Panasonic Dmp Bd70v Operating Instructions

							RQT9412
31
Settings
MenusItemsSettings and details
PlayRepeat Play(Only when the elapsed time is being displayed on the unit’s display.)Selects the item which you want to repeat. The items displayed differ depending on the type of media.
≥All tracks All tracks
≥ Chapter Chapter
≥ Playlists Playlist
≥ Title Title
≥ One track Track
≥ Off
Select “Off” to cancel.
Random [CD] [MP3]
While playing, press [3,4] to select “On”.
Random playback starts from the next track.
≥ On ≥Off
VideoPicture [BD-V] [AVCHD] [DVD-VR] [DVD-V] [MPEG2]
Select the picture quality mode during play.
≥Normal: Default setting
≥ Soft:  Soft picture with smoother video
≥ Fine:  Details are sharper
≥ Cinema: Mellows movies, enhances detail in dark scenes.
≥ User:  You can make further adjustments. ( >below)
1 Press [ 1] to select “Picture Adjustment” and press [OK].
2 Select the item using [ 3,4] and adjust it with [ 2,1].
Contrast:Increases the contrast between light and dark parts of the picture (j7 to i7).Brightness :Brightens the picture (0 to  i15).
Sharpness :Adjusts the sharpness of the edges of the horizontal lines ( j6 to i6).
Color : Adjusts the saturation of the picture’s color ( j7 to i7).
Gamma : Adjusts the brightness of dark portions of the screen (0 to  i5).
3D NR: Reduces the rough noise in the background to give a greater feeling of 
depth (0 to i4).
When “24p Output” is set to “On”, this function may not operate. ( >34)
Integrated NR :Smooths block noise and reduces the smudging that appears around 
contrasting sections of the picture (0 to  i3).
Progressive Select the method of conversion for progressive output to suit the type of material being played 
(>50, Film and video).
≥ Auto : Automatically detects the film and video content, and appropriately converts it.
≥ Video: Select when using “Auto”, and the content is distorted.
24p  [DVD-V] ≥On ≥Off
Only when you have selected “On” in “24p Output” ( >34)
AudioSound Effects *1, 2≥Off
Re-master ( >21)
≥ Re-master 1 ≥Re-master 2 ≥Re-master 3
V. Surround
[BD-V] [AVCHD] [DVD-VR] [DVD-V] [MPEG2]  (2 channels or more only)
Enjoy a surround-like effect if you  are using two front speakers only.
– Turn V. Surround off if it causes distortion.
– Do not use in combination with surround effects on other equipment.
– V. Surround does not work for bilingual recordings.
≥ V. Surround 1 ≥V. Surround 2
Night Surround
To enjoy a movie with powerful sound even when the volume is kept low at night, the audio is set 
in such a way that it can be heard easily.
≥ Night Surround
Dialog Enhancer *
1[BD-V] [AVCHD] [DVD-VR] [DVD-V] [MPEG2]  (3 channels or more only, including a center channel)
The volume of the center channel is raised to make dialog easier to hear.
≥ On ≥Off
*1 This function is effective for audio from the HDMI terminal or the DIGITAL AUDIO OUT terminal only when “Dolby D/Dolby D +/Do lby TrueHD” 
or “DTS/DTS-HD” is set to “PCM”. (However, in this case,  audio is output as 2ch from the DIGITAL AUDIO OUT terminal.)
*2 Not every function can be set individually.
Settings
DMP-BD70V-RQT9412_ENG.book  31 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
32
Changing the unit’s settings
Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby.
Setup menu operations
Summary of settings
Underlined items are the factory presets.
1While stopped
Press [SETUP].
2 Press [ 3,4] to select the menu 
and press [OK].
3 Press [ 3,4] to select the item 
and press [OK].
If there are any other items, repeat these steps.
4 Press [ 3,4, 2,1] to select the 
option and press [OK].
≥ There may be differences in operation 
methods. If this happens, follow the 
on-screen instructions for the 
operation.
To return to the previous 
screen
Press [RETURN].
To exit the screenPress [SETUP].RETURN
SetupDiscVideoAudioDisplayTV / Device ConnectionNetworkOthers
OK
“Disc”
DVD-Video RatingsSet a ratings level to 
limit DVD-Video play. Follow the on-screen instructions. Enter a 
4-digit password with the numbered buttons 
when the password screen is shown. It will be 
the common password for “DVD-Video 
Ratings”, “BD-Video Ratings” and “Network 
Lock“.
≥
Do not forget your password. ≥
8 No Limit: All DVD-Video can be played.
≥ 1 to 7: Prohibits play of DVD-Video with corresponding 
ratings recorded on them.
