Panasonic Dmp Bd70v Operating Instructions

							RQT9412
21
Frame-by-frame
While paused, press [2] (2; ) or [ 1] (;1 ).
Each press shows the next frame.
≥ Press and hold to change in succession forward or backward.
≥ Press [ 1] (PLAY) to revert to normal playback speed.
≥ [BD-V] [AVCHD] : Forward direction [ 1] (;1 ) only.
Screen Aspect
When black bars are shown at the top, bottom, left, and right sides of 
the screen, you can enlarge the image to fill the screen.
1Press [SUB MENU].
2 Press [ 3,4] to select “Screen Aspect” and press [OK].
3 Press [ 2,1] to select “Side cut” or “Zoom”.
Normal: Normal output
Side cut: The black bars on the right and left sides of the 16:9  image disappear and the image is enlarged. Please note 
that the right and left sides of the image are cut off when 
the black bar is not displayed.
Zoom: The black bars on the top and bottom sides of the 4:3  image disappear and the image is enlarged. Please note 
that the top and bottom sides of the image are cut off 
when the black bar is not displayed.
≥ [BD-V] [DVD-V] : “Side cut” does not have any effect.
≥ When “TV Aspect” ( >34) is set to “4:3 Pan & Scan” or “4:3 
Letterbox”, the “Zoom” effect is disabled. 
Status messages
The status messages give you information about what is currently 
being played. Each time you press [STATUS], the information 
displayed will change.
Changing audio during play
[BD-V] [AVCHD]  [DVD-V]
You can change the audio channel number each time you press the 
button. This allows you to change the soundtrack language ( >30, 
Soundtrack), etc.
[DVD-VR] [MPEG2]
AudioLR >AudioL >Audio R
^---------------------------------}
Reproducing more natural audio(Discs recorded at 48 kHz or less)
This feature gives you a more  natural sound by adding higher 
frequency signals not recorded on the track.
Press [RE-MASTER] to select “Re-master 1”, “Re-master 2” or 
“Re-master 3”.
 Select the one that you like best.
≥ This function is effective for audio from the HDMI terminal or the 
DIGITAL AUDIO OUT terminal only when “Dolby D/Dolby D +/Dolby 
TrueHD” or “DTS/DTS-HD” is set to “PCM”. (However, in this case, 
audio is output as 2ch from the DIGITAL AUDIO OUT terminal.)
Showing FUNCTIONS menu
Some functions of this unit can be operated from the FUNCTIONS menu.
1 Press [FUNCTIONS].
≥Items to be displayed may vary with the media.
2 Press [ 3,4] to select the item and 
press [OK].
≥ Playback
≥ Top Menu
≥ Menu
≥ Viewing Picture
≥ Other Functions “Playlists”: 
You can play playlists created on DVD-VR. Press 
[3,4,2,1] to select the playlist and press [OK].“Setup” (>32)
“Card Management” ( >23)
≥ Network
Displays the Home screen of the VIERA CAST (>27)
≥ BD/DVD/CD Switches to the disc drive.
≥ SD Card Switches to the SD drive.
≥ USB device Switches to the USB drive.
≥ VHS Switches to the VHS drive.
OK
STATUS
PlayBD-Video
 T1     C1     0:05.140:20.52
T:  T i t l e
C: Chapter
PL: Playlist Items change 
depending on the 
disc played.
No display
Current position
Type of disc
Play status
Elapsed time in the title
e.g. 
[BD-V]
Depending on the kind of disc or the playback status, this 
display may not appear. To t a l  t i m e
SettingWhen playing LPCM sound
Type of musicOther types of 
sound
Effect level
Re-master 1 High tempo (e.g., pop and rock) Light
Re-master 2 Various tempos (e.g., jazz) Medium
Re-master 3 Low tempo (e.g., classical) Strong
Off Off Off
Soundtrack 1 ENG Digital  3/2.1ch
English is selected.
e.g. 
[DVD-V]
PlayDVD-RAM(VR)
AudioLR“AudioLR” is 
selected
RE-MASTER
To p  M e n uMenu
USB deviceSD Card
Blu-ray Disc Player
FUNCTIONSDVD-Video
Other Functions
Network
VHS
e.g.,
Playback
DMP-BD70V-RQT9412_ENG.book  21 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
22
Playing HD Video or SD Video [AVCHD] [MPEG2]
It is possible to playback the HD (High Definition) video recorded on 
the Panasonic High definition Video Camera on the DVD-RAM/R/
RW/R DL/+R/+RW/+R DL or SD card, and SD (Standard Definition) 
Video recorded on the Panasonic SD Video Camera on the SD card.
1 Insert a disc or SD card. (> 19)
≥“Video (AVCHD)” or “Video 
(MPEG-2)” screen is displayed.
≥ If a media containing data in 
different file formats is inserted, the 
file selection menu may be 
displayed.
Press [ 3,4] to select “Play Video (AVCHD)” or “Play 
Video (MPEG-2)” and press [OK].
