Panasonic DP 8060 User Manual

							
51
Making Copies
Paper Size∗
Paper Tray
Cover Page mode
Cover (Front) Cover (Front+Back)
Blank
Copy
Paper Size ∗
Paper Tray
Page Insertion mode
Blank
CopySet the insert page position with the
Keypad. ∗∗
If selecting other position, move
the sheet with
  /  buttons, then set
the insert page position with the Keypad.
34
Number of Copies
(Max. 999)
34
5
NOTE∗The size and orientation of the printed copy and recording paper should match.
∗∗Blank page is inserted before the indicated selected page number.
Downloaded From ManualsPrinter.com Manuals 
						

							
52
Making Copies
OHP2
21
+(2)(1)
+
OHP(2)OHP2OHP(1)(2)(1)21
+(2)(1)
+
OHP1
OHP1
OHP2
21
+
OHP(2)OHP2OHP(1)(2)(1)21
+
OHP1
OHP1
Inserts Blank/Copied pages between Transparency
film. Blank page
Copied page
Original Blank
page
Original Copied page
ADF only
Inserts Blank/Copied pages between Transparency
film and make copied sets for handouts.
Blank page
Copied page
Original Blank
page
Original Copied
page
ADF only
Hand-
outs
Hand-
outs
12
12
NOTE●Certain types of transparency film may not be compatible with, and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-standard paper types.
(Panasonic has tested 3M PP2500 transparency film and found it to be compatible.)
Insertion/Overlay
■
■ ■
■
■  OHP Interleaving
■
■ ■
■
■  Presentation
(OHP: Transparency film)
(OHP: Transparency film)
Downloaded From ManualsPrinter.com Manuals 
						

							
53
Making Copies
Paper Size∗
Paper Tray
OHP Interleaving mode
Blank
Copy
Number of Copies
(Max. 999)
Presentation modeBlank
CopyNumber of Copies
for handouts
(Max. 999)
Load
Transparency
film onto the
Sheet Bypass
Load
Transparency
film onto the
Sheet Bypass
345
345
(OHP: Transparency film)
(OHP: Transparency  film) Paper Size
∗
Paper Tray
NOTE∗The size and orientation of the printed copy and recording paper should \
match.
Downloaded From ManualsPrinter.com Manuals 
						

							
54
Making Copies
Insertion/Overlay
The first original is used as an overlay for the
remaining originals.
The first page is called the overlay original, and the
second page onwards are called the scanned
originals, respectively.
For overlay original
NOTE:
●When  MARGIN  is selected, a binding margin
is also set for the overlay original.
● When  COVER  or PAGE INSERTION  is
selected, if the cover page and insertion pages
are set to be copied, the overlay is not
executed for Blank pages. If these pages are
set to be copied, the overlay is executed for
copied pages.
or
12
Up to three  
editing functions available in the File
Edit feature.
: To Add a new file
HDD = (Max. 5 files)
: To Erase a registered file
: To Change the title of a file
12
or
(Register only)
One image file can be registered.
Up to 5 image files can be registered on
the Hard Disk Drive.
If the selected File Key already contains a
registered file image, the new image will
overwrite the current image.
Without HDD, when pressing FILE EDIT
button, the machine skips Step 3 and
proceeds to Step 4 (Erase Mode).
67
■
■ ■
■
■  Overlay
■
■ ■
■
■  File Edit
(Register only)
File Name
(Register only)
Downloaded From ManualsPrinter.com Manuals 
						

							
55
Making Copies
345
Density for 1st page imageorNumber of Copies
(Max. 999)From Platen:
Same procedure
as for Form
Overlay.
(See page 56 and
57)Select the overlay image to store
into memory for later use.
or
Enter File Name as below step 8
of File Edit.
34
Select a file
6
or
Enter the file
name
5
To cancel the registration,
touch CANCEL button.
Density for
registered
image
or
or
8
4
4
5
(Register only)
(Register only)
Downloaded From ManualsPrinter.com Manuals 
						

							
56
Making Copies
Insertion/Overlay
Overlay an image stored in memory onto the copy.
FORM
Data
The scanned
original
NOTE:
● Only Letter size is available for Form Overlay.
● If the orientation of the original is different than
of the Form, the original is copied by
automatically rotating when overlaid.
● The Form will not change size, and cannot be
enlarged or reduced.
However, the scanned original image can be
reproduced according to the selected settings
(Enlarged/Reduced using  ZOOM, or Paper
Size selection).
● Even if the  EDGE or BOOK  is selected, the
edge and center erasing functions are not
performed for the overlay original.
● When  MARGIN  is selected, a binding margin
is also set for the overlay original.
● If  BLANK  is selected for the  COVER or
 PAGE INSERTION  setting, overlay will not be
performed. The image overlay is carried out for
 COPY  pages instead.
12
or
■
■ ■
■
■  Form Overlay
Downloaded From ManualsPrinter.com Manuals 
						

							
57
Making Copies
34
Select a fileNumber of Copies
(Max. 999)
From Platen:
If “Another Original? message is
displayed, touch the YES or “NO”
button.
Ex: 2 originals
Touch YES button.
Place the next original on the
Platen.
3Press Start Key.
4Touch NO button.
Downloaded From ManualsPrinter.com Manuals 
						

							
58
Making Copies
Other Features
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.Storing the
copy job
1To store a job inmemory
1To recall a job storedin memory
or
NOTE● JOB MEMORY mode will not be deleted even if the power switches are turned Off.
● When storing a new job into a programmed memory location, the previously stored job will be
overwritten and erased.
● M1, M2 can use as manual skyshot mode by setting the user function mode.
Recalling the
copy job
■
■ ■
■
■  Job Memory
NOTE:
When the M5 Key is used, the Double Exposure
Mode should be set to Off in the  Copier
Settings  19 Double Exposure. (See page 73)
Ex:To store a
job (2 sided
original to 1
sided copy)
in memory.1
4
Downloaded From ManualsPrinter.com Manuals 
						

							
59
Making Copies
2
M1, M2, M3, M4, M5(See NOTE on page 58)
23
M1, M2, M3, M4, M5
(See NOTE on page 58)Number of Copies
(Max. 999)
23
or
56
4
M1, M2, M3, M4, M5
Downloaded From ManualsPrinter.com Manuals 
						

							
60
Making Copies
NOTE●When using the double exposure mode, the M5 is turned On and other job requiring memory
cannot be used.
● The default setting of Double Exposure Mode is ON in the Copier Settings 19 Double
Exposure. If this setting is changed to OFF, this mode cannot be used\
.
Select  Double Exposure  copy mode when copying
a 2-Sided original that is smaller than Invoice size
onto one side of a standard size media (Ex: Letter
size). One side (Front) of the original is copied at the
top of the page, and the other side (Back) is copied
at the bottom on the copied page.
NOTE:
●If the ADF is opened during Double
Exposure copy mode, an incorrect position
detection of the original may occur when a
strong light shines onto the glass.
● An incorrect exposure may occur when
there is a black line at the edge of the
original, or an image which the machine
interprets as a black pattern in this mode.
● The final copy may be affected if colored
background original(s) do not have a white
edge, or if they are less than 2 mm wide.Original Size:
Maximum Invoice
Copy Size:
Letter
Ex.  Invoice
Front Side
Image
Back Side
Image
1
4
 Front Side of Original
 Original Size:
Free, maximum Invoice size
 Opening the ADF
 Fit original to the Original Guide.
Original Guide
NOTE:
If “YES” is selected, the machine
will start copying only scanned
original.
Other Features
■
■ ■
■
■  Double Exposure
Downloaded From ManualsPrinter.com Manuals