≥ 0 Lock All: Prohibits play of all DVD-Video.
Changing settings (When level 0 to 7 is selected) ≥Unlock Player ≥Change Password
≥ Change Level ≥Temporary Unlock
BD-Video RatingsSet an age limit of 
BD-Video play. ≥
No Limit: All BD-Video can be played.
≥ 0 to 254 year(s): Prohibits play of BD-Video with corresponding 
ratings recorded on them.
Changing settings (When 0 to 254 year(s) is selected) ≥Unlock Player ≥Change Password
≥ Change Level ≥Temporary Unlock
Audio 
LanguageChoose the language for audio, subtitle and 
disc menus.
[BD-V] [DVD-V]
≥Some discs start in a certain language despite 
any changes you make here.
≥ When the selected language is not available 
on the disc, the default language is played. 
There are discs where you can only switch the 
language from the menu screen. ( D20)
≥ Enter a code ( >36) with the numbered 
buttons when you select “Other  ¢¢¢¢”. ≥
English≥French ≥Spani sh
≥ Original: The original language of each disc will be selected.
≥ Other  ¢¢¢¢
Subtitle 
Language≥Automatic:
If the language selected for “Audio Language” is not available, 
subtitles of that language will automatically appear if available on that 
disc.
≥ English ≥French ≥Spani sh ≥Other  ¢¢¢¢
Menu Language≥English≥French ≥Spani sh ≥Other  ¢¢¢¢
BD-Live Internet Access [BD-V] (> 23)You can restrict Internet access when BD-Live functions are used. ≥Allow (ALL): Internet access is permitted for all BD-Live contents.
≥Allow (Limited): Internet access is permitted only for BD-Live 
contents which have content owner certificates.
Internet access is prohibited for all BD-Live 
contents without a certificate.
≥Prohibit: Internet access is prohibited for all BD-Live contents.
“Video”
Still Mode (paused video) [BD-V] [AVCHD] [DVD-V]
Select the type of picture shown when you pause playback 
(> 50, Frames and fields). ≥
Auto≥Field: Select if jittering occurs when “Auto” is selected. (The picture 
is coarser.)
≥ Frame: Select if small text or fine patterns cannot be seen clearly 
when “Auto” is selected. (The picture is clearer and finer.)
Seamless Play [DVD-VR]
Select the play mode between playlist chapter segments and partially 
deleted titles. ≥
On: The chapters in playlists are played seamlessly. This does 
not work while searching or when there are several audio 
types included on the playlist. Additionally, the positioning of 
chapter segments may change slightly.
≥ Off: The points where chapters  in playlists change are played 
accurately, but the picture may freeze for a moment.
Black Level ControlSelect lighter or darker for adjusting the black level control to the 
desired setting for picture enhancement. ≥
Lighter
: When video is output from VIDEO OUT terminal.
≥ Darker: When video is output from COMPONENT VIDEO OUT 
terminal.
DMP-BD70V-RQT9412_ENG.book  32 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
33
To select these options, perform steps 1–4 ( >32)
“Audio”
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range ( >50) for late night viewing. ≥
On ≥Off≥ Auto: Effective only when Dolby TrueHD is played.
Digital Audio Output ( >8)≥Press [OK] to show the following settings.
Dolby D/Dolby D +/
Dolby TrueHDSelect whether Dolby Digital, Dolby 
Digital Plus, Dolby TrueHD, DTS Digital 
Surround, DTS-HD High Resolution 
Audio or DTS-HD Master Audio is output 
in “Bitstream” or “PCM” format.
≥Not making the proper settings may 
result in noise.
≥ If the unit is connected with the 
HDMI AV OUT terminal, the 
specifications of the connected 
equipment take preference over this 
unit and audio selected in these 
items may not be output (e.g., when 
a television is connected, the HDMI 
audio output of this unit is limited to 
down-mixed 2ch.) ≥
Bitstream
:
Select “Bitstream” when the connected equipment can decode the 
respective audio format. 
– Connect equipment supporting HDMI (High Bit rate Audio) and use a  High Speed HDMI Cable in order to output high bit rate audio such as 
Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or 
DTS-HD Master Audio.
≥ PCM:
Select “PCM” when the connected equipment cannot decode the 
respective audio format. 
Refer to the operating instructions for connected devices to verify whether or 
not they can decode each of the audio formats.
DTS/DTS-HD
BD-Video Secondary Audio 
[BD-V]
Turn on/off the button click sound on the menu and audio with 
secondary video in picture-in-picture mode. ( >23) ≥
On: The primary audio and secondary audio are mixed and output. The 
sampling frequency is converted to 48 kHz.