2Press [ 3,4,2,1] to select the title 
and press [OK].
To return to the previous screenPress [RETURN].
To exit the screenPress [DIRECT NAVIGATOR].
To switch from other menus to AVCHD or MPEG2 
menu
(If the media contains data in different file formats)
1) Press [FUNCTIONS].
2) Press [ 3,4] to select “Menu” and press [OK].
3) Press [ 3,4] to select “Play Video (AVCHD)” or “Play Video 
(MPEG-2)” and press [OK].
≥ It may pause for a few seconds on the break of images when 
editing such as partial deletion is performed.
≥ High definition video (transfer rate of 18 Mbps or faster) cannot be 
played back correctly if it was recorded on a DVD compatible to 
double speed or slower.
e.g.,
SD Card
Play Video (AVCHD)
Select an action or press [RETURN].
Play Pictures (JPEG)
Play Video (MPEG-2)
OK
RETURN
SUB
MENU
e.g., 
DIRECT NAVIGATORVideo (MPEG-2)Video
001
002
003
004
005
006
007
008
009
1009/  5
9/  5
9/  5
9/  6
9/  6
9/  6
9/  7
9/  7
9/  7
9/  7 Wed
Wed
Wed
Thu
Thu
Thu
Fri
Fri
Fri
Fri  
 
 
10:00AM
11:30AM11:59PM
10:00AM 11:30AM11:59PM
10:00AM
10:30AM
11:30AM11:59PMRec. Length
No. Date Day
Start Title NameSD CARD
SUB
MENU PlayPrevious NextRETURNPage  01/02
0:15.47
e.g., 
Chapter playback [DVD-VR]
1
Insert a disc ( >19).
≥“Title View” screen is displayed.
2 Press [ 3,4] to select the title and 
press [SUB MENU].
3 Press [ 3,4] to select “View 
Chapters” and press [OK].
4 Press [ 2,1] to select the chapter 
and press [OK].
e.g.,
DIRECT NAVIGATOR Title ViewVideoPicture
01
02
03
04
05
06
07
08
09
10 9/  5
9/  5
9/  5
9/  6
9/  6
9/  6
9/  7
9/  7
9/  7
9/  7
Wed
Wed
Wed
Thu
Thu
Thu
Fri
Fri
Fri
Fri IN 2
IN 2
VHS
VHS  
 
 
IN 2
IN 2 10:00AM
11:30AM11:59PM
10:00AM 11:30AM11:59PM
10:00AM
10:30AM
11:30AM11:59PMRec. Length
No. Date Day
Channel
StartTitle NameDVD-RAM(VR)
RGSUB
MENU PlayPrevious NextRETURNVideo
Picture Page  01/02
0:15 (SP)
e.g.,
Properties
View Chapters
To Picture
To display the title properties (recording 
date, etc.)
 Playing still pictures (
>24)
To select the chapter
DIRECT NAVIGATORChapter ViewDVD-RAM(VR)Video
Picture
PlayRETURNPage  001/001
002 003
Play01
0:00.20---------
You are now in ‘‘Chapter View.’’
Please select the chapter you
would like to start playback.
Press [RETURN] for ‘‘Title View.’’
001
0:00.00
e.g.,
DMP-BD70V-RQT9412_ENG.book  22 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
23
Enjoying BD-Live or BONUSVIEW in BD-Video [BD-V]
What is BONUSVIEW?
BONUSVIEW allows you to enjoy functions such as picture-in-p icture or secondary audio etc., with BD-Video supporting BD-ROM Pro file 1 version 
1.1/ Final Standard Profile.
What is BD-Live?
In addition to the BONUSVIEW function, BD-Video supporting BD-ROM  Profile 2 that has a network extension function allows you to enjoy more 
functions such as subtitles, exclusive images and online games by  connecting this unit to the Internet. In order to use the Internet feature, you must 
have this unit connected to a broadband network ( >16).
≥ These discs may not be on sale in certain regions.
≥The usable functions and the operating method may vary with each disc, please refer to the instructions on the disc and/or visi t their website.
Playing secondary video (picture-in-picture) and secondary audio
Enjoying BD-Live discs with Internet
To turn on/off secondary video
Press [PIP].
To turn on/off secondary audio
Set “Soundtrack” in “Secondary 
Video” to “On” or “Off” (>30, 
Press [DISPLAY] >  “Disc” > 
“Signal Type”)
The secondary audio is played. ≥
During search/slow-motion or frame-by-frame, only 
the primary video is displayed.
≥ When “BD-Video Secondary Audio” in “Digital Audio 
Output” is set to “Off”, secondary audio will not be 
played even if you set “Soundtrack” in “Secondary 
Video” to “On”. Please check that “BD-Video 
Secondary Audio” is set to “On” ( >33).
Secondary video
Primary video
Many BD-Live compatible discs require content to be downloaded onto an SD card ( >50, Local storage) in order to access the available 
BD-Live features.
