Panasonic Dmp Bd70v Operating Instructions

							Operating InstructionsBlu-ray Disc Player
Model No. DMP-BD70V
Dear customer
Thank you for purc hasing this product.
For optimum performance and safety, please read these instructions carefully.
Before connecting, operating or adjusting this  product, please read the instructions completely. Please keep this manual for fu ture reference.
Region management information
BD-Video 
This unit plays BD-Video marked with labels containing the region code A. Example:
DVD-Video
This unit plays DVD-Video marked with  labels containing the region number “1” or “ALL”. Example:
2
4
1ALL1
 For Canada only: The word “Participant” is used in place of the word 
“Partner”.
As an ENERGY STAR Partner,
Panasonic has determined that
this product meets the ENERGY STAR
guidelines for energy efficiency.®
®If you have any questions contact[U.S.A.[and[Puerto[Rico]:1-800-211-PANA(7262)
[Canada]:1-800-561-5505
[Only[for[U.S.A.[and[Puerto[Rico]:The warranty can be found on 
page 46.
[Canada]:The warranty can be found on page 47.
La referencia rápida en español se puede encontrar en la página 49.
until 
2009/3/16
RQT9412-P
PPC
RQT9412_ENG_P_Cover_mst.fm  1 ページ  ２００９年２月２８日　土曜日　午後１２時２分 
						

							2
RQT9412
Getting started
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. 
Follow the safety instructions on the unit and the applicable 
safety instructions listed below. Keep these operating instructions 
handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat  registers, stoves, or other apparatus (including amplifiers) 
that produce heat.
9) Do not defeat the safety purpose of the polarized or  grounding-type plug. A polarized plug has two blades with 
one wider than the other. A grounding-type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. If the provided plug 
does not fit into your outlet, consult an electrician for 
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched  particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.
11) Only use attachments/accessories specified by the  manufacturer.
12) Use only with the cart, stand, tripod, bracket, or  table specified by the manufacturer, or sold 
with the apparatus. When a cart is used, use 
caution when moving the cart/apparatus 
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms  or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is  required when the apparatus has been damaged in any way, 
such as power-supply cord or plug is damaged, liquid has 
been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR 
PRODUCT DAMAGE, 
≥DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO 
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, 
SHALL BE PLACED ON THE APPARATUS.
≥USE ONLY THE RECOMMENDED ACCESSORIES.
≥DO NOT REMOVE THE CO VER (OR BACK); THERE 
ARE NO USER SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A 
BOOKCASE, BUILT-IN CABINET OR IN ANOTHER 
CONFINED SPACE. ENSURE THE UNIT IS WELL 
VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK 
OR FIRE HAZARD DUE TO OVERHEATING, ENSURE 
THAT CURTAINS AND ANY OTHER MATERIALS DO 
NOT OBSTRUCT THE VENTILATION VENTS.
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR 
PERFORMANCE OF PROCEDURES OTHER THAN 
THOSE SPECIFIED HEREIN MAY RESULT IN 
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS  AND DO NOT REPAIR 
YOURSELF. REFER SERVICING TO QUALIFIED 
PERSONNEL.
CAUTION
Danger of explosion if battery is incorrectly replaced. 
Replace only with the same or equivalent type 
recommended by the manufacturer. Dispose of used 
batteries according to the manufacturer’s instructions.
The socket outlet shall be installed near the equipment and 
easily accessible. The mains plug of the power supply cord 
shall remain readily operable.
To completely disconnect this apparatus from the AC Mains, 
disconnect the power supply cord plug from AC receptacle.
THE FOLLOWING APPLIES ONLY IN THE U.S.A.FCC Note:This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to Part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses, and can radiate r adio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmf ul interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:
≥ Reorient or relocate the receiving antenna.
≥ Increase the separation between the equipment and receiver.
≥ Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected.
≥ Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, follow the 
attached installation instructions and use only shielded 
interface cables when connecti ng to peripheral devices.
Any changes or modifications not ex pressly approved by the party 
responsible for compliance could void the user’s authority to 
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause 
undesired operation.
Declaration of Conformity
Trade Name: Panasonic
Model No.: DMP-BD70V
Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094
Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)
(Inside of product)
The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of uninsulated “dangerous 
voltage” within the product’s enclosure that may be 
of sufficient magnitude to constitute a risk of 
electric shock to persons.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRICSHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral triangle 
is intended to alert the user to the presence of 
important operating and maintenance (servicing) 
instructions in the literature accompanying the 
appliance.
RISK OF ELECTRIC SHOCK DO NOT OPEN
DMP-BD70V-RQT9412_ENG.book  2 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
3
Unit and media care
Media handling
Clean discs
Wipe with a damp cloth and then wipe dry.
Media handling precautions
Disc
≥Handle discs by the edges to avoid inadvertent  scratches or fingerprints on the disc.
≥ Do not attach labels or stickers to discs (This may cause disc warping, rendering it unusable).
≥ Do not write on the label side with a ball-point pen or other writing instrument.
≥ Do not use record cleaning sprays, benzine, thinner, static  electricity prevention liquids or any other solvent.
≥ Do not use scratch-proof protectors or covers.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed  stickers or labels (rented discs etc).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
Card
≥ Clean any dust, water, or foreign matter from the terminals on the rear side of the card.
Video cassette
≥ Poor quality or damaged video cassettes can caus e the heads to become dirty and malfunction.
≥ Never use video cassettes on which juice has been spilled or thos e that are extremely damaged since this will not only cause the heads to 
become dirty, but will also make the unit malfunction.
Maintenance
Clean this unit with a soft, dry cloth
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the instructions that came with the cloth.
Observe the following points to ensure continued listening and viewing pleasure.
Disc lens
Dust and dirt may adhere to the unit’s lens over time, making it impossible to play discs.
Use the lens cleaner (not included) about once every year, depending on frequency of use and the operating environment. Careful ly read 
the lens cleaner’s instructions before use.
Video headsDirt on the video heads can cause poor play. 
If the picture does not improve, use a head-cleaning cassette. If the problem persists, seek advice from a qualified service pe rson.
To dispose or transfer this unit
This unit may record information of your operating procedures. If you discard this unit either by disposal or transfer, then follow the 
procedures to return all the settings to the factory presets to delete the recorded information. ( >40, “To return to the factory preset”)
≥When BD-Video is played back, the operation history may be recorded in the memory of this unit. The recorded contents differ de pending on the 
disc.
DO  DO NOT
Lens cleaner: RP-CL720PP≥
This lens cleaner is sold as  specific for DIGA, but can be used 
without problem on this unit as well.
Head-cleaning cassette: NV-TCL30PT (Only for U.S.A.)
Getting started
RQT9412~Safety_mst.fm  3 ページ  ２００９年３月２日　月曜日　午後１２時１１分 
						

