Panasonic Dvd Vcr DeckPv D4761 Operating Instructions

[email protected]
REC         1 2 : 0 0AM0 : 25ABC   -0 : 1 2 : 3 4 SPSTEREOSAPMONO
VCR Status & Clock DisplayBlank Tape/ No Video Signal
Indication
Whenever a blank section of a tape
comes up in Play mode, or when the
selected channel has no broadcast
signal with Weak Signal Display
Feature (p. 37) set to OFF, the TV
screen will turn solid blue.
Function Status
Rec Time Remaining
(OTR mode only,
see p. 21.)
0 8
Current Time
Channel
Tape Speed
(See p. 6.) Broadcast Audio
Being Received
(See p. 30.)...

12For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Connections
1 Disconnect antenna or cable from TV
and connect to DECK.
WARNING
When using “Nut type” RF coaxial cables, tighten with fingers
only. Overtightening may damage terminals.
Basic Connections
Connect DECK and TV with an RF Coaxial Cable a(supplied) or an AV Cable b
(not supplied) as shown in the figure below.
If your TV has AUDIO and VIDEO IN terminals, connect them to DECK with AV Cable...

[email protected]
You CannotYou Can
record and view
both scrambled
and unscrambled
channels if
additional
equipment is
added. This
connection
requires: two
converter boxes,
an A/B switch,
and a 2-way
splitter.view channel
other than the
one selected
for any type of
recording.
do a Timer
recording of a
channel unless
you select it on
the Cable Box.IN FROM ANT.
OUT
 TO TV
IN 1
VHF/UHF
OUT
IN 2 IN 1
Cable Box
OUT IN OUT 2 OUT 1
2-Way Splitter
OUT
A/B Switch IN

 

 


      
  Connect With Two Cable...

14For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Connections (continued)
Notes on Audio Output from the Optical Digital Audio Output Connector
Enjoying Digital Audio Output from the Digital Audio Output Connector
*1 The type of audio output from the connector can be selected by the Settings for DVD Operation.
(See p. 50.)
*2 Sound having 96 KHz sampling is converted into 48 KHz sampling when it is output
from the DECK’s optical digital audio output...

[email protected]

 DECK       
  Decoder with Dolby Digital       
  Amplifier       
  Speaker
or
dts (digital theater systems)
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or
dts bitstream is output from the DECK optical digital audio output connector. When
DECK is connected to a Dolby Digital decoder or dts decoder, you can enjoy
theater-quality audio in your home. [An optical digital audio cable (optional) is
required when an optional Dolby Digital decoder or dts...

16For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Before doing Initial Setup
How to do Initial Setup
Initial Setup for Basic Connections
1
2Press VCR button* on the remote for VCR mode.
Press POWER to turn DECK on.
When DECK is turned on for the first time,
SELECT LANGUAGE screen appears.
If wrong language is set, or there is not
Language Display, do “Reset All Memory
Functions” steps on p. 17.
If screen does not appear, check connection
between...

[email protected]
*Important:If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
Initial Setup
(Connection)
Press CH 
to start “CHANNEL/CLOCK AUTO SET.”6
Settings are performed automatically.
Case 1   Setup complete...
Press CH 
to exit.Case 2   Setup Incomplete...
Press ACTION
to display Manual
Clock Set screen.
7
Press to select the month
and
press SET.
In the same manner,
select and set the
date, year, time, and
DST (daylight saving...

18For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
SELECT :              EXIT         : ACTION SET : SET
                MENU
SET  UP  DVD
SET  UP  VCR
SET  CLOCK
SET  UP  CHANNEL
IDIOMA/LANGUE : ENGLISH
VCR’S OUTPUT CH:3
Clock
2)Press  to select
“MANUAL,” and press SET.
(For Auto Clock Set, select
“AUTO CLOCK SET,” and
press SET. Press CH 
.)
4) Press ACTION twice to
start Clock and exit this
mode.
(“TIME ZONE ADJUST”
appears only when auto
clock is...

[email protected]
Add or Delete a Channel
To add channel:
Select channel with NUMBER keys
and press ADD/DLT.
To delete channel:
Select channel with CH 
/ or
NUMBER keys
and press ADD/DLT.
CHANNEL  08  ADDED
CHANNEL  08  DELE TED
Time Zone Adjust
2)Press  to select
“TIME ZONE ADJUST,”
and press 
 or  to
subtract or add hour(s)
as necessary.
VCR’s Output
Channel
1) Press  to select
“VCR’S OUTPUT CH.,”
and press SET.
SELECT :                 EXIT         : ACTION SET : SET
               MENU
SET  UP...

20For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Playback/ Record on a Tape
Insert a tape.
DECK power comes on.
The VCR mode and “VCR” Indicator light up
on Multi Function Display.
If tape has no rec. tab (p. 6), auto play begins.
Special Features During Play
These features work best in SP or SLP mode.
The sound will be muted.
To reduce picture noise, see “Manual Tracking
Control” on p. 6.
After DECK is in Still or Slow mode for 3 minutes,
it...