≥ An SD card with 1 GB or more of free space (SD Speed Class Rating 2 or higher) needs to be inserted prior to inserting the BD-L ive compatible 
disc.
Some BD-Live content available on the Blu-ray discs may require an Internet account to be created in order to access the BD-Liv e 
content. Follow the screen display or instruction manual of the disc for information on acquiring an account.
Preparation
≥ Connect to the network. ( >16)
1 Insert an SD card (> 19).
≥If the SD card menu screen is displayed, press [DRIVE SELECT] on the remote 
control, select BD/DVD/CD.
2Insert the disc (>19).
≥For operation method, refer to the instructions on the disc.
To use the above functions, it is recommended that you format the card on this unit. 　
Format the card using the following procedures.  ≥
If you experience any problems, first, try formatting 
the SD card in this unit.
≥ A message may be displayed when SD card doesnt 
have enough storage capacity for BD-Live content.
Please make space available on the current SD 
card, or insert another SD card.
≥ While using this feature, do not remove the SD card. 
Doing so will cause playback to stop. 
≥ The  unit m ust  be connected to the Internet and set 
u p ( > 17)  to u se the BD-Li ve f unctions. “BD-Li ve 
Internet Access” may need to  be changed for certain 
discs ( >32) .
≥ When discs supporting BD-Live are played back, the 
player or disc IDs may be sent to the content 
provider via the Internet.  You can restrict Internet 
access ( >32) .
≥ The  unit is connected to the Internet  when BD-Liv e 
f u nctions are  used, generating comm unication 
charges.
Formatting SD cards/Deleting data
≥
If the SD card you use is formatted, all data on the card will be erased. It cannot be 
recovered.
1) Insert an SD card ( >19).
2) Press [FUNCTIONS].
3) Press [ 3,4] to select “Other Functions” and 
press [OK].
4) Press [ 3,4] to select “Card Management” and 
press [OK].
5) Press [ 3,4] to select “BD-Video Data Erase” or 
“Format SD Card” and press [OK].
6) Press [ 2,1] to select “Yes” and press [OK].
7)

Press [ 2,1] to select “Start” and press [OK].
Card Mana gement  No. of Files    6 
Free space    300 MB 
SD card 
Format this SD Card. OK 
RETURN 
BD-Video Data Erase Format SD Card 
Playback
DMP-BD70V-RQT9412_ENG.book  23 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
24
Playing still pictures [JPEG]
Playback of the BD-RE, DVD-RA M/R/R DL or CD-R/RW with still 
pictures recorded. This unit can also  play still pictures recorded on 
the SD card or USB memory. In addition, you can also connect 
Panasonic digital camera by USB connection.
(About structure of folders  D 37, “Structure of folders that can be 
played in this unit”)
Connecting a USB device
≥ Setup screen may be displayed on equipment connected with the 
USB. Set it to the mode for connecting to a PC.
≥ Also read the operating instructions of the connected equipment for 
details of connection and setup.
≥ Do not disconnect the USB connec tion cable while the device is 
being identified.
1 Insert a disc, SD card or USB 
device. ( >19)
BD-RE, DVD-RAM“Album View” screen is displayed.
≥When the “Title View” screen is displayed, press the [G] 
button to switch to the “Album View” screen.
≥ If the DVD-RAM containing both JPEG and AVCHD format 
is inserted, the file selection menu may be displayed.
DVD-R/R DL, CD-R/RW, 
SD card, USB device
≥If the media containing data in 
different file formats is inserted, the 
file selection menu may be displayed.
Press [ 3,4] to select “Play Picture (JPEG)” and 
press [OK].
“Picture View” screen is displayed.
B  Go to step  3
2Press [ 3,4,2, 1] to select the 
album and press [OK].
3 Press [ 3,4,2, 1] to select the 
still picture and press [OK].
≥ Press [ 2,1 ] to display the previous or next still picture.
≥ Press [ :, 9 ] to show other pages.
To return to the previous screenPress [RETURN].
To exit the screenPress [DIRECT NAVIGATOR].
DVD-RAM/R/R DL, CD-R/RW, SD card, USB device
To switch from other menus to JPEG menu(If the media contains data in different file formats)
1) Press [FUNCTIONS].
2) Press [ 3,4] to select “Menu” and press [OK].
3) Press [ 3,4] to select “Play Picture (JPEG)” and press [OK].
Useful functions during still picture play
Start Slideshow
You can display still pictures one by one at a constant interval.
BD-RE, DVD-RAM
1While the “Album View” screen is displayed
Press [ 3,4,2, 1] to select the 
album and press [SUB MENU].
2 Press [ 3,4] to select “Start 
Slideshow” and press [OK].
≥ You can also start slideshow by pressing [ 1] (PLAY) after selecting 
the album.
DVD-R/R DL, CD-R/RW, SD card, USB device
1While the “Picture View” screen is displayed
Press [SUB MENU].
