Panasonic Ey7202 Operating Instructions Manual

Cordless Impact Driver
Perceuse à impact sans fil
Destornillador de impacto inalámbrico
Operating Instructions
Instructions d'utilisation
Manual de instrucciones
Model No : EY7202
IMPORTANTThis manual contains safety information. Read manual completely before first using this product and save this manual for future use.
IMPORTANTCe mode d’emploi contient des informations sur la sécurité. Lisez-le en entier avant d’utiliser le produit et conservez-le pour référence.
IMPORTANTEEste manual contiene...

- 2 - 
Index/Index/Indice
English: Page 3
Français: Page 15
Español: Página 29
FUNCTIONAL DESCRIPTION
DESCRIPTION DES FONCTIONS
DESCRIPCIÓN FUNCIONAL
Fig. 1
AB
C
D
E
F
G
H
M
N
O
I
JK
L
A6.35 mm (1/4”) hex quick connect chuckMandrin de connexion rapide hexagonal de 6,35 mm (1/4")Mandril hexagonal de conexión rápida de 6,35 mm (1/4")
BNose protectorProtection du becProtector del morro
CForward/Reverse leverLevier d’inversion marche avant/marche arrièrePalanca de avance/marcha atrás
DBelt hook lock...

- 3 -  
I.  GENERAL  SAFETY 
RULES
 WARNING! Read all instructions
Failure  to  follow  all  instructions  listed  below may  result  in  electr ic  shock,  fire  and/or serious  injury.  The  term  "power  tool"  in  all of  the  warnings  listed  below  refers  to  your mains  operated  (corded)  power  tool  and battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
Work Area Safety
1) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
2) Do  not  operate...

- 4 - 
5) Maintain  power  tools.  Check  for  misalign-
ment  or  binding  of  moving  parts,  breakage 
of  parts  and  any  other  condition  that  may 
affect the power tools operation. If damaged, 
have the power tool repaired before use.
Many  accidents  are  caused  by  poor ly 
maintained power tools.
6)  Keep cutting tools sharp and clean.Properly  maintained  cutting  tools  with  sharp 
cutting  edges  are  less  likely  to  bind  and  are 
easier to control.
7) Use  the  power  tool,...

- 5 -  
 WARNING! Some  dust  created  by  power  sanding,  saw-ing, grinding, drilling, and other construction activities  contains  chemicals  known  to  the State  of  California  to  cause  cancer,  bir th defects  or  other  reproductive  harm.  Some examples of these chemicals are:• Lead from lead-based paints• Crystalline  silica  from  bricks  and  cement and other masonry products• Arsenic  and  chromium  from  chemically-treated lumber.To  reduce  your  exposure  to  these  chemi-cals:  work...

- 6 - 
23)Do  not  shor t  the  battery  pack.  A  battery short  can  cause  a  large  current  flow,  over 
heating  and  create  the  risk  of  fire  or  per
-
sonal injury.
24)NOTE:  If  the  supply  cord  of  this  appliance  is  damaged,  it  must  only  be  replaced  by  a 
repair  shop  authorized  by  the  manufacturer, 
because special purpose tools are required.
25)TO  REDUCE  THE  RISK  OF  ELECTRIC SHOCK, THIS APPLIANCE HAS A POLAR-
IZED PLUG (ONE BLADE IS WIDER THAN 
THE OTHER).
This plug...

- 7 -  
The  light  illuminates  with  ver y  low  cur-rent,  and  it  does  not  adversely  affect  the performance of the driver during use or its battery capacity.
How to use the belt hook
 WARNING! • Be  sure  to  attach  the  belt  hook  securely to  the  main  unit  with  the  screw  fir mly fastened. When the belt hook is not firmly attached  to  the  main  unit,  the  hook  may depart and the main unit may fall.  This may result in an accident or injury.• Periodically  check  screw  for...

- 8 - 
 To  control  the  shut-off  torque  used  to tighten  screws  and  bolts  for  manufac-turing and assembly.
 Do  not  use  the  digital  clutch  when tightening  screws  with  a  low  tighten-ing torque into materials, such as thin plastic.Example application not to be used; When tightening screws into lightweight steel  sheet  which  thickness  is  0.8  mm or less. When tightening screws into soft surface materials,  such  as  interior  finishing materials.
 One-shot impact function : C
→Set...

- 9 -  
NOTE:∗ The  one-shot  impact  function  operates after  impact.  Over-tightening  may  occur when tightening screws into soft materi-als as the tool does not impact.
Using the one-shot impact function
When the trigger switch is released and  it  is  depressed  fully  within 1  sec.,  one-shot  impact  func-tion  operate.  Then the  one-shot impact LED light will blink.
Wait at least 1 sec. after trigger  is  released,  not to  operate  the  one-shot impact function.
Keeping the bit head to the...

- 10 - 
Clutch setting andoperating impact forceImpactPower ModeDisplay      
SoftMediumHardH  
SoftMediumMediumM  
SoftSoftSoftS  
Important remarks when using 
the  digital  clutch  and  one  shot 
impact functions
The  digital  clutch  setting  could  be  used 
only  as  a  guideline.  The  suitable  setting 
will  var y  depending  on  the  hardness  of 
the material, the force being applied to the 
tool, and the type of screw.
Uneven  material  hardness  could  result  in 
less-tightening  or...