Panasonic DP 180 User Manual

							Installing the LPR (Line Printer Remote) Monitor
41
Windows NT 4.0
Printer Section
3Cl ick th e   button to  di splay th e Select 
Ne twork S ervice dialog box, and select Microsoft 
TCP/IP Printing.
Click the   button.
4The Windows  NT Setup dialog box appears.
Insert the Windows NT 4.0 CD-ROM, and type 
D:\i386 (where D: is your CD-ROM drive).
Click the   button.
5After the files have been copied into the Hard Drive 
of your PC, the display returns to the Network dialog 
box. Confirm th at the  Microsoft TCP/IP Printing 
service has been added to the Network Services list.
Click the   button.
Note:
If the OK button does not change into a 
Close button, Remove and reinstall the 
Microsoft TCP/IP Printing service.
6The Ne twork Settings Cha nge dialog box is 
displayed, click the   button to restart 
your computer now.
You have now completed the LPR Service 
installation.
Add...
OK
Continue
Close
Yes
Continued on the next page...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
42
Windows NT 4.0
7After your computer has rebooted, log on with an 
account with Administrator Priviledges, click the Start 
button, select Settings, and then click Printe rs.
The Prin ters folder appears.
Right-click on the desired printer icon and select 
Properties from the pop-up menu.
8The following ste p reg isters the LPR Port for network 
printing.
Before proceeding, ensure that the printer is 
installed, connected to the network, turned ON and is 
operating properly.
Select th e Ports Tab and click the    
button.
9The Prin ter Ports dialog box appears.
Select LPR Port and click the   
button.
Add Port...
New Port ...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
43
Windows NT 4.0
Printer Section
10The Add LPR compatible printer dialog box 
appears.
Enter the IP Address of the printer in the upper text 
field, and lp for the print queue name in the lower 
text field.
Click the   button.
(Please wait while the wizard verifies the IP Address 
and connectivity to the network.
11The Printer Po rts dialog box appears.
Click the   button.
12Select the printer port and click the   
button.
The printer properties dialog box closes and yo u 
have now configured the printer as a network printer.
LPR NT4.0 END
OK
Close
OK
Continued on the next page...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
44
Logon using an account with administrator rights.
Windows 2000/Windows XP/Windows Server 2003
1Open the Prin ters (Windows XP/Windows Sever 
2003: Printers and Faxes) folder.
.
Right-click on the desired printer icon and select 
Prop erties from the pop-up menu.
The printer properties dialog box ap pears.
2Select the Po rts Tab and click the    
button.
3Select Standard TCP/IP Port and click the 
 button.
Add Port...
New Port...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
45
Windows 2000/Windows XP/Windows Server 2003
Printer Section
4Click  the   button.
5Enter the IP Address and the Port Name and click 
the  button.
Note:
The Port Name is automatically entered 
together with the IP Address. You may need 
to change it as required.
6
Select Custom and click the   button.
or

Select Standard and click the   button. 
Then, go to step 9.
Next
Next
Settings...
Next
Continued on the next page...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
46
Windows 2000/Windows XP/Windows Server 2003
71. In the Protocol section, select LPR.
2. In the LPR Settings section, enter the Queue 
Name (e.g. LPR1) and select the LP R Byte 
Counting Enabled.
3. Click the   button.
8Click  the   button.
9Click the   button.
OK
Next
Finish
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the LPR (Line Printer Remote) Monitor
47
Windows 2000/Windows XP/Windows Server 2003
Printer Section
10Click the   button.
11Click the   button.
Click the   button.
The printer properties dialog box closes and you 
have now configured the printer as a network printer.
LPR 2000/XP/2003 END
Close
Apply
OK
Downloaded From ManualsPrinter.com Manuals 
						

							48
Installing the PS Driver Security Utility
If you wish to use the Mailbox and Secure Mailbox functions, it is essential that you setup the Utility settings 
fi rst.
To control the Charge Management with the Accounting Management application, it is essential that you 
setup the Utility settings first.
Windows
1Exit from all applications, then insert the Panasonic 
Printing System CD into the CD-ROM drive.
2Select the desired language.
Note:
1. If the CD-ROM does not launch 
automatically, double  click the My Computer 
icon on the Desktop or on the St a r t menu, 
then double click the CD-ROM icon. 
2. The language screen differ depending on the 
models.
3The setu p message will display.
Click the   button.
4Click Printer Driver (PostScript3).
Next
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the PS Driver Security Utility
49
Windows
Printer Section
5Select Install PS Driver Security Utility.
6Click the   button.
7Click the   button if you want to place a 
shortcut to PS Security Utility on your desktop.
8The required files are co pied.
Next
Yes
Continued on the next page...
Downloaded From ManualsPrinter.com Manuals 
						

							Installing the PS Driver Security Utility
50
Windows
The PS Driver Security Utility folder has b een a dded to the  Program menu, a nd the insta lla tion ha s now 
completed.
9Click the   button.Finish
Downloaded From ManualsPrinter.com Manuals