							RQT9412
4
Table of contents
Getting started
IMPORTANT SAFETY INSTRUCTIONS ................................2
Unit and media care ............................3
Accessory information........................5
Media (Disc/Card/USB device/ Video cassette) information ............6
Audio and video information ..............8
Connections .......................................10
Remote control and unit  reference guide...............................14
Setting ................................................15
Broadband network connection.......16
Firmware updates ..............................16
Network settings................................17
Inserting or removing media ............19
Playback
Basic play  (Playing video contents) ................20
Playing HD Video or SD Video .........22
Chapter playback...............................22
Enjoying BD-Live or BONUSVIEW in  BD-Video .........................................23
Playing still pictures..........................24
Playing a video cassette ...................26
Playing music ....................................27
Enjoying VIERA CAST
TM...................27
Linked operations with the TV 
(VIERA 
Link
TM “HDAVI ControlTM”) ................. 28
Settings
Changing settings with the  on-screen menu ............................. 30
Changing the unit’s settings ............ 32
Reference
About MP3/JPEG files....................... 37
Messages ........................................... 38
Troubleshooting guide ..................... 40
Specifications .................................... 44
Product Service ................................. 45
Limited Warranty (Only for U.S.A.  and Puerto Rico) ............................ 46
Limited Warranty  (Only for CANADA) ........................ 47
Licenses ............................................. 48
Referencia rápida en español  (Spanish Quick Reference) ........... 49
Glossary ............................................. 50
Index .................................... Back cover
BD70P-RQT9412_ENGTOC.fm  4 ページ  ２００９年３月２日　月曜日　午後３時５２分 
						

							RQT9412
5
27
Accessory information
(ONLY FOR CANADA)
The enclosed Canadian French label sheet corresponds to the English display on the front and back side of the unit.
Using the remote control
BatteriesInsert so the poles (i and j) match those in the remote control.
When closing the lid, insert it from the j  (minus) side.
≥ Use alkaline or manganese batteries.
≥ Do not mix old and new batteries.
≥ Do not use different types at the same time.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in an automobile exposed to direct 
sunlight for a long period of time with doors and windows closed.
≥ Do not take apart or short circuit.
≥ Do not attempt to recharge alkaline or manganese batteries.
≥ Do not use batteries if the covering has been peeled off.
Mishandling of batteries can caus e electrolyte leakage which can 
damage items the fluid contacts and may cause a fire.
Remove batteries if the remote control is not going to be used for a 
long period of time. Store in a cool, dark place.
Use
If you cannot operate the unit or other equipment using the remote 
control after changing the batteries, please re-enter the codes 
(> 15, 36).
CAUTION
Do not place objects in front of the unit. The disc tray may collide with 
objects when it is opened, and this may cause injury.
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for 
replacement parts.
(Product numbers correct as of March 2009. These may be subject to change.)
Only for U.S.A. and Puerto Rico:  To order accessories, refer to “Accessory Purchases (United States and Puerto Rico)” 
on page 46.
Only for Canada:  To order accessories, call the dealer from whom you have made your purchase.
∏∏∏∏
1 Remote control(N2QAYB000382)1 Audio/Video  cable
(K2KA6BA00004)
2Batteriesfor remote control1 AC power supply cord(K2CB2CB00022)
≥For use with this unit only. 
Do not use it with other equipment.
Also, do not use cords from other 
equipment with this unit.
(Only for U.S.A. and Puerto Rico)
Product Registration Card
Please complete and return the included product registration card, or register via the Internet at: 
http://www.prodreg.com/panasonic/
R6/LR6, AA


