Home > Panasonic > Printer > Panasonic DP 8035 User Manual

Panasonic DP 8035 User Manual

Here you can view all the pages of manual Panasonic DP 8035 User Manual. The Panasonic manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 181

181
Printout Journalsand Lists
3
The program list will be printed.
Explanation of Contents
(1) Key name
(2) Program name : Up to 15 characters
(3) Type of communication : GROUP indicates that the Program key is programmed as a group key. POP indicates that the Program key is programmed as a POP access key.
(4) Destination(s) : Destinations programmed into the Program Key.
(5) Deletion of received Email : Valid means that the received email will be deleted.
Invalid means that the received email will be...

Page 182

182
Printout Journals and Lists
Fax Parameter List
To Print a Fax Parameter List.1
BERLIN
ANTARTICA
2
Sample Fax Parameter List
************* -FAX PARAMETER LIST- ************** DATE MMM-dd-yyyy ***** TIME 15:00 ***** P.01
   (1)      (2)                    (3)                                  (4)         (5)   No.      DESCRIPTION            SELECTION                            CURRENT     STANDARD
                                                                        SETTING     SETTING
   000...

Page 183

183
Printout Journalsand Lists
3
The fax parameter list will be printed.
Explanation of Contents
(1) Parameter number
(2) Description : (HOME) means home position setting.
(3) Selection
(4) Current setting : ---- indicates code or password is not set. When the code or password \
is set, it is represented
by asterisk (*).
(5) Standard setting : Factory preset standard setting
(6) Changed setting : * indicates that the Factory preset setting was changed.
Downloaded From ManualsPrinter.com Manuals 

Page 184

184
Problem Solving
During ReceptionRemove the misfeed paper.
(See the Operating Instructions (For Basic Operations))
Recording paper
doesnt advance into
machine Make sure that there is paper in the Paper Tray. Follow the
instructions for loading paper.
---
Recording paper
doesnt eject after
printing Check to see if the recording paper is jammed inside of the
machine.
---
Document auto
reduction doesnt
work Check Fax parameter No. 024 (
Print Reduction) setting. 27
169
T
ransmission Copy
Quality V...

Page 185

185
Problem Solving
186-
189 No dial tone 1. Check the connection of the telephone line.
2. Check the telephone line.9
191
No Unit OperationNo unit operation To reset the machine, turn-off the Power Switch for a few seconds
then turn it on again.9 No auto answer 1. Check the connection of the telephone line.
2. Check the Reception mode setting.
3. If the Fax Parameter No. 013 (Auto Journal Print) is set to
Valid (default setting) and the machine is printing the received
document(s) from memory, which...

Page 186

186
Problem Solving
407 No confirmation from the receiving station for theprevious page sent. W
ait a few minutes and send again. ---
400 During initial handshake, receiving station did not
respond or communication error occurred. 1. Check with the other party.
2. Reload the document and send again.---
061 ADF Door (Document Return Guide) is open. Close the ADF Door. ---
031 Document is too long or jammed.
Document length exceeds 78.8 inches (2 meters) in
Normal  and Fine mode only. The length...

Page 187

187
Problem Solving
416/417/418/419 Received data has too many errors. Check with the other party. ---
Info. Code Meaning Possible Action Page
420/421 Machine goes to receiving mode, but receives no
command from the transmitting side. 1. Remote side misdial.
2. Check with the other party.---
422/427 Interface is incompatible. Check with the other party. ---
430/434 Communication error occurred while receiving. Check with the other party. ---
436/490 Received data has too many errors. Check with the other...

Page 188

188
Problem Solving
634 Redial was not successful due to no response fromthe called station or wrong number dialled.
Note:If busy tone was not detected, the machine will
only redial once. Check the telephone number and send again. ---
Info. Code Meaning Possible Action Page
Information Code
638 Power failure occurred during the communication. Check the power cord and plug. ---
711 Incorrect LDAP settings. Check the LDAP Server Name, LDAP Log in
Name, LDAP password, LDAP Search Base.54
712 Incorrect email...

Page 189

189
Problem Solving
870 Memory overflow occurred while storing documentsinto memory for transmission. T
ransmit documents without storing into
memory. 18
725 DNS Server connection timed out. DNS Server is
down. Check the DNS Server IP Address.
Contact the Network Administrator.---
726 Received an error response from the DNS Server. Check the POP Server Name. Check the SMTP Server Name.---
728 The document was sent to the Internet Fax in an incompatible file format (PDF).
Note:PDF file format is only used...

Page 190

190
Problem Solving
Receive a fax. You cannot receive a fax.
Send a fax. You cannot send a fax.
Receive phone calls. Possible with the external telephone connection.
Make phone calls. Possible with the external telephone connection.
Problem ConditionData preprogrammed or
preset on your machine. You are receiving a fax.
Memory content.
NOTE1. If a power failure occurs while scanning a document, the scan is cancele\
d. Rescan the document when
power recovers. If a power failure occurs while sending a...
Start reading Panasonic DP 8035 User Manual

Related Manuals for Panasonic DP 8035 User Manual

All Panasonic manuals