≥ Off: The  button click sound  on the menu and secondary audio are not 
output.
PCM Down ConversionSelect how to output audio with a sampling frequency of 96 kHz.
≥ Signals are converted to 48 kHz despite the settings across in 
the following cases:
– when the signals have a sampling frequency of 192 kHz
– when the disc has copy protection
– when “BD-Video Secondary Audio” is set to “On” ≥
On: Signals are converted to 48 kHz. (Choose when the connected 
equipment cannot process signals with sampling frequency of 
96 kHz.)
≥ Off
: Signals are output as 96 kHz. (Choose when the connected 
equipment can process signals with sampling frequency of 
96 kHz.) 
DownmixSwitch the downmix system for playing back multi-channel 
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is 
set to “Bitstream”, there are no downmix effects for the outputted 
audio.
≥ The audio will be outputted in “Stereo” in the following cases:
– AVCHD playback
– Playback of button click sound on the menu and audio with 
secondary video in picture-in-picture mode ≥
Ster eo
: When connected to equipment (e.g., TV) that does 
not support the virtual surround function.
≥ Surround encoded: When connected to equipment that supports the 
conversion from 2 channels to multi channel 
surround.
“Display”
Status MessagesChoose whether to show status messages automatically. ≥
Automatic
≥Off
On-screen LanguageChoose the language for these menus and on-screen messages. ≥
English≥Français ≥Español
Screen Saver FunctionThis is to prevent burn-in on the screen.
≥ Regardless of the setting, the screen switches to Screen Saver 
mode if there is no operation for 2 minutes after starting the 
playback of CD or MP3. (Playback continues.). ≥
On: (Screen Saver Function is enabled after 10 minutes of no activity)
– When the movie title being played was created in 4:3 display mode the 
masked-off area on the screen becomes gray to prevent screen burning. 
(The screen saver will not be activated if the movie was created in 16:9 
display mode.)
[When connecting with an HDMI cable, “TV Aspect” ( >34) is set to “16:9” 
and “HDMI Resolution” ( >34) is set to any mode other than “480p”, or 
when connecting with a component video cable, “TV Aspect” ( >34) is set 
to “16:9” and “Component Video Resolution” ( >34) is set to “720p” or 
“1080i”.]
– When the Direct Navigator or FUNCTIONS menu is displayed, the  display returns to the screen saver mode.
– When still pictures are shown (except for slideshow), the display returns  to the Direct Navigator screen.
≥ Off
FL DisplayChanges the brightness of the unit’s display. ≥
Bright≥Dim: The display is dimmed.
≥ Auto: The display is dimmed dur ing playback and is bright 
except during playback.
SD Card LED ControlSet the lighting method for the lamp on the SD card slot. ≥
On≥Off
≥ SD inserted: When this unit is turned on and SD card is inserted, the 
lamp is lighted.
License Information about the software used by this unit is displayed. 
Settings
DMP-BD70V-RQT9412_ENG.book  33 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
34
Changing the unit’s settings
To select these options, perform steps 1–4 (> 32)Underlined items are the factory presets.
* In this unit, a P4HD ( >51) video processor is used to provide video  of optimal resolution to the connected TV.
“TV / Device Connection”
TV AspectSet to match the type of television connected. When connected to a 4:3 aspect television:
≥
4:3 Pan & Scan: Video recorded for a widescreen is played as Pan & Scan 
(unless prohibited by the produc er of the disc). When playing 
BD-Video, video is output as “4:3 Letterbox”.
≥ 4:3 Letterbox:  Video recorded for a wide screen is played in the letterbox 
style.
When connected to a 16:9 widescreen television:
≥ 16:9
:  Video recorded for 4:3 aspect screen is displayed as a 4:3 ratio 
image in the center of the screen.
≥ 16:9 Full:  Video recorded for 4:3 aspect screen is displayed as a 
horizontally stretched 16:9 image.
HDMI Connection≥Press [OK] to show the following settings.
HDMI Video ModeSelect “On” when video is output from HDMI AV OUT 
terminal. ≥
On: Images are output from the HDMI terminal in the resolution set in “HDMI 
Resolution”. Video from COMPONENT VIDEO OUT terminal is output as 
“480i”.
≥ Off Images are output in the resolution set in “Component Video Resolution”.
HDMI Resolution*The items supported by th e connected devices are 
indicated on the screen as “ ¢”. When any item without 
“ ¢” is selected, the images may be distorted. ≥
Auto: Automatically selects the output resolution best suited to the 
connected television (1080p, 1080i, 720p or 480p).