2 Press [ 3,4] to select “Start 
Slideshow” and press [OK].
To stop slideshowPress [ ∫].
Connect to USB terminal
Panasonic digital camera, etc.
Specified cable such as 
accessory of the USB equipmentUSB connection cable
e.g.,
USB device
Select an action or press [RETURN].OK
RETURN
SUB
MENU
Play Pictures (JPEG)
Play Music (MP3)
e.g. 
Â
3(
 Total 8
106_DVD
 Total 1312/9/2006 
SUB
MENU
DIRECT NAVIGATORAlbum ViewDVD-RAM(VR)Video Picture
OK Press [OK] to go to Picture View.Previous Next SlideshowRETURNVideo
Picture Page  02/02
e.g.,
SUB
MENU
DIRECT NAVIGATORPicture ViewDVD-RAM(VR)
Play
RETURN
2006  9  12
Pa ge  001/001
0001
0005
0009 0006 0007 0008 0002 0003 0004
VidéoIma
ge
e.g.,
DMP-BD70V-RQT9412_ENG.book  24 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
25
Slideshow settings
In step 2 in Start Slideshow on page 24,
1 Press [ 3,4] to select “Slideshow 
Settings” and press [OK].
2
To change the display intervalPress [ 3,4 ] to select “Display Interval” and press [ 2,1 ] to 
select the interval (“Long”, “Normal” or “Short”).
≥ When a still picture with a large number of pixels is played, 
the display interval may become longer. Even if the setting is 
changed, the display interval may not become shorter.
To set display methodPress [ 3,4 ] to select “Transition Effect” and press [ 2,1] to 
select “Fade”, “Motion” and “Random”.
“Fade”: Pictures are changed by fading out and fading in.
“Motion”: Pictures are changed by fading out and fading in,  while it is enlarged, reduced, or moved up or down.
“Random”: In addition to the “Motion”, pictures are changed by  various methods.
To repeat slideshowPress [3,4 ] to select “Repeat Play” and press [ 2,1] to 
select “On” or “Off”.
To listen to Background MusicThe MP3 that is recorded on the USB device or the music CD 
can be played back as Background Music during the 
slideshow.
Press [ 3,4 ] to select “Soundtrack” and press [ 2,1] to 
select “On” or “Off”.
≥ You cannot search or skip the music.
≥ When the slideshow stops, the playback of the music also 
stops.
≥ When both the music CD and the USB device with MP3 
recorded is inserted to this unit, the music CD has a priority 
to be played back as Background Music.
To select a folderA folder to playback can be selected when a USB device with 
MP3 recorded is connected to this unit.
Press [ 3,4 ] to select “Soundtrack Folder” 
and press [OK], 
and press [ 2,1] to select folder.
3 Press [ 3,4, 2, 1] to select “Set” 
and press [OK].
Rotate
1While playing (except for slideshow)
Press [SUB MENU].
2 Press [ 3,4] to select “Rotate 
Right” or “Rotate Left” and press 
[OK].
≥ The rotation information will be stored until the unit is turned off or 
the media is removed.
Zoom out
This function is only available for small-sized still pictures.
1While playing (except for slideshow)
Press [SUB MENU].
2 Press [ 3,4] to select “Zoom out” 
and press [OK].
≥ To cancel “Zoom out”, press [ 3,4] to select “Zoom in” in step  2 
and press [OK].
≥ The zoom-out information will not be stored.
To select the still pictures in another folder
BD-RE, DVD-RAM
To switch to another higher folder
(Only if there is a multiple number of recognizable higher folders)
1While the “Album View” screen is displayed
Press [SUB MENU].
2 Press [ 3,4] to select “Select Root 
folder” and press [OK].
3 Press [ 2,1] to select the higher 
folder and press [OK].
DVD-R/R DL, CD-R/RW
1While the “Picture View” screen is displayed
Press [SUB MENU]. 
2 Press [ 3,4] to select “Select 
Folder” and press [OK].
3 Press [ 3,4] to select a folder and 
press [OK].
To show the picture properties
While playing
Press [STATUS] twice.
To exit, press [STATUS].
\JPEG\DCIM001
OK 
RETURN 
Select Root folder
Change the Album folder to be accessed.
Press [OK] to confirm
PicturesFolder selection
CD(JPEG)
    001 
        002 
        003 
        004 
        005 
        006  
        007 
        
008        009 
        010 
      
    103 
        104 
        105
021216_0026   F  2/25
OK RETURN
e.g.,
                                     
Photo     11/12/2007            Total        3/9
e.g. JPEG on DVD-RAM
Shooting date
Playback
DMP-BD70V-RQT9412_ENG.book  25 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							26
RQT9412
Playing a video cassette [VHS]
Other operations of Video cassette
(These functions may not work depending on the recording conditions.)
About basic play D 20, “Basic play (Playing video contents)”
Stop
Pause or Slow playback
PausePress [ ;] again or [ 1] (PLAY) to restart play. 
