Panasonic Electronic Board Ub-7325 Operating Instructions

							Optional Wall-mounting Kit (KX-B063)
41
Installation Manual
■Wall-mounting procedure
1Confirm that the wall is strong enough to support the weight of the electronic board.
The wall must be capable of supporting at least 
1,275N [130 kgf (287 lbs.)] for UB-7325.
2Tape the Wall-mounting template on the wall.
• Do not use the template included in the wall-mounting kit (KX-B063), but rather the one included with 
the electronic board (UB-7325).
• When taping the template on the wall, make sure it is level.
31) Drill holes in the wall for the wall-mounting fixtures (8 holes total).
• Holes on the wall-mounting fixture are 7 mm (1/4") in diameter.
2) After removing the wall-mounting template, attach the wall-mounting fixtures 
with the appropriate wall-mounting hardware (two screws in each fixture).
* This hardware must be locally procured, it is not included in the kit.
• Refer to the section “Attaching the wall-mounting fixtures” (page 42) for drilling in the wall and attaching the 
mounting fixtures.
• Refer to step 3 on page 32 for mounting the electronic board.
Caution
Wall-mounting
fixture L
Wall-mounting template
(provided with UB-7325)
Wall-mounting 
hardware*
Wall-mounting 
hardware*
Wall-mounting
fixture R              
812.8 mm(28)
762
mm (
26)
50 mm(1 31/32)
70 mm
(2 3/4)  
2
1
Wall-mounting
fixture L1
(See page 30.) 
						

							Optional Wall-mounting Kit (KX-B063)
42
■Attaching the wall-mounting fixtures
The electronic board must be mounted with the method most suited to the material of the wall.
Three methods are presented here.
(Other options may be available in your area.)
●
Attaching to metal or concrete walls
Stud plugs (sold in stores) are needed.
Drill eight holes in the wall.
For the correct hole size, refer 
to the instructions for the 
particular stud plugs used.
Insert each bolt through a hole 
in the wall-mounting fixture and 
tighten until the wall-mounting 
fixture is securely fixed to the 
wall. Drill bit
Metal or concrete
wall
Stud plug
Insert a stud plug in each hole.
Wall-mounting
fixture
Bolt 
						

							Optional Wall-mounting Kit (KX-B063)
43
Installation Manual
●Attaching to plasterboard walls
Split-wing toggles (sold in stores) are needed.
●
Attaching to wooden walls
Use wood screws (sold in stores).
Insert each bolt through a hole 
in the wall-mounting fixture and 
into the hole in the wall beneath 
so that the arms of the split-
wing toggle are horizontal. For 
the correct hole size, refer to the 
instructions for the particular 
split-wing toggles used.
After the arms expand, pull the 
wall-mounting fixture out until 
the arms of the split-wing toggle 
grip firmly into the wall.
Tighten each bolt until the wall-
mounting fixture is securely 
fixed to the wall. PlasterboardSplit-wing toggle
Wall-mounting
fixture
Bolt
ArmsArms
For the correct hole size, refer 
to the instructions for the 
particular wood screws used. Wall-mounting fixture
Wood screw
Wooden wall 
						

							Panasonic Digital Document Company
A Unit of Matsushita Electric Corporation of America
Two Panasonic Way, Secaucus, New Jersey 07094
© 2004 Panasonic Communications Co., Ltd.
Printed in Japan
PJQXC0016ZA  F0904B0