≥ 480p ≥720p
≥ 1080i ≥1080p
– When outputting 1080p signal, we recommend using High Speed HDMI Cables  that have the HDMI logo (as shown on the cover) and are less than 5.0 meters to 
prevent video distortion etc.
– When the unit is connected to an amplifie r/receiver that does not support the 
resolution set on the unit, the video cannot be output properly. In this case, use 
the HDMI cable to connect the unit to the TV and then connect the unit to the 
amplifier/receiver using a cable other than HDMI.
– To enjoy high definition video up-converted to 1080p, you need to connect the 
unit directly to 1080p compatible HDTV (High Definition Television). If this unit is 
connected to an HDTV through other equipment, it must also be 1080p 
compatible.
24p Output [BD-V] [DVD-V]
When this unit is connected to a TV supporting 1080/24p 
output via an HDMI cable, this unit displays each frame at 
1/24 second intervals – the same interval originally shot 
with the film camera.
≥ When playing DVD-Video, set to “On” and then set “24p” 
in “Video” ( >31) to “On” ≥
On: Images in 24p are output in 24p as they are. 
However, 
–when video is being output at 24 frames, images from any other terminal 
than the HDMI terminal may not be output properly.
– [BD-V] : when images other than 24p are played, images are output at 
60p.
≥ Off
HDMI RGB Output RangeEffective when connected to a device that only supports 
RGB output.  ≥
Standard: The video is output as it is.
≥ Enhanced:  When the black and white contrast of a video is low, the signal 
is enhanced to reproduce clear video.
HDMI Audio OutputThis setting selects whether or not to output audio from 
HDMI. ≥
On:
≥ Off: When the TV is connected to this unit using an HDMI cable, and this unit 
is also connected to other devices, such  as an amplifier/receiver using an 
optical digital audio cable.
VIERA LinkSet to use “HDAVI Control”  function when connected with 
an HDMI cable to a device that supports “HDAVI Control”. ≥
On:
≥ Off: Select when you do not want to use “HDAVI Control”.
Component Video Resolution*This sets the video output resolution when using the 
component video terminal.  ≥
480i≥480p ≥720p ≥1080i
Even if you select “720p” or “1080i”, the video output resolution is restricted to 
“480p” when images of DVD-Video discs or VHS are output from the 
COMPONENT VIDEO OUT terminals.
DMP-BD70V-RQT9412_ENG.book  34 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
35
To select these options, perform steps 1–4 ( >32)
“Network”
IP Address/DNS Settings ( >17)
≥Press [OK] to show the following settings.
Connection Test— — — —
IP Address Auto Configuration (DHCP) ≥On≥Off
IP Address — — —. — — —. — — —. — — —
Subnet Mask — — —. — — —. — — —. — — —
Default Gateway — — —. — — —. — — —. — — —
DNS Auto Configuration (DHCP) ≥ On≥Off
Primary DNS — — —. — — —. — — —. — — —
Secondary DNS — — —. — — —. — — —. — — —
Auto Detect Connection Speed ≥ On≥Off
Connection Speed Setting
This is enabled only when “Auto Detect Connection Speed” is 
turned “Off”. ≥
10BASE Half Duplex
≥10BASE Full Duplex
≥ 100BASE Half Duplex ≥100BASE Full Duplex
Proxy Server Settings ( >18)
≥Press [OK] to show the following settings.
Reset to factory preset≥Ye s ≥No
Proxy Address(The initial setting is blank.)
Proxy Port Number(The initial setting is “0”.)
Connection Test— — — —
Network Service ( >27) (VIERA CAST)
≥Press [OK] to show the following settings.
Network LockYou can restrict using VIERA CAST.
≥Follow the on-screen instructions. Enter a 4-digit password with 
the numbered buttons when the password screen is shown. It 
will be the common password for “DVD-Video Ratings”, 
“BD-Video Ratings” and “Network Lock“.
≥ Do not forget your password. ≥
On ≥OffChanging settings (When “On” is selected)
≥ Change Password
Audio Auto Gain ControlVolume that is different depending on the contents is adjusted 
automatically to the standard volume while using the VIERA 
CAST.
≥Depending on contents, this function effect will not work.
≥ Select “Off” when the audio is warped. ≥
On≥Off
Reduce to Screen SizeThe screen is displayed reduced so the displayed screen of the 
content does not get truncated. ≥
On ≥Off
Time ZoneBy selecting the time zone, it is possible to set the unit’s time to 
match your location.
≥ Some VIERA CAST contents require the time zone to be set. 
