Panasonic Electronic Touch Pen For Plasma Tv Ty-tp10u Operating Instructions

Operating Instructions
Electronic Touch Pen 
for Plasma TV
 Model No. TY-TP10U
ENGLISH
FRANÇAIS
ESPAÑOL
TQZJ489 

ENGLISH
2
Thank you for purchasing a Panasonic product.    
The Electronic Touch Pen for plasma TV (hereafter referred 
to as “Touch Pen”) can be used only with a Panasonic plasma 
TV to which application for Touch Pen operation has been 
installed.
Before using, attach the supplied Bluetooth adaptor to 
a plasma TV which is not equipped with the Bluetooth
® 
communication function.
* For the types of plasma TV compatible with this kit, visit 
Panasonic Homepage....

ENGLISH
3
Disassembly
  

ENGLISH
4
Touch Pen
  

ENGLISH
5
FCC STATEMENT
This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee...

ENGLISH
6
Using Precautions
Cautions
   
Do not use devices that emit strong electromagnetic waves 
(such as cellular phones or personal transceivers) near 
the Touch Pen. Doing so may cause the Touch Pen to 
malfunction.
   
The Touch Pen cannot operate fully at high or low 
temperatures. Please use within the specifi ed usage 
temperature range (
 page 14).
For comfortable use
   
Stop using the Touch Pen immediately if your skin feels 
unusual.
In rare cases, the paint or materials used in the Touch...

ENGLISH
7
IC STATEMENTThis device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must 
accept any interference, including interference that may cause 
undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry 
Canada (IC) radio frequency exposure limits.
Accessories
Bluetooth adapter...

ENGLISH
8
Inserting the battery
When the battery level is low, the indicator lamp blinks 5 times 
when the Touch Pen is turned on.
(Replacing the battery at an early stage is recommended.)
1.  Turn and slide the unit cover until the entire shape of the 
battery is visible.
Unit cover
2.  Insert the battery, and slide and turn the unit cover to close it.
Unit cover
   
Close the unit cover until it clicks.
NOTE
•  Use the specifi ed battery (AAA manganese battery or AAA 
alkaline battery).
•  Do not...

ENGLISH
9
Registration
Registration to the TV for this use is required when using the Touch 
Pen for the fi rst time after purchase or using it on another TV.
1.  Turn the (plasma) TV on to begin Touch Pen registration.
Before using, attach the supplied Bluetooth adaptor to 
a plasma TV if it is not equipped with the Bluetooth
® 
communication function. ( page 11)
•  For how to start registration of the Touch Pen, see the 
operating instructions of the TV.
2.  Press the power button with the Touch Pen...

ENGLISH
10
How to hold the Touch 
Pen
Hold the Touch Pen as shown in the fi gure.
   
Hold the center of the Touch Pen.
   
Lightly press the tip side of the Touch Pen vertically against 
the screen of the TV so that the tip is pushed in.
If the pen is largely tilted or the tip is not pushed in, it does not 
operate normally.
How to use the Touch Pen
Perform the following operations using the Touch Pen when 
selecting screen operation or items, or using software for Touch 
Pen.
Operation 
exampleHow to...