Panasonic Dvd Vcr DeckPv D4761 Operating Instructions

[email protected]
Insert a tape with a record tab (p. 6).
1DECK power comes on.
The VCR mode and “VCR” Indicator light up
on Multi Function Display.
5 4 2
3
Press CH /, or NUMBER keys
to select the channel.
For “LINE” input, see p. 39.
If channels is over 100, press 100 key then press
the remaining 2 digits.
Press SPEED
to select the record speed (p. 6).
SP = Standard Play            LP = Long Play
SLP = Super Long Play
Press REC
to start recording.
(The VCR REC Indicator lights up on Multi...

22For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
T I TLE  MENU
Cas t l es
Love
 r s
Dogs
B
 i r ds
5Press   orNUMBER keys (see
below) to select title,
and
press 
SETto play.
Basic DVD Operation
Ready Checklist
All connections are made. (pp. 12 ~ 15)
DECK is plugged in.
If DECK is connected to an audio amplifier,
turn the stereo system’s power on.1Press POWER* on the remote or DECK.
Press
 DVD to select DVD mode.
Press 
OPEN/CLOSE,
and then place a...

[email protected]
Basic
Operation
(DVD)
Please read the disc jacket for operation
information.
If a single sided disc is placed in upside down,
“PLEASE CHECK THE DISC, AND FOR STAINS
OR SCRATCHES ON DISC” is displayed.
Remove a disc and press DECK POWER off
when not in use.
Disc continues to rotate with menu displayed
even after play is done. Press STOP to clear
menu display when finished with menu.

Forward/Reverse Scene Search
Press FF/SLOW+ or REW/SLOW-during Play mode.
Press 
PLAY to release....

24For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Timer Recording
ADD/DLT
Press PROG/VCR+ button*
to display “SET PROGRAM.”
Press PROG/VCR+ button
to end programming.
43 1
DAILY
131
31
12
SELECT     /      
Selection Order
WEEKLY
(SAT)WEEKLY
(MON) WEEKLY
(SUN)
14
Example
Today
2) To set remaining items,
press 
to select and
press SET
to set START/ STOP times,
CH(channel) or
LINE input (p. 39), and
tape speed (SP, LP, SLP).
Press PROG/VCR+ button
to...

[email protected]
To Replace program...
To Clear program...
Review, Replace or Clear Program Contents:
(Recording is not in progress)
or
CANCEL   : ADD / DLT SELECT   1-8 :               
ENTER     : SET
EXIT         : PROG
P  DT  START    STOP    CH  SPD1    7     9 : 00A 12 : 00A   08     SP2     8  10 : 00P  12 : 00P    02    SP3   10    8 : 00P    9 : 00P   10    SP4   SU    9 : 00P  10 : 00P    L1    LP
CANCEL   : ADD / DLT SELECT   1-8 :               
ENTER     : SET
EXIT         : PROG
P  DT...

26For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
1
In order for VCR to read PlusCode numbers, some setup is required. Guide channel numbers
are assigned to each local broadcast and cable station.
Because this number sometimes differs from the channel your TV receives the station on, it is
necessary to program the VCR with local channel information.
To receive VCR Plus+ channels automatically, perform the steps below.
Or, see “Manual VCR Plus+ System...

[email protected]
Auto VCR Plus+ System Channel Setup (Part 2)
Press   to select channel map for
your area and
press SET.
Before you perform the following steps, you should have:
completed “Auto VCR Plus+ System Channel Setup (Part 1)” on p. 26.
left VCR off overnight, and turned it back on after 9:00 AM the next day.
If channel updatingwas successful...If VCR could notdistinguish channel map...
Press ACTION
to exit this mode.Press ACTION
to display “SELECT
VCR Plus+ CH”
Continue with step 2.
To...

28For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
GUIDE CH          RECEIVE  CH01                             --02                             --
VCR  Plus+  CH  SET  UP
CLEAR   :ADD/DLT
SELECT :                  SET:SET
EXIT       : ACTION
To enter VCR Plus+ channels,
Manual VCR Plus+ System Channel Setup
5
2
3 1
Initial Setup.....In order to use Timer Recording Using VCR Plus+ System, the Initial Setup on pages 16, 17 must
be completed for setting...

[email protected]
To Make Corrections,
press  repeatedly
to delete number, then
repeat step 3.
Press PROG/VCR+ button
to display “SET PROGRAM.”
Press PROG/VCR+ button
to end program.
Press to select record speed,
and
press SET.
3 2 1
4
5
6
Do normal Timer Record if...
PlusCode number is not listed for
program.
the program (e.g. sports event)
may run over set stop time.
See p. 25 to:
cancel Timer Recording in progress.
review, replace, or clear program
contents.
Important for DSS/ Cable Box Users...

30For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
MONO broadcast
Normal monaural sound broadcast.
SAP broadcast
Secondary Audio Program (sub
language) broadcast. Select SAP
audio mode for the sub language.
MTS Stereo broadcast
Multi-channel Television Sound
Stereo broadcast. Select STEREO
audio mode.
If stereo broadcast is weak and
display flickers, select MONO audio
mode for possible better results.
MTS Stereo and SAP broadcast
Multi-channel...