Set the time zone if necessary. ≥
GMT  s12 to  r12
(The initial setting is “ s5”.)
GMT  s5 
l EST (Eastern Standard Time), 
GMT  s6 l  CST (Central Standard Time)
GMT  s7 
l MST (Mountain Standard Time), 
GMT  s8 l  PST (Pacific Standard Time)
GMT  s9 l  AKST (Alaska Standard Time), 
GMT  s10  l HST (Hawaii Standard Time)
DSTSelect “On” when using Daylight Saving time. ≥
On ≥Off
MAC Address ( >17)
Displays the “MAC Address” of this unit.
Settings
DMP-BD70V-RQT9412_ENG.book  35 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							36
RQT9412
Changing the unit’s settings
To select these options, perform steps 1–4 (> 32)Underlined items are the factory presets.
When other Panasonic products respond to this remote control
Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic produc ts close together.
Language code listEnter the code with the numbered buttons.
“Others”
Off TimerSelect how long the unit remains on when it is not being used.≥2 Hours ≥6 Hours≥Off
Remote Control Code≥Set Code 1≥Set Code 2 ≥Set Code 3
Quick StartSpeed of startup from power off is increased.
≥ When the setting of “Stand-by power save” is enabled on 
the TV that supports HDAVI Control 4, it will take longer to 
startup this unit when the power supply of the TV is on 
standby mode even if the “Quick Start” is set to “On”. ≥
On:
≥ Off:
Internal control unit will be powered when it is set to On”, so contents of the 
following will be different from the time it is set to “Off”.
≥ Idle power consumption will increase. (about the power consumption  >44)
≥ The cooling fan may turn slowly to prevent overheating of internal parts.
Easy Setting
You can execute basic se ttings (“On-screen Language”, “TV 
Aspect”,  “Quick Start”). ≥
Ye s ≥No
Restore Default Settings
This returns all values in the Setup menu and the on-screen 
menu, except for “Remote Control Code”, “On-screen 
Language”, “IP Address/DNS Settings”, “Proxy Server 
Settings”, “Network Service”, “DVD-Video Ratings” and 
“BD-Video Ratings” to the default settings. ≥
Ye s ≥No
Firmware Update ( >16)
≥Press [OK] to show the following settings.
Automatic Update Check
When this equipment remains connected to the Internet, 
it will check for the latest firmware version when it is 
turned on and you can update it if necessary. ≥
On
≥Off
Update NowYou can update the firmware manually. ≥
Ye s ≥No
1Press [SETUP]. 
2 Press [ 3,4] to select “Others” and press [OK].
3 Press [ 3,4] to select “Remote Control 
Code” and press [OK].
4 Press [ 3,4] to select the code (1, 2, or 3) and 
press [OK].
5
To change the code on the remote control
While pressing [OK], press and hold the 
numbered button ([1], [2] or [3]) for more than 5 seconds.
6 Press [OK].
When the following indicator 
appears on the unit’s display and 
you are unable to operate the unit
The unit’s remote control code
Press and hold [OK] and the 
indicated number button at the 
same time for more than 5 seconds.
Set Code 1 
Set Code 2 
Set Code 3 
Remote Control Code 
Press []and[OK]togetherfor more than 5 seconds on 
the remote.
Abkhazian: 6566 
Afar: 6565 
Afrikaans: 6570 
Albanian:
8381
Amharic
:6577
Arabic: 658 2 
Armenian: 728 9 
Assamese: 658 3 
Aymara: 658 9 
Azerbaijani: 6590 
Bashkir: 6665 
Basque: 698 5 
Bengali; Bangla:  6678 
Bhutani: 68 90 
Bihari: 6672 
Breton: 668 2 
Bulgarian: 6671 
Burmese: 778 9 
Byelorussian: 6669 
Cambodian: 7577  Catalan: 6765 
Chinese: 9072 
Corsican: 6779 
Croatian: 728
2 
Czech: 678 3 
Danish: 68 65 
Dutch: 78 76 
English: 6978 
Esperanto: 6979 
Estonian: 69 84 
Faroese: 7079 
Fiji: 7074 
Finnish: 7073 
French: 708 2 
Frisian: 708 9 
Galician: 7176 
Georgian: 7565 
German: 68 69 
Greek: 6976 
Greenlandic: 7576 
Guarani: 7178  Gujarati: 71
85 
Hausa: 7265 
Hebrew: 738 7 
Hindi: 7273 
