Panasonic DP 8060 User Manual

							
31
Making Copies
23
4
5
Reduction/
Enlargement only
(Letter-R or
Ledger size)
 Default copy size is reduced, copy size can beselected as 100 % or reduced.
 Refer to 11 Booklet Default Mag. of the  Copier
Settings . (See page 73)
Number
of Copies
When the Fold Position is not matched with center
position of the copies, set the binding margin. Refer to
15-17 Fold Position of the  General Settings (For Key
Operator) . (See page 77)
The stapled copies are delivered to the
saddle tray of the 1-bin saddle finisher as
shown below.
Saddle tray
Staple position
Downloaded From ManualsPrinter.com Manuals 
						

							
32
Making Copies
2-Sided/Original  Copy
Use this function when copying mixed size originals
(Ledger or Letter and Legal) using the ADF, original
size can be detected automatically then can be
copied to the same size or one specified size.
The followings are examples of Original and Copy
images when Multi-Size Feeding and 1 
 2 Copy
mode are combined.
Originals CopiesFull Size ReductionEnlargement
Legal Legal Letter-R/In
voice Ledger
Letter-R Letter-R Letter-R/In voice Ledger
Ledger Ledger Letter/Letter-R
—
Letter Letter Letter/Letter-R
Originals CopiesFull Size Reduction
Legal Legal Letter-R
Letter-R Letter-R
Ledger Ledger Letter/Letter-R
Letter
1
Combination of Multi-Size Feeding (1 1)
Combination of Multi-Size Feeding (1
 2)
2
Reduction/
Enlargement
only
Copy size is set to Letter.
Copy size is not set. Copy size is set to Letter.
Copy size is not set.
Ex.
Combination of Letter (Portrait layout) and
Ledger (Landscape layout) originals
Ex. Combination of Letter (Portrait layout) and Legal
(Portrait layout) originals
■
■ ■
■
■  Multi-Size Feeding
Original Images
Letter
(Portrait)
Ledger
(Landscape
layout)
Legal(Portrait)Letter(Portrait)
Downloaded From ManualsPrinter.com Manuals 
						

							
33
Making Copies
453
Bind position
or
Number
of Copies
FaceBack
Copy Images (1  2 copy mode)
Ex.   Bind Position is SHORT EDGE
*1 Ledger size will bereduced to Letter size.
*2 Legal size will be reduced to Letter size.
Ledger
(Landscape
layout)
Letter
(Portrait)
Letter*1(Landscape
layout)
Legal(Portrait
 layout)
Letter(Portrait
layout)Letter*2(Portrait
layout)
Letter(Portrait
layout)Blank
Letter
(Portrait)Blank
Downloaded From ManualsPrinter.com Manuals 
						

							
34
Making Copies
2-Sided/Original  Copy
Special originals (like thin paper, etc.) can be fed
from the ADF Tray and copied continuously using
the Job Build and SADF Mode.
If the Job Build and SADF buttons are not shown
on the Touch Panel display, the Job Build and
SADF Modes must be enabled in the copier
function settings. Please consult with the Key
Operator. (See page 80)1
5
Place one Original
at a time or up to 85
sheets (20 lb)/Letter
70 sheets (Ledger/
Legal/Invoice)
2
Reduction/
Enlargement
only
Place the next original within 5 sec. of
last ejected copy.
If 5 sec. is passed, Another Original?
YES or NO message will be displayed.
Select YES button to continue copy
job.
Example: To make 5 sets of sor ted copies of
100 sheets of originals. (Letter size)
85
100
1
86 100
1
Originals: 85 
sheets

Originals: Remaining 15 sheets
1
st and 2nd Scanned Data
are combined into one job.
5 sets of 100 sheets
sorted copies are printed
1
5
2
Place the first 85 sheets
of originals on the ADF
Tr a y.
Place the next original within 5 sec. of
last ejected copy.
(15 sheets)
If 5 sec. is passed, Another Original?
YES or NO message will be displayed.
Select YES button to continue copy
job.
■
■ ■
■
■  Job Build and SADF Mode
Downloaded From ManualsPrinter.com Manuals 
						

							
35
Making Copies
5
6
3
Number
of Copies
4
When all the pages are read by the ADF,
Another Original? YES or NO message
appears.
Select the NO button.
5
6
3
Select Sorting/Finishing settings
oror etc.Number of
Copies
(
Ex.  5)
4
When all the pages are read by the ADF, after
approximate 5 seconds Another Original? YES
or NO message appears.
Select the NO button.
Downloaded From ManualsPrinter.com Manuals 
						

