Panasonic DP 8060 User Manual

							
41
Making Copies
3
or
Same vertical and
horizontal void value
5 - 99 mm
or
or Keypad Different vertical and
horizontal void value
5 - 99 mm
or
or Keypad
or
Number
of Copies
4
34
Number
of Copies
5 - 99 mm
or
or Keypad
Downloaded From ManualsPrinter.com Manuals 
						

							
42
Making Copies
Zoom/Effects
The original can be copied by setting a binding
margin on the edge or in the center of the paper.
or
The copying image can be centered automatically
on selected paper.
Opening the ADF
NOTE:
●
If a part of copied image is missing, change the
Margin Reduction setting to Yes. Refer to 03
Margin Reduction Def. of the  Copier Settings.
(See page 73)
● When OVERLAY or FORM OVERLAY is
selected, the binding margin is also set for the
overlay original.
● If this setting is made when 2-Sided copying is
selected, the print position comes out different
between the front and back side of copy.
12
12
■
■ ■
■
■  Margin
■
■ ■
■
■  Centering
● In Centering and
Image Repeat mode,
make copies with the
ADF open more than
45 degrees wide.
●
Remove the originals from the ADF before
selecting the Centering and Image Repeat mode.
An incorrect position detection of the original may
occur when a strong light shines onto the glass
during the Centering and Image Repeat mode.
Also an image which the copier interprets as a
black pattern in the Centering and Image Repeat
modes.
Downloaded From ManualsPrinter.com Manuals 
						

							
43
Making Copies
or
Number
of Copies
or Keypad
Margin area 5 - 99 mm
Number
of CopiesPaper Size
(Paper Tray)
34
34
Downloaded From ManualsPrinter.com Manuals 
						

							
44
Making Copies
Zoom/Effects
Creates multiple images on the sheet from single
sided original.
Minimum original size: 20 x 20 mm
Opening the ADF
The dotted line can be set to
“None” or “Print”. Refer to 18
Img. Repeat Dotted Line of
the Copier Settings . (See
page 73)
Negative/Positive image can be created for special
effects.
or
12
12
■
■ ■
■
■  Image Repeat
■
■ ■
■
■  Inverse
● In Centering and
Image Repeat
mode, make
copies with the
ADF open more
than 45 degrees
wide.
● Remove the originals from the ADF before
selecting the Centering and Image Repeat mode.
An incorrect position detection of the original may
occur when a strong light shines onto the glass
during the Centering and Image Repeat mode.
Also an image which the copier interprets as a
black pattern in the Centering and Image Repeat
modes.
Downloaded From ManualsPrinter.com Manuals 
						

							
45
Making Copies
Number
of Copies
Paper Size
(Paper Tray)
Number
of Copies
34
3
Downloaded From ManualsPrinter.com Manuals 
						

							
46
Making Copies
Zoom/Effects
The original can be copied with page numbers
printed.
1/8-1-ADF only*1
The original can be copied with a printed date. The
date is printed in MM/DD/YYYY format.
ADF only*1
08/01/2006
NOTE:
●The default is -n- (number) format. To change
to n/m (number/maximum) format, refer to 16
Page Numbering Style of the  Copier
Settings . (See page 73)
12
12
NOTE●When copying with the Stamping mode combined with N in 1 mode, the Stamping mode can
be used from the platen too.
● Only 1 stamp profile (page number, date, control number and character) can be selected to
print per scanning job; 2 or more cannot be selected.
● No stamp is printed on a blank page when an odd number of originals is copied with  1->2
setting is selected.
■
■ ■
■
■  Stamping (Page Numbering)
■
■ ■
■
■  Stamping (Date Stamp)
*1
Downloaded From ManualsPrinter.com Manuals 
						

							
47
Making Copies
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
or
Stamping start page
From 1, 2 or 3
Number of Copies
(Max. 999)
●Multiple copy sets will be
sor ted automatically.
ORIENTATION
Stamping position
Changing the stamp date
From 3rd page
From 2nd page
From 1st page
or
Select the CHANGE
button, and then move
cursor (_) to date with
 /  buttons, and
enter new date with the
Keypad.
34
34
Downloaded From ManualsPrinter.com Manuals 
						

							
48
Making Copies
Zoom/Effects
The original can be copied, and printed in
consecutive numbers from 001 to 999.
001
12
NOTE
■
■ ■
■
■  Stamping (Issue Number Stamping)
ADF only*1
● When copying with the Stamping mode combined with N in 1 mode, the Stamping mode can
be used from the platen too.
● Only 1 stamp profile (page number, date, control number and character) can be selected to
print per scanning job; 2 or more cannot be selected.
● No stamp is printed on a blank page when an odd number of originals is copied with  1->2
setting is selected.
*1
Downloaded From ManualsPrinter.com Manuals 
						

							
49
Making Copies
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
Stamping the starting
issue number
or
or
Keypad
(up to 999)
34
 
Downloaded From ManualsPrinter.com Manuals 
						

							
50
Making Copies
Insertion/Overlay
The original can be copied using other types of
paper as a Cover Page. Only the Front Cover, or
Front and Back Covers can be selected.Blank cover
Copied cover
2
211+
3243+4
121
Original Blank
cover
Original Copied cover Copied
cover
ADF only
Originals can be copied with other media inserted
between the specified pages.
You can copy specified pages (including the cover
page) on media such as colored paper set in the
Paper Tray, or on the Sheet Bypass.
Blank page Copied page
ADF only
12
12
5
Number of Copies
(Max. 999)
NOTE●Certain types of transparency film may not be compatible with, and may damage your machine.
Consult with an authorized Panasonic dealer for advice regarding non-sta\
ndard media.
(Panasonic has tested 3M PP2500 transparency film and found it to be compatible.)
■
■ ■
■
■  Cover
■
■ ■
■
■  Page Insertion
1
2
3
45
6
1
2
34
561
23 45
6
Downloaded From ManualsPrinter.com Manuals