≥ Pause is automatically canceled after 5 minutes.
Slow playbackPress [ ;] and hold for about 2 seconds.
≥ Press [ 1] (PLAY) to revert to normal playback speed.
≥ There will be no audio output.
≥ Slow playback is automatically canceled after 10 minutes.
Fast-forward/Rewind or Cue/Review
Fast-forward/RewindWhile stopped, press [ 6] or [ 5].
Cue/ReviewWhile playing, press [ 6] or [ 5] (or press and hold).
≥ Each press changes the speed.
Normal mode  :  Approx. 9 times  

Approx. 13 times
3 times, 5 times mode : Approx. 27 times  

Approx. 43 times
≥ Press [ 1] (PLAY) to revert to normal playback speed.
≥ Hold [ 6] or [5 ] to start cue/review and release the button to 
restart normal playback.
≥ Cue and review are automatically canceled after 10 minutes.
VHS Index Search System (VISS)
The index search function makes use of the index signals recorded 
on the cassette to help you find the beginning of a desired program 
quickly and easily.
While stopped or during normal play, press [ :] or [9 ].
≥ Each press increases the number of skips.
≥ Press [ ∫] to cancel the search.
≥ Up to 20 index signals can be searched in either direction.
Frame-by-frame
While paused, press [ 1] (;1).
Each press shows the next frame.
≥ Press and hold to change in forward succession.
≥ Press [ 1] (PLAY) to revert to normal playback speed.
≥ It cannot go in reverse direction.
S-VHS Quasi Playback (SQPB)
This unit can play tapes recorded in S-VHS.
≥Some picture noise may occur depending on the type of tape used.
≥It is not possible to fully obtain the high resolution S-VHS is capable of.
Changing audio during play
You can change the audio type each time you press the button.
Hi-Fi stereo audio Normal audio
AudioLR >AudioL >Audio R> Audio
^------------------------------------------------}
Screen Aspect
When black bars are shown at the top, bottom, left, and right sides of 
the screen, you can enlarge the image to fill the screen. ( >21)
Status messages
The status messages give you information about what is currently 
being played. Each time you press [STATUS], the information 
displayed will change.
≥Press [CANCEL] to reset the tape counter (elapsed time) to 
“0:00.00”. The tape counter is autom atically reset when inserting a 
video cassette.
Adjusting the playback picture
Manual TrackingThe unit usually makes tracking adjustments automatically, but you 
may need to do it manually if noise appears.
However, automatic adjustment may take longer, or adjustment may 
not be possible depending on the cassette.
In such cases, adjust it manually.
While playing, press [TRACKING/V-LOCK  r] or [TRACKING/
V-LO C K j].
Repeat until the picture noise disappears.
≥Press [TRACKING/V-LOCK r, j] at the same time to return to auto tracking.≥ Audio may change to normal audio if it is adjusted too much.
≥ This function may not work with some tapes.
≥ To eliminate noise for paused images or during slow playback, 
adjust the tracking while playing back in slow playback.
Vertical Locking AdjustmentAdjust the vertical synchronization to stop the picture from shaking 
while paused.
While paused, press [TRACKING/V-LOCK  r] or [TRACKING/
V-LO C K j].
Repeat until the shaking stops.
≥ Press [TRACKING/V-LOCK  r, j ] at the same time to return to the 
standard position.
≥ This function may not work with some tapes.
≥The playback picture may be unstable during special playback 
(Pause, Slow playback, Cue/Review). 
When you play back a tape recorded in other than the SP mode, the 
picture and the sound may be unstable. 
However, these are not a malfunction.
≥ Tapes are automatically rewound once they reach the end (except 
during fast forwarding, etc.).
STOP
PA U S E
SLOW/SEARCH
OK
STATUS
PlayVHS cassette
    0:05.14   SP  
No display VHS drive indicator
Play status
Elapsed time in the title
e.g.,
Recording modeSP:Standard play mode
LP:2 times the length of SP mode
EP:3 times the length of SP mode
VP:5 times the length of SP mode
RQT9412~Body_mst.fm  26 ページ  ２００９年２月２８日　土曜日　午後２時４４分 
						

							RQT9412
27
Playing music [CD] [MP3]
You can generally play any available music CD or MP3 files recorded 
onto a DVD-R/R DL, CD-R/RW and USB device.
(About structure of folders  D 37, “Structure of folders that can be 
played in this unit”)
1 Insert a disc or USB device. ( >19)
≥If the media containing data in different file formats is 
inserted, the file selection menu may be displayed. 
Press [ 3,4] to select “Play Music (MP3)” and press 
[OK].
2 Press [ 3,4] to select the track and 
press [OK].
Play starts on the selected track.
To switch from other menus to MP3 menu(If the media contains data in different file formats)
1) Press [FUNCTIONS].
2) Press [ 3,4 ] to select “Menu” and press [OK].
3) Press [ 3,4 ] to select “Play Music (MP3)” and press [OK].
