Panasonic DP 180 User Manual
Have a look at the manual Panasonic DP 180 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Installing the PS Driver Security Utility 51 Printer Section In order to utilize Department Codes, Mailboxes or Secure Mailboxes, the appropriate information must be input prior to installing the printer driver. If you are using Mac OS X, use the PS Driver Security Utility to change the setting before adding the printer. If you have already added the printer, delete it, change the setting using the PS Driver Security Utility, then add the printer. Mac OS 1Exit from all applications, then insert the Panasonic Prin ting S ystem CD in to the CD-ROM drive. Double-click the CD icon on the desktop. For OS 8.6/9.x: B ro wse to fol der E nglish > PS > Setup > Mac > Tool For OS X : Browse to folde r Eng lish > PS > Setup > Mac > Tool > OSX_only Co py PsSecure.sit to your hard disk. Note: If PsSecure.sit does not automatically decompress, install a suitable decompression utility. 2Please decompress PsSecure.sit with decompression tool. Double-click the PS Driver Sec urity U tility icon to start. Note: Installation instructions A .hqx .sit .sea file on a Macintosh, use StuffIt Deluxe or StuffIt Expander by Aladdin Systems (http://www.aladdinsys.com/) to access the files contents. StuffIt Expander is available as a freeware product. Downloaded From ManualsPrinter.com Manuals
52 Configuring the Printer Driver Settings To change the printer settings, open the printer properties by performing the following steps. Windows 98/Windows Me 1 Click the Start button, select Settings, and then click Printers. 2 Right-click the desired printer icon in the Printers fol der, and select Properties in the popup menu. The printe r properties dialog box appears. Downloaded From ManualsPrinter.com Manuals
Configuring the Printer Driver Settings 53 Windows 98/Windows Me Printer Section General Tab 1.Comment Enter comments regarding the properties, if any. If another user sets up this printer on his or her computer when sharing the printer, the comment specified here will also appear on that computer. However, the comment displayed for an existing user will remain unchanged even if the comment is modified later. 2.Separator page This featu re is not availab le on these machines. 3. button Prints a te st pa ge. This allows the user to verify if the printe r is installed properly. Print Test Page Downloaded From ManualsPrinter.com Manuals
Configuring the Printer Driver Settings 54 Windows 98/Windows Me Details Tab 1.Print to the following port Displays either the port where the printer is connected or the path to the network printer. To change the printing destination, either select the printing destination port from the list or enter the network path here. 2. / button Adds/deletes new port or new network path. 3.Print usin g the followin g d river Displays the type of the printer driver. Specify the printer being used or a printer model which can be emulated with the printer being used. 4. button Updates or modifies the printer driver. 5. / button Assigns a local port to the network connected printer or cancels a local port assigned to the network printer. 6.Timeout s ettings - Not sele cted (For LPT Port only) Specify the amount of time (in seconds) allowed to elapse before the printer comes online. If the printer is not online within this duration, an error message will be displayed. Add Port...Delete Port... New Driver... Capture Printer Port...End Capture... Downloaded From ManualsPrinter.com Manuals
Configuring the Printer Driver Settings 55 Windows 98/Windows Me Printer Section 7.Timeout settings - Transmission retry (For LPT Port only) Specify the amount of time (in seconds) allowed to elapse before the printer is ready for printing. If the printer is not ready for printing within this duration, an error message will be displayed. Increase this value if a timeout error occurs when printing a large document. 8. button Specify the method of sending (spool) documents from the program to the printer. 9. button Modifies printer port settings. Spool Settings... Port Settings... Downloaded From ManualsPrinter.com Manuals
Configuring the Printer Driver Settings 56 Windows 98/Windows Me Sharing Tab 1.Not Shared/Shared As Select whether to display or share this printer with other computers. 2.Share Name Specify the name of the shared printer. The displayed name can be used as it is or a new name may be entered. The name specified here will be displayed when other users view information about the printer on the network. 3.Comment You can enter comments regarding a shared printer (such as the type of printer and the location where it is installed). When other users view information about the printer on the network, the comment specified here will be displayed. 4.Password Specify a password required when other users will connect to this printer. Leave the box blank in order not to use any password. NOTE1.Sharing Tab in property dialog box is not displayed unless printer sharing has been specified. Downloaded From ManualsPrinter.com Manuals