Hungarian: 728 5 
Icelandic: 738 3 
Indonesian: 7378 
Interlingua: 7365 
Irish: 7165 
Italian: 73 84 
Japanese: 7465 
Javanese: 748 7 
Kannada: 7578 
Kashmiri: 75 83 
Ka

zakh: 7575 
Kirghiz: 758 9 
Korean: 7579 
Kurdish: 758 5 
Laotian: 7679 
Latin: 7665 
Latvian, Lettish: 768 6 Lingala: 767
8 
Lithuanian: 768 4 
Macedonian: 7775 
Malagasy: 7771 
Malay: 77 83 
Malayalam: 7776 
Maltese: 778 4 
Maori: 7773 
Marathi: 778 2 
Moldavian: 7779 
Mongolian: 777 8 
Nauru: 78 65 
Nepali: 78 69 
Norwegian: 78 79 
Oriya: 798 2 
Pashto, Pushto: 808 3 
Persian: 7065 
Polis h: 8076 
Portuguese: 808 4 
Punjabi: 8065 
Quechua: 818 5  Rhaeto-Romance: 
8277 
Romanian: 8279 
Russian: 8285 
Samoan: 8377 
Sanskrit: 8365 
Scots Gaelic: 7168 
Serbian: 8382 
Serbo-Croatian: 8372 
Shona: 8378 
Sindhi: 836 8 
S

inghalese: 8373 
Slovak: 8375 
Slovenian: 8376 
Somali: 8379 
Spanish: 698 3 
Sundanese: 8385 
Swahili: 8387 
Swedish: 8386 
Tagalog: 8476 
Tajik: 8471  Tamil:
8465 
Ta t a r : 8484 
Telugu: 8469 
Thai: 8472 
Tibetan: 6679 
Tigrinya: 8473 
Tonga: 8479 
Tu r k i s h : 8482 
Tu r k m e n : 8475 
Tw i : 8487 
Ukrainian: 8575 
Urdu: 8582 
Uzbek: 8590 
Vietnamese: 8673 
Volapük: 8679 
Welsh: 67 89 
Wolof: 8779 
Xhosa: 8872 
Yiddish: 7473 
Yo r u b a : 8979 
Zulu: 908
5 
DMP-BD70V-RQT9412_ENG.book  36 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
37
Reference
About MP3/JPEG files
MP3
JPEG
≥English alphabet and Arabic numerals are displayed correctly. 
Other characters may not be displayed correctly.
≥ The display order on this unit may differ from how the order is 
displayed on a computer.
≥ Depending on how you create the media (writing software), files 
and folders may not play in  the order you numbered them.
≥ This unit is not compatible with packet-write format.
≥ Depending on the recording conditions, the media may not play. 
≥ Operation may take time to complete when there are many files 
and/or folders and some files may not display or be playable.
*1 ISO9660 level 1 or 2 (except for extended formats), Joliet This unit is compatible with multi-session.
This unit is not compatible with packet writing.
*2 Discs must conform to UDF 2.0.
*3 Discs must conform to UDF 2.5.
*4 Design rule for Camera File system: unified standard established  by Japan Electronics and Information Technology Industries 
Association (JEITA). 
*5 Discs must conform to UDF bridge (UDF 1.02/ISO9660).
This unit is not compatible with multi-session. 
The default session only is played.
Structure of folders that can be 
played in this unit
You can play files on this unit by structure of folders as shown 
below. However depending on the method of writing data 
(writing software), play may not be in the order you numbered 
the folders.
 Folder which can be displayed with this unit
¢¢¢ : Numbers
XXX: Letters
*1 ¢¢¢ : from 001 to 999
*2 ¢¢¢ : from 100 to 999 XXX: up to 5 figures
*3 ¢¢¢¢: from 0001 to 9999
File format MP3
Playable 
media
CD-R*1, CD-RW*1, DVD-R*1, *5, DVD-R DL*1, *5,
　
USB device
Extension Files must have the extension “.mp3” or “.MP3”.
Compression 
rate 32 kbps to 320 kbps
Sampling 
rate 44.1 kHz/48 kHz
Reference ID3 tags: version 1, 2.2, 2.3, 2.4
ID3 is a tag embedded in MP3 track to provide 
information about the track.
This unit supports the versions listed above but only 
titles and the names of artists can be displayed.
≥If there is a large amount of still picture data etc. 
within a MP3 file, play may not be possible.
File format JPEG
Playable 
media CD-R*
1, CD-RW*1, DVD-RAM*2, DVD-R*1, *5, 
DVD-R DL*1, *5, BD-RE*3, SD card, USB device
Extension Files must have the extension “.jpg” or “.JPG”.
Picture 
resolution between 34
k34 and 8192 k8192 pixels
(sub sampling is 4:2:2 or 4:2:0)
Reference JPEG conforming DCF*
4 is supported.