≥ You can use search and skip functions. ( >20)
≥ The screen switches to Screen Sa ver mode if there is no operation 
for 2 minutes after starting playback. (Playback continues.) 
Playing a track in another folder  [MP3]
1While the “Music list” is displayed
Press [SUB MENU].
2 Press [ 3,4] to select “Select 
Folder” and press [OK].
3 Press [ 3,4] to select a folder and 
press [OK].
≥ You cannot select folders that contain no compatible tracks.
To return to the previous screenPress [RETURN].
CD 
 Play Music (MP3)
Select an action or press [RETURN]. 
Play Pictures (JPEG)
OK 
RETURN SUB 
MENU 
e.g.,
 0.09  4.30
01
02
03
04
05
DIRECT NAVIGATORMusic listCD
No
Track Name Play Time Track1
Track1 4min30sec 
3min41sec 
4min30sec 
3min11sec 
5min  2sec 
Track25 Tracks / Total Play Time 20min54sec
Track3
Track4
Track5
Play
RETURN
“ ” indicates the track currently playing.
e.g.  [CD]
DIRECT NAVIGATORSelect Folder
CD(MP3)
    001 My favorite
        002 Brazilian pops
        003 Chinese pops
        004 Czech pops
        005 Hungarian pops
        006 Liner notes
        007 Japanese pops
        
008 Mexican pops        009 Philippine pops
        010 Swedish pops
            011 Momoko
    012 Standard number
        013 Piano solo
        014Vocal
MP3 music   F  6/25
OK RETURN
Selected folder No. /
To ta l  f o l d e r s
If the folder has no 
track, “– –” is displayed 
as folder number.
e.g. 
Enjoying VIERA CASTTM
You can access a selection of Internet services from the Home 
screen with VIERA CAST, for example YouTube, Picasa Web 
Albums. (Current as of March 2009)
≥
VIERA CAST re quires a broad band Internet connection. Dial- up 
Internet connections cannot  be  used.
Preparation≥ N et work connection ( >16)
≥ N et work setting ( >17)
1 Press [VIERA CAST].≥Message is displayed. Please read these instructions carefully 
and then press [OK] to start VIERA CAST function.
2 Press [3, 4,2, 1] to select the 
item and press [OK].
≥ You can operate VIERA CAST using the following buttons on 
the unit’s remote control. 
[3 ,4 ,2, 1], [OK], [RETURN], [SUB MENU], colored 
buttons and numbered buttons.
≥To access more features on YouTube or Picasa Web Albums site, 
enter your user ID and password that you have previously set up 
with these sites through the Internet on your PC. However, not all 
features may be accessible through VIERA CAST.
VIERA CAST Home screen;
Regarding “Settings”
Set VIERA CAST Home screen.
≥ My Account: You can remove your account from the unit.
≥ Lock: Password can be used to lock YouTube and 
Picasa Web Albums.
≥ Notices
≥Depending on the usage conditions, it may take a while to load the page.≥The connection to the Internet may take time or the Internet may not 
be connected depending on the connection environment. 
≥ The unit is connected to the Internet when VIERA CAST is used, 
generating communication charges where applicable.
To return to VIERA CAST Home screenPress [VIERA CAST].
To exit from VIERA CASTPress [FUNCTIONS] or [TOP MENU/DIRECT NAVIGATOR], then 
press [RETURN] to cancel the menu.
≥Set the “Network Lock” to “On” to restrict using VIERA CAST. (>35)
≥If the audio is distorted while using the VIERA CAST feature set the 
“Audio Auto Gain Control” to “Off” ( >35)
≥ When the entire picture cannot be displayed on the screen set the 
“Reduce to Screen Size” to “On” ( >35)
≥ Set the “On-screen Language”, to switch the language for Home 
screen. ( >33)
≥ Set the “Time Zone” or “DST” when wrong time is displayed on the 
screen. ( >35)
≥VIERA CASTTM home screen is subject to change without notice.≥The services through VIERA CASTTM are operated by their 
respective service providers, and service may be discontinued either 
temporarily or permanently without notice. Therefore, Panasonic will 
make no warranty for the content or the continuity of the services.
≥All features of websites or content of the service may not be available.≥ Some content may be inappropriate for some viewers.
≥ Some content may only be available for specific countries and may 
be presented in specific languages.
Welcome to Network Service
Your Panasonic Network Service allows you to access web-based content on \
your Player/Recorder. Some 
web content may be inappropriate for some viewers. You may disable the Network Service feature by  following the instructions found in your Operating Instructions. 
Some web content may only be available from within select countries and \
may be presented in languages  different than the one selected in your On-screen Language settings menu.
Its recommanded your player/recorder is connected to Full HD display wi\
th HDMI. The display of the  contents may be truncated, depending on your TV. You may reduce to screen size by following the  instructions found in your Operating Instructions.
ENTERDon’t show this message again
Images are for 
illustration 
purposes, message 
may change 
without notice.
