile phones.)
ProblemPossible causeaPossible solution
Troubleshooting (continued)
■Hands-Free Kit