Panasonic DP 180 User Manual

							Installing the Printer Driver
31
Connecting with a USB Cable (Mac 8.6/9x)
Printer Section
3Activate the Desktop Printer Utility on the 
Ado be PS Compo nents within your Macintosh.
Note:
If the Desktop Printer Utility is not on the 
Adobe PS Components, follow the steps 
1 to 7 on page 
11 and 12.
4Select AdobePS from With menu and select the 
Prin ter (U SB ) on the Create Desktop... menu.
Click the   button.
5Click the   button on the US B 
Prin ter Selection.
Continued on the next page...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the Printer Driver
32
Connecting with a USB Cable (Mac 8.6/9x)
6Select your machine and click the   
button.
7Click the   button on the PostScript 
Printer Description (PPD) File.
8A status bar indicates that the printer driver is 
being installed.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the Printer Driver
33
Connecting with a USB Cable (Mac 8.6/9x)
Printer Section
NOTE1. Click the Set_Default Printer in the Printing menu when your machine is set to the default 
printer.
9Click the   button.
10Click the   button.
11Click the   button.
12A status bar indicates that the printer driver is 
being installed.
13The driver creates a new desktop printer icon for 
your device.
US B-MA C8.6/9X  E ND
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the Printer Driver
34
Connecting with a USB Cable (Mac OS X)
1Connect the printer to the PC with an USB 
ca ble. Turn the Power Switch of yo ur machine 
ON.
2Open the Printer Center and click the Add  
Printer…from the Prin ters menu.
(Rear View)
DP-180/190
(Right Side View)
DP-1520P/1820P/1820E
(Left Side View)
DP-2330/3030
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the Printer Driver
35
Connecting with a USB Cable (Mac OS X)
Printer Section
NOTE1. Open the Printer Center and click your machine, then select Make Default from the Printers 
menu when your machine is set to the default printer.
31 . Se lect USB.
2. Select your printer.
3. Select A uto S elec t or Pa nasonic_DP-
xxxx x.ppd from the Prin ter Mo del menu.
4. Click the   button.
4Your machine is shown on the Printer List.
Close the Prin ter Cen ter.
US B-MA C OSX  E ND
Downloaded From ManualsPrinter.com Manuals 
						

							36
Installing the LPR (Line Printer Remote) Monitor
Windows 98/Windows Me
1Insert the Panasonic Printing System CD-ROM.
2Click on the desired language.
Note:
1. If the CD-ROM does not launch 
automatically, double click the My Computer 
icon on the Desktop or on the Start menu, 
then double click the CD-ROM icon. 
2. The language screen differ depending on the 
models.
3Click  the   button.
4Click Printer Driver (Post Script3).
5Click Install LPR Monitor.
Next
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
37
Windows 98/Windows Me
Printer Section
6Th e M-LPR Port Monitor Setup dialog box appears.
Click the   button.
7Th e required  files are copied .
8Th e setup pro gram copies the ne cessary file s onto
the hard disk of your PC.
When the setup process is completed, a screen
is displayed prompting you to restart your
computer.
It is recommended that you restart your computer
now so that the LPR Monitor can be started.
Click the   button.
9If you have not installed the printer driver yet, please 
proceed to Installing the Printer Driver on page 6.
After your computer has rebooted, click the Start 
button, select Settings, and then click Printers.
Th e Printers folder appears.
Right-click on the desired printer icon and select 
Properties from the pop-up menu.
OK
Finish
Continued on the next page...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
38
Windows 98/Windows Me
10The printer properties dialog b ox app ears.
The following step registers the LPR Port fo r network 
printing.
Before proceeding, ensure that the printer is 
installed, connected to the network, turned ON and is 
operating properly.
11Select the Details tab and click the   
button.Add Port...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
39
Windows 98/Windows Me
Printer Section
NOTE1. To print data via LAN, the LPR Monitor must be installed on your PC.
12Th e Add Port dialog box appears. Click the Other 
radio button, select M-LPR Port Monitor from the 
Click the type of port you want to add: list, and click 
the  button.
13Th e M-LPR Port Monitor dialog box appears.
Type the IP Address of the machine in the Ho st 
na me or IP addres s: text box and the queue name 
(e.g. New105) in the Queue name: text box.
Click the   button. If an error occurs 
because the queue name has already been used for 
the same IP Address, select a different unique name 
such as New106.
14Th e screen re verts to the Printer Properties.
Check that the Print to the following port: has been 
changed as entered in step 13, and click on the 
 button first and then the   
button.
Th e prin ter p rope rties dia log box closes and you 
have now configured the printer as a network printer.
LPR 98/ME END
OK
OK
ApplyOK
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
40
Logon using an account with administrator rights.
Windows NT 4.0
1Click the Start button, select Settings, and click 
Con trol P anel.
The Con trol P anel window appears.
Double-click on the Network applet.
The Netwo rk dialog box appears.
2Click on the Services tab.
Verify whether the LPR Service is already installed.
(Indicated by Microsoft TCP/IP Printing shown in 
the  N etw ork Service s l ist.)
If it is already installed, skip to Step 7. Otherwise 
continue installing the LPR Service.
Downloaded From ManualsPrinter.com Manuals