Panasonic Dvd Vcr DeckPv D4761 Operating Instructions

[email protected]
Audio Mode for Recording
1
2
Do a recording.
See p. 21.
3
Audio Mode for Playback
Start playback.
See p. 20.
Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo
tapes will playback in monaural sound.
To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to
a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14, 15.)
If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio....

32For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Multi-Brand Control Feature
The Remote Control can be set to control some TV and
Cable Box/DSS functions.
Find your TV and Cable Box/DSS Receiver
Brand Code Number on the following page.
Setup for TV control,-->hold down TV button,
-->enter code with NUMBER keys.
Multi-Brand Control Setup
Confirm code entry,
-->press POWER to turn selected unit on or off.
 See table below for controllable functions in...

[email protected]
Due to changes in infra-red commands used by manufacturers, some brands have several
codes. If your unit does not respond to the first code, please try the next one.
Some TV, Cable Box and DSS Receiver brands require you to turn on the power manually.
Cable Box Brand Code Numbers
Panasonic ........................ 01, 02
Quasar............................. 01, 02
RCA ....................................... 03
GE ......................................... 03
Zenith...

34For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Index Search
Note
If Index Search is started very close to
an index mark, that index mark may not be
counted in the search.
1
2
Tape Operation
Search System
For each recording, an invisible index mark is placed on the tape. A program index and
information are also included for timer recordings. These marks are used to access or
scan recordings.
1
Program End Search
2
Fig. 1
Fig. 2
Fig. 3
Note
Locates...

[email protected]
 Auto Play
Insert a tape -->Power comes on,
-->Play starts if no record tab
(see p. 6).
 Auto Rewind
Play
Manual Record   -->Tape end -->Rewind
Fast Forward
 Play Auto Eject
(Repeat Play must be off)
Play -->Tape end -->Rewind
-->Tape ejects if no record tab
If Timer Program is set, “Play Auto Eject”
will operate with or without a record tab.
Auto Operation Functions
Commercial Skip
VCR fast forwards (skips) over 1 ~ 3 minutes
of recorded tape.
1
Press CM/ZERO in Play mode....

36For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Tape Operation (continued)
Repeat Play
Set to playback a recording over and over.
Zero Search
To quickly return to a specified tape location.
Continue to record, playback etc.
Press STOP.
DECK will go into FF or REW mode and stop
at the last point the Counter was set to 0:00:00.
5 4 3 2 1 32 1
SELECT :              EXIT         : ACTION    SET : SET
                MENU
SET  UP  DVD
SET  UP  VCR
SET...

[email protected]
Weak Signal Display Feature
When “ON,” picture is displayed regardless of signal
strength.
Auto Shut-Off Feature
When set to ON, DECK shuts off if blank tape is
played or no signal is detected for 5 minutes. When set to ON, all operations except
for timer record and tape eject are
prohibited. Useful for households with
small children.
3 1
VCR Lock Feature
VCR  LOCK  ACT I VATED
VCR  LOCK  OFF
VCR Lock cancels in 24 hours if
clock is set.
4REC To turn off, repeat above.
ON: Picture...

38For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
                                              
DETECTING TAPE POSITION 
Special VCR  Features (continued)
INPUT
ACTION
SET
TAPE
POSITION
SELECT 
Weak Signal Display ON/OFF FeatureTape Position and Tape Status Feature
Note
To find out the present tape position and amount of tape remaining.
Tape position cannot be detected for VHS-C Cassettes,
tapes under 30 minutes, and some other tapes.
Press TAPE...

[email protected]
Copying Your Tapes  (Dubbing)
1Insert a pre-recorded tape.
2
Insert a blank tape with record tab.
Press REC, then PAUSE/STILL
immediately to enter REC/PAUSE
mode.
3
Press INPUT to set DECK Input mode to
LINE for Video Input.
(See “Selecting the Input Mode” below.)
4
Press PLAY to start dubbing.
Playing VCR starts playback.Press PAUSE/STILL to start dubbing.
DECK starts recording.
Press STOP to stop dubbing.
Caution:Unauthorized exchanging and/or copying of copyrighted recordings...

40For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
AUD I O :3  ESP3  ESPDolby  Digital  3/2.1ch
SELECT
SELECT:  :  SESET:T:SETSET
Hola
AUDIO:1  ENG
Dolby  Digital  3/2.1ch
SELECT
:  SET:SET
Hello
ESPESP
Te amoTe amo
• If after several presses of the button the language does not
change, language selection is not offered on the disc.
 When power is turned on again or disc is removed, subtitles
revert to initial setting language. If the initial language...