							
36
Making Copies
Sort/Finish
1
1
1
1
1
1
3
1
2
1
1
1
3
1
2
Multiple copy sets are sorted
automatically. When loading both Letter and
Letter-R sized paper, multiple
copies of individual pages are
stacked in alternate direction
(rotation of 90 degrees).
(Letter size only)
When optional Finisher is installed.
Offset stacking using electronic
sorting
● DA-FS330 (Letter/Lower Bin only)
● FS355A/FS600/FS605
(Letter, Letter-R, Legal, Ledger) When optional Finisher is installed.
Offset stacking using electronic
sorting
●
DA-FS330 (Letter/Lower Bin only)
● FS355A/FS600/FS605
(Letter, Letter-R, Legal, Ledger) When optional 2-Bin Finisher
(DA-FS330)/Punch Unit (DA-
SP31/SP41) is installed.
Sort by punched sets.
(Letter/Ledger)
●
DA-SP31 for DA-FS600/605
DA-SP41 for DA-FS355A
Copy is stored on the Tray.
When loading both Letter and
Letter-R sized paper, multiple
copy sets are sor ted
automatically and stacked in
alternate direction
(rotation of 90 degrees).
(Letter size only)
When optional Finisher is
installed.
Sort by stapling sets. Staple Positions:
DA-FS330
Top left corner (1 position/
Lower Bin only)
(Letter size only)
DA-FS355A/FS600/FS605
(except Invoice size)
●
Top left corner (1 position)
● Left (2 positions)
● Bottom left corner (1 position) When optional 1/2-Bin Saddle-
Stitch Finisher (DA-FS355A/
FS605) is installed and Booklet
mode is selected. (See page 30)
●
Original Size: Invoice/Letter only
● Maximum Originals (Images):
  DA-FS355A : 40 images
  DA-FS605   : 60 images
Sort/Finish
Non-Sort
Sort Rotate-Sort Rotate-Group
Shift-Sort Shift-Group Punch
Staple Sor t Saddle-Stitch
■
■ ■
■
■  When using Sort Mode
Available for Functions without an optional Finisher
Available for Functions with an optional Finisher
Downloaded From ManualsPrinter.com Manuals 
						

							
37
Making Copies
or
orSort modeor
or
When the optional Finisher is installed, this screen will change as follows:
For DA-FS330
or
When overflow           indicator appears on the display,
remove excess copies from the bin. ●Overflow
Number
of Copies
oror
For DA-FS600/FS605
ororor
oF
For DA-FS355A
123
Staple Position
Ex.  Top left corner
Original
ADF
Downloaded From ManualsPrinter.com Manuals 
						

							
38
Making Copies
Zoom/Effects
Copies with variable zoom ratios from 25 %
to 400 % in 1 % increments.
25%400%
1
or
2
The copy Zoom Ratio adjusts automatically to the
selected paper size.
Fit to paper length or width
Fit to paper length and width
12
Opening the ADF
wider than 45
degrees.
∗1
NOTE●If the margin around the original is 5 mm wide or less, the original may\
 not be correctly
detected, and the copy image may be unclear.
Zoom/Effects
■
■ ■
■
■  Zoom
■
■ ■
■
■  Auto Zoom
∗1:For Auto Zoom
An incorrect exposure may occur when there is a black
line at the edge of the original, or an image which the
copier interprets as a black pattern in the skyshot
mode.
An incorrect position detection of the original may occur
when a strong light shines onto the glass during skyshot
mode.
Downloaded From ManualsPrinter.com Manuals 
						

							
39
Making Copies
34
or
Same vertical and
horizontal ratio
25% - 400%
or
or Keypad Different vertical and
horizontal ratio
25% - 400%
or
or Keypad
orNumber
of Copies
∗2
∗2
35
Number
of CopiesEnlarged or reduced
according to the vertical/
horizontal size of the
paper.
Paper Size
(Paper Tray)
Enlarged or reduced
according to both
vertical/horizontal size of
the paper.
4
ATTENTION●
When changing the paper size after setting the zoom ratio, use the PAPER TRAY button.
If paper size is changed with Copy size key, zoom ratio will be changed.
∗2:Zoom Ratio
If using the keypad to set the zoom ratio,
press the CLEAR key first to reset the
current zoom ratio mode.
Downloaded From ManualsPrinter.com Manuals 
						

							
40
Making Copies
Zoom/Effects
Unnecessary edge can be erased by setting a blank
edge.
NOTE:
When ZOOM is selected, the erasing width
varies depending on the zoom ratio.
12
or
When copying original such as the center of folding
position may be shaded. This shade can be easily
eliminated.NOTE:
● When ZOOM is selected, the erasing
width varies depending the zoom ratio.12
NOTE●If the margin around the original is 5 mm wide or less, the original may not be correctly
detected, and the copy image may be unclear.
■
■ ■
■
■  Edge
■
■ ■
■
■  Book
Platen
Ex : Ledger size original
Letter
Ledger Ledger
Letter
∗
∗
∗ ∗
∗
∗For a Ledger size, Center the book
by length and width according to
the Letter size marks.
The shade is erased.
Downloaded From ManualsPrinter.com Manuals