Settings
Panasonic SelectFeatured Videos
BloombergXXX
XXX
XXX7465.95
778.94
1442.82 -89.68
-9.47998 -25.15TELEVISION15min. delay
Weather28ÃNew York, NY
WNW7mph
Web AlbumsTM
After you access YouTube or Picasa Web Albums from the 
VIERA CAST Home screen and 
add your favorite videos or 
albums to VIERA CAST, you 
can choose them easily from 
the Home screen.
Images are for illustration purpose, 
contents may change without notice.
Playback
DMP-BD70V-RQT9412_ENG.book  27 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
28
Linked operations with the TV (VIERA LinkTM “HDAVI ControlTM”)
Preparation
1) Connect this unit to your TV or amplifier/receiver with an HDMI cable (>11–12).
2) Set “VIERA Link” to “On” ( >34). (The default setting is “On”.)
3) Set the “HDAVI Control” operations on the connected equipment (e.g., TV).
4) Turn on all “HDAVI Control” compatible equipment and select this unit’s input channel on the connected TV so that the “HDAVI  Control” 
function works properly.
Also when the connection or settings are changed, repeat this procedure.
≥ When [ 1] (PLAY) is pressed on this unit for “Automatic input switching”  or “Power on link”, the playback image is not immediately displayed on 
the screen and it may not be possible to watch  the contents from where playback started.
In this case, press [ :] or [6] to go back to where playback started.
Playing music continuously even after turning off power to the television
When the unit is connected to a Panasonic TV (VIERA) that suppor ts HDAVI Control 2 or later and an amplifier/receiver supports VIERA Link, 
the unit is turned off if the power to the tele vision is turned off, since “Power off link” (Dabove) operates. 
The following operations make it possible to keep the  power of the unit on and to play music continuously.
1 While playing music
Press [SUB MENU].
2 Press [ 3,4] to select “TV Power” and press [OK].
≥ Sound may be discontinued for several seconds when  the power to the television is turned off.
≥ If the operation mentioned above is executed while audio is output fr om the television, the sound may not be output from the amplifier/receiver. 
It is recommended to set the amplifier/receiver beforehand so that audio will be output from the amplifier/receiver.
Automatic 
input switchingWhen the following operations are performed, the televi sion will automatically switch the input channel and 
display the corresponding action.
– When play starts on the unit
– When an action that uses the display screen is performed  (e.g., Direct Navigator screen)
Power on linkWhen the television is off and the following operations are performed, the television will automatically turn on and 
display the corresponding action.
– When play starts on the unit
– When an action that uses the display screen  is performed (e.g., Direct Navigator screen)
Power off linkAll connected equipment compatible with “HDAVI Control”,  including this unit, automatically turns off when you 
switch the television off.
≥ This unit automatically turns off even  during playback or any other operation.
Stand-by power 
save
Auto power 
stand-byStand-by power save and Auto power stand-by responsibly manage your systems power consumption
These functions are available with the TV that supports “HDAVI Control 4”.
About the Stand-by power save function
It is possible to minimize the stand-by power of this unit by  the Power off link, even if the “Quick Start” of this unit 
is set to “On” ( >36).
≥ “Stand-by power save” setting is required to be activated on the TV.
≥ When turning this unit on or off without using Power off link function, it is impossible to minimize the stand-by 
power of this unit.
About the Auto power stand-by function
If connected with a TV (VIERA) with the “Auto power stand-by” setting activated on the TV, when switching the TV input, the 
unit will be automatically turned to standby. For details please read the operating instructions of the TV. 
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or 
amplifier/receiver under “HDAVI Control”. 
You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipmen t 
for operational details.
≥VIERA Link “HDAVI Control”, based on the control functions provid ed by HDMI which is an industry standard known as HDMI CEC (Co nsumer 
Electronics Control), is a unique function that we have developed and added. As such, its operation with other manufacturers’ e quipment that 
supports HDMI CEC cannot be guaranteed.
≥This unit supports “HDAVI Control 4” function. “HDAVI Control 4” is the newest standard (current as of Decemb er, 2008) for Panasonic’s HDAVI Control compatible equipment. Thi s standard 
is compatible with Panasonic’s conventional HDAVI equipment.
≥Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.
DMP-BD70V-RQT9412_ENG.book  28 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
29
Easy control only with VIERA remote control
If you connect this unit to the TV that supports “HDAVI Control 2” or later with an HDMI cable, you can enjoy using more convenient functions.
You can operate this unit using buttons on the TV remote control.
The buttons that you can use for this unit vary depending on the  TV. For details, refer to the operating instructions of the TV.
Use the remote control supplied with this unit if you cannot  operate this unit using buttons on the TV remote control.
≥ The operation of this unit may be interrupted when you press incompatible buttons on the TV remote control.
When you want to leave the TV on and set only this unit to standby mode
Press [ ÍPOWER] on this unit’s remote control and set to standby mode.