Thawing Time: approx. 2 sec. (7 M pixels)
≥ MOTION JPEG and Progressive JPEG is not 
supported
 Structures of still picture (JPEG) folders
in DVD-R/DVD-R DL/CD-R/CD-RW
Files inside a folder are displayed in the order they  were 
u pdated or taken.
in BD-RE/DVD-RAM
≥ Folder structure is not displayed.
in SD card/USB device
Displays JPEG files in all folders.
≥ Folder structure is not displayed.
 Structures of MP3 folders
in DVD-R/DVD-R DL/CD-R/CD-RW/USB devicePrefix the file names  with 3-digit n um bers in the order yo u w ant 
to play them.
P0000010.jpgP0000011.jpgP0000012.jpg
P0000003.jpgP0000004.jpgP0000005.jpg
P0000001.jpgP0000002.jpg
P0000006.jpgP0000007.jpgP0000008.jpgP0000009.jpg
Root
Folder A
Folder B
Folder C e.g.,
DCIM\b\b\b
JPEG
XXXX\b\b\b\b.JPG
P0000001.jpgP0000002.jpg
\b\b\bXXXXX
\b\b\bXXXXXDCIM
XXXX\b\b\b\b.JPG
*1
*2*3
*3
*2
Root
e.g.,
XXXX\b\b\b\b.JPG
P0000001.jpg
DCIM
P0000003.jpgP0000004.jpg
\b\b\bXXXXX
P0000002.jpg
*3
*2
Root
Folder A e.g.,
001 
010XXXX.mp3011XXXX.mp3012XXXX.mp3
003XXXX.mp3004XXXX.mp3005XXXX.mp3
006XXXX.mp3007XXXX.mp3008XXXX.mp3009XXXX.mp3
001XXXX.mp3002XXXX.mp3
Root
Folder A
Folder B
Folder C e.g.,
Settings
Reference
DMP-BD70V-RQT9412_ENG.book  37 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
38
Messages
The following messages or service numbers appear on the television or unit’s display when something unusual is detected during startup and use.
On the television Page
Cannot play.≥You inserted an incompatible disc (Discs recorded in PAL video, etc.). 6, 7
Cannot display on this unit.≥You tried to play a non-compatible image.
≥Confirm “SD” on the unit’s display is not blinking and re-insert the card. 7, 37
—
No disc is inserted. ≥The disc may be upside down. —
$ This operation is not 
available. ≥Some operations are unsupported by the unit. For example;
–[BD-V]: During playback, reverse slow-motion or reverse frame-by-frame is not possible.
20
$ This operation is 
prohibited by this disc. ≥Depending on the disc, you may not be able to perform search or skip when film 
previews and warning screens are being played back. 20
Cannot connect.
Please check the 
connection of the LAN 
cable.≥When a hub is used but its Link lamp does not light up, check the cable 
connection, LAN terminal connection, cable itself (a cross over cable may be 
used by mistake), etc. 16
IP address is not set.
≥The “IP Address” in “IP Address/DNS Settings” is “---. ---. ---. ---”. Set the “IP 
Address”, “Subnet Mask”, and “Default Gateway”. (Select the automatic address 
acquisition if necessary.) 17
Cannot obtain IP address 
using DHCP. 
Please check the 
connection or router 
settings. ≥If you use a hub, then check the connection between the hub and the router.
–Use the UPLINK port of the hub to connect to a router.
–Check whether or not the hub’s Link lamp lights up. If it does not light up, then check the cable connection, LAN terminal connection, cable itself (a cross over 
cable may be used by mistake), etc.
≥If the above conditions are OK, then the router may not operate in DHCP mode.  Check the router settings and operation. You may reset the router to restore it to 
normal. 16
16
This IP address is already in 
use. 
Please check the IP address 
setting. 
≥This unit’s IP address is used by another device. Check the IP addresses of this 
unit, personal computers, and routers, etc. If necessary, reconfigure them to 
avoid IP addresses from being duplicated. —
Unable to perform 
Connection Test.
Please try again.
≥Turn the unit off. Remove the power cord and reconnect it and try again. If the 
same symptom persists, then consult your dealer. —
IP address not set correctly.
Connection Test was 
unsuccessful.  No reply
from host. 
Please check the 
connection or router 
settings. ≥If you use a hub, then check the connection between the hub and the router.
–Use the UPLINK port of the hub to connect to a router.
–If the hub’s Link lamp does not light up, then check the cable connection, LAN terminal connection, cable itself (a cross over cable may have been used by 
mistake), etc.