Configuring the Printer Driver Settings 57 Windows 98/Windows Me Printer Section Paper Tab 1.Pape r size Select a document size. 2.Orientatio n Select the print orientation (Portrait/Landscape). 3.Pape r control Controls printer outputs and groups pages. Select Collate if you wish each set of multiple copies collated when you print them. Otherwise, each page is printed in individual groups. The Dup lex menu specifies whether and how the printer should print the document on both sides of the paper. 4.Pape r source Specify where the paper you want to use is located in the device. If you choose Auto Select Tray, the printer driver will automatically select an appropriate tray according to the Paper Size selected. Note:1. If no pa per size match is found, the printe r drive will sele ct the Tray 1. (DP-180 /190) 2. If no paper size match is found, the printer drive will select the Bypass Tray. (DP-1520P/ 1820P/1820E) 5.Pape r type Specifies the type of paper medium to use, such as plain or thick. Note:If selecting other than Plain Paper for the Paper type, the printer driver will select the Bypass Tr a y if Auto Select Tray was selected as the Paper source. 6. button Displays the Margins dialog box. Click this button to view the area of the page that is unavailable for printing. Margins... Continued on the next page... Downloaded From ManualsPrinter.com Manuals
Configuring the Printer Driver Settings 58 Windows 98/Windows Me 7. button Displays version and copyright information for this printer driver. 8. button Displays the help window for this printer driver. 9. button Sets the values of all options in the current dialog box to the default values specified in the PPD file.About... Help Restore Defaults Downloaded From ManualsPrinter.com Manuals
Configuring the Printer Driver Settings 59 Windows 98/Windows Me Printer Section Graphics Tab 1.Resolution Select the resolution you want for printing (300/600/1200dpi Enhanced). 2.Spec ial Prints a negative image and/or mirror image of your document. Click these options to view an example. 3.Pape r handling Specify the layout pattern for printing multiple documents on a single sheet of paper and whether page borders are used. Select these options to view an example. 4.Scaling (25-400%) Specify an enlargement or reduction percentage when printing documents. If enlargement/reduction can be set within the application, indicate 100% here and specify the enlargement/reduction percentage in the Print dialog box of the application. 5.Convert gray tex t/graphics to PostScript gray This featu re is not availab le on these machines. 6. button Displays the help window for this printer driver. 7. button Sets the values of all options in the current dialog box to the default values specified in the PPD file. Help Restore Defaults Downloaded From ManualsPrinter.com Manuals
Configuring the Printer Driver Settings 60 Windows 98/Windows Me Fonts Tab 1.Substitute printer fonts for TrueType fonts when applicable Tells the driver to determine which PostScript fonts to substitute for TrueType fonts. Instead of sending all TrueType fonts to your printer, this option substitutes a PostScript printer font for the common TrueType fonts used in your do cumen t. By default, common TrueType fonts are substituted with their PostScript look-alikes when printing, but those with no PostScript look-alike font are sent to the printer in the format specified in the Send TrueType Fonts As box of th e Send Fonts As dialog box. 2.Do not use printer fonts Disables using printer-resident fonts. Use this advanced option when you expect to send the PostScript output to different printer models. 3.Add Euro Currency Symbol to PostScript Fonts Adds the European currency symbol to most PostScript fonts. 4. button Updates the list of PostScript fonts that have been downloaded to the printer so that the driver prints them correctly. 5. button Displays the Send Fon ts As dialo g box. Click this butto n to sp ecify how to send TrueType or Po stScrip t fonts. 6. button Displays the help window for this printer driver. 7. button Sets the values of all options in the current dialog box to the default values specified in the PPD file. Update Soft Fonts Send Fonts As... Help Restore Defaults Downloaded From ManualsPrinter.com Manuals