When not using “HDAVI Control” 
Set “VIERA Link” in the Setup menu to “Off”. ( >34)
Using the 
FUNCTIONS 
menu to 
operate this 
unitBy using the TV remote control, you  can play media using the FUNCTIONS menu.
1Press the button for VIERA Link on the remote control.
2 Select the player.
≥The FUNCTIONS menu is displayed.
Using the sub 
menu to 
operate this 
unitBy using the TV remote control, you can play discs using the “Control Panel” and display the Top Menu (for BD-Video 
and DVD-Video) or Pop-up Menu (for BD-Video).
1Press [SUB MENU].
≥This can also be displayed by using the VIERA menu screen.
≥You cannot use the sub menu while the Top Menu for BD-Video or 
DVD-Video is displayed.
2 Select an item, then press [OK].
e.g.,
OK RETURN 
To p  M e n uMenu
USB deviceSD Card
Blu-ray Disc Player
FUNCTIONSDVD-Video
Other Functions
Network
VHS
OK
RETURN
SUB
MENU
Control Panel
Screen Aspect
To p  M e n u
Pop-up Menu
e.g.,
Control PanelControl Panel is displayed. Follow the indications on the screen.
Screen Aspect(> 21)
Top Menu  [BD-V] [AVCHD]  [DVD-V]Top menu is displayed.
Menu  [DVD-V]Menu is displayed.
Pop-up Menu  [BD-V]Pop-up menu is displayed.
Rotate Right [JPEG]Rotate the still picture.
Rotate Left [JPEG]
Zoom in [JPEG]Enlarge or reduce the still picture.
Zoom out  [JPEG]
Playback
DMP-BD70V-RQT9412_ENG.book  29 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
30
Settin gs
Changing settings with the on-screen menu (except [VHS])
On-screen menu operations 
What you can change with the on-screen menu
 
Some items may be changed only on the disc specific menu. ( >20)
1 Press [DISPLAY].
2Press [3,4] to select 
the menu and press [
1].
3 Press [ 3,4] to select 
the item and press [ 1].
4 Press [ 3,4] to select 
the setting.
≥ Depending on the condition of the unit 
(playing, stopped, etc.) and media 
contents, there may be some items 
that you cannot select or change.
≥ Some items can be changed by 
pressing [OK].
To exit the on-screen menuPress [DISPLAY].
MenusItemsSettings and details
DiscSignal Type [BD-V]
≥Primary Video
Video: The original video recording method appears. (Dbelow, Video attribute)Soundtrack: Select the type of audio or language. ( Dbelow, Language, Audio attribute)
≥ Secondary Video
Video: Select on/off of images.
The original video recording method appears. (D below, Video attribute)
Soundtrack: Select on/off of audio and the language. ( Dbelow, Language, Audio attribute)
Video [AVCHD]
The original video recording method appears. (D below, Video attribute)
Soundtrack [AVCHD] [DVD-V] 
Select the type of audio or language. ( Dbelow, Language, Audio attribute)
[DVD-VR] [MPEG2]
≥ The audio attributes appear. ( Dbelow, Audio attribute)
Subtitle [BD-V] [AVCHD] [DVD-V] 
Turn the subtitle on/off and select the language. ( Dbelow, Language)
[DVD-VR]  (Only discs that contain subtitle on/off information)
≥ Turn the subtitle on/off.
Subtitle Style [BD-V]
Select the subtitle style.
Audio channel [DVD-VR] [MPEG2]
(D 21, Changing audio during play)
Angle [BD-V] [DVD-V]
Select the number of the angle.
Video Audio 
Play Signal Type 
Subtitle 
Subtitle Style 
Off PiP
- Ang le - 
1ENG 
Disc 
Menus Items Settings
e.g., BD-Video
LanguageAudio attribute
ENG: English
FRA: French
DEU: German
ITA: Italian
ESP: Spanish
NLD: Dutch
SVE: Swedish
NOR: Norwegian DAN: Danish
POR: Portuguese
RUS: Russian
JPN: Japanese
CHI: Chinese
KOR: Korean
MAL: Malay
VIE: VietnameseTHA: Thai
POL: Polish
CES: Czech
SLK: Slovak
HUN: Hungarian
FIN: Finnish
¢
: OthersLPCM/ Digital/ Digital+/ TrueHD/
DTS/DTS 96/DTS-HD HI RES/DTS-HD 
MSTR/MPEGSignal type
ch (channel) Number of channels
k (kHz) Sampling frequency
b (bit) Number of bits
Video attribute
MPEG-2 This is a standard for compressing and decompressing color motion pictures efficiently. This compression method is used 
for DVDs, etc.
MPEG-4 AVC These are standards for compressing and decompressing color  motion pictures more efficiently than MPEG-2 and used 
for Blu-ray Discs, etc.
VC-1
DMP-BD70V-RQT9412_ENG.book  30 ページ  ２００９年２月２７日　金曜日　午後７時２３分