≥Check the “IP Address”, “Subnet Mask”, and “Default Gateway” in the “IP 
Address/DNS Settings”.
≥If the MAC address information is required, then press [SETUP] to display the  “Network” menu. 16
17
17, 35
Network connection 
refused.
Please confirm Setup 
“BD-Live Internet Access.” ≥When you set “BD-Live Internet Access” to “Allow (Limited)” and play BD-Live 
contents which do not have a content owner certificate, the Internet access of the 
content is not allowed. If you allow the content to connect to Internet, set “BD-Live 
Internet Access” to “Allow (ALL)”. 32
Unable to check for latest 
firmware version.
Please try again later.
≥The firmware download server is currently unavailable. Please try again later.
—
DMP-BD70V-RQT9412_ENG.book  38 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
39
On the unit’s displayPage
F99≥The unit fails to operate properly. Press [POWER  Í/I] on the main unit to switch 
the unit to standby for 3 seconds. Now press [POWER  Í/I] on the main unit 
again to turn the unit on. —
HDMI ONLY
≥Some BD-Video discs can only be output with HDMI. —
NET≥Displays while VIERA CAST is starting up. —
No PLAY≥There is a viewing restriction on a BD-Video or DVD-Video. 32
No READ≥The media is dirty or badly scratched. The unit cannot play. —
PLEASE WAIT≥The unit is carrying out internal process. This is not a malfunction. You cannot 
operate the unit while “PLEASE WAIT” is displayed.
≥When connected to TV(VIERA) with “HDAVI Control 4”, and power supply is 
turned off by the “Auto power stand-by” function on the TV side. —
—
REMOVE
≥The USB device is drawing too much power. Remove the USB device. 19
SET 
(“    ” stands for a number.) ≥The remote control and main unit are using different codes. Change the code on 
the remote control.
Press and hold [OK] and the indicated number button at the 
same time for more than 5 seconds. 36
UNFORMAT
≥You inserted an unformatted DVD-RAM, DVD-RW, +RW, an unused +R, +R DL 
or DVD-RW (DVD-Video format). —
UNSUPPORT
≥You have inserted a media the unit cannot play.
≥You tried to operate with a non-compatible USB device. 6, 7
7
U11 ≥The video head is dirty. Perform the cleaning. —
U59≥The unit is hot.
The unit switches to standby for safety reasons. Wait for about 30 minutes until 
the message disappears.
Select a position with good ventilation when installing the unit. Do not block the 
cooling fan on the rear of the unit. —
U72
U73
≥The HDMI connection acts unusually.
–The connected equipment is not HDMI compatible.
–Please use HDMI cables that have the HDMI logo (as shown on the cover).
–The HDMI cable is damaged. —
H
  or F ≥There is something unusual. (The service number displayed after H and F 
depends on the unit’s condition.)
≥Check the unit using the troubleshooting guide. If the service number does not  disappear, do the following.
1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it.
2 Press [POWER  Í/I] to turn the power on. (The unit may be fixed.)
If the service number does not disappear despite doing the above, request 
service from the dealer. Inform the dealer of the service number when requesting 
service. —
40–43
START ≥The system is being restarted during the firmware update. Please do not turn off 
power. 16
UPD
/ ≥The firmware is being updated. 16
FINISH≥The firmware update is complete. 16
Reference
RQT9412~Body_mst.fm  39 ページ  ２００９年３月２日　月曜日　午後１時７分 
						

							RQT9412
40
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart 
do not solve the problem, refer to “Custome r Services Directory (United States and Puerto Rico)” on page 46 if you reside in th e U.S.A.and Puerto 
Rico, or refer to “Product information” on page 45 if you reside in Canada.
The following do not indicate a problem with this unit:≥ Regular disc rotating sounds.
≥ Image disturbance during search.
To reset this unit Page
Power
Operation
To restore the unit if it 
freezes due to one of the 
safety devices being 
activated≥Press and hold [POWER  Í/I] on the main unit for 3 seconds. (The settings remain 
unchanged.)—
To return all settings to the 
factory preset ≥Select “Yes” in “Restore Default Settings” in the Setup menu.
This returns all values in the Setup menu and the on-screen menu, except for 
“Remote Control Code”, “On-screen Language”, “IP Address/DNS Settings”, 
“Proxy Server Settings”, “DVD-Video Ratings”, “BD-Video Ratings” and “Network 
Service“ to the default settings. 36
To return to the factory 
preset
(No setting)≥Reset the unit as follows:
1Press [POWER  Í/I] on the unit to turn off the unit.
2 Press and hold [ ;], [POWER Í/I] and [