20
30 2030
Remote control signal sensor
7 m (23 feet) directly in front 
of the unit
Getting started
Reference
Settings
Playback
DMP-BD70V-RQT9412_ENG.book  5 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
6
Media (Disc/Card/USB device/Video cassette) information
Commercially sold discs
This chart shows the different type of retail/commercial discs you can use, and also includes the industry-standard logos that  should appear on the 
discs and/or packaging.
User recorded media
This chart shows the different type of discs re corded with other devices that you can use.
 This mark means you must finalize the disc with the DVD recorder, etc. before playback. For details about finalizing, refer to  the 
operating instructions for your equipment.
Type of mediaLogoFeatures Indicated as
BD-VideoThis format supports High Definition video and audio content 
including:
≥ BD-Live (BD-ROM Profile 2). This  format provides interactive 
features when this player is connected to the Internet via a 
broadband connection.
≥ BONUSVIEW allows picture-in-picture functions to be 
viewed.[BD-V]
DVD-VideoThis format supports high quality video and audio playback. [DVD-V]
CDCompact Discs (CD’s) that contain audio and music
≥Operation and sound quality of CDs that do not conform to 
CD-DA specifications (copy control CDs, etc.) cannot be 
guaranteed.
≥The digital audio content side of a DualDisc does not meet the 
technical specifications of the Compact Disc Digital Audio (CD-DA) 
format so play may not be possible.
[CD]
Type of mediaLogoFormats Indicated as
BD-RE≥Version 3 of the BD-RE Recording Format
≥ JPEG format [BD-V]
[JPEG]
BD-R≥ Version 2 of the BD-R Recording Format [BD-V]
DVD-RAM≥Version 1.1 of the DVD Video Recording Format
≥ JPEG format
≥ AVCHD format [DVD-VR]
[JPEG]
[AVCHD]
DVD-R/RW≥ DVD-Video Format
≥ Version 1.1 of the DVD Video Recording Format
≥ AVCHD format
≥ MP3 format (DVD-RW is not supported)
≥ JPEG format (DVD-RW is not supported) [DVD-V]
[DVD-VR] [AVCHD] [MP3]
[JPEG]
DVD-R DL≥ DVD-Video Format
≥ Version 1.2 of the DVD Video Recording Format
≥ AVCHD format
≥ MP3 format
≥ JPEG format [DVD-V]
[DVD-VR] [AVCHD]
[MP3]
[JPEG]
r R/ rRW/ rRDL 
—≥+VR (+R/+RW Video Recording) Format
≥ AVCHD format [DVD-V]
[AVCHD]
CD-R/RW —≥CD-DA format
≥ MP3 format
≥ JPEG format [CD]
[MP3]
[JPEG]
≥ It may not be possible to play the above discs in some cases due to the type of discs, the condition of the recording, the reco rding method and 
how the files were created.
≥ When a disc recorded in the AVCHD format is being played, the video may be paused for a few seconds at portions spliced, due to  deletion or 
editing.
Finalized
Finalized
Finalized
Finalized
Finalized
DMP-BD70V-RQT9412_ENG.book  6 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
7
SD cards
This chart shows the different type of cards recorded with other devices that you can use.
* Includes miniSD Card and microSD Card
The card types mentioned above will be referred to as “SD card” in these operating instructions.
≥ MiniSD Cards and microSD Cards can be used, but must be used with  an adaptor card. These are usually supplied with such cards, 
or otherwise customer provided.
≥ We recommend using a Panasonic SD card. Please confirm the latest information on the following website: 
http://panasonic.co.jp/pavc/global/cs  
(This site is in English only.)
≥ This unit is compatible with SD Memory Cards that meet SD  Card Specifications FAT12 and FAT16 formats, as well as SDHC 
Memory Cards in FAT32 format.
≥ When using cards from 4 GB to 32 GB, only SD cards using the SDHC logo can be used.
≥ Useable memory is slightly less than the card capacity.
≥ If the SD card you are attempting to use was formatted on a PC, it is possible that the card may not work properly.
≥ Keep the Memory Card out of reach of children to prevent swallowing.
≥ When a card recorded in the AVCHD format is being played, t he video may momentarily pause, especially where one recording ends and the next 
one begins. This is normal and does not indicate a problem.
≥ To protect the card’s contents, move the record prevention tab (on the SD card) to “LOCK”.
USB devices
This unit can playback pictures by  connecting the USB memory recorded with a PC or similar in following formats, and Panasonic  digital cameras 
connected via USB cable.
Compatible USB devices
≥ USB de vices  which are defined as USB mass storage class.
–USB de vices that s upport USB 1.0/1.1 and USB 2.0 F ull Speed/High Speed.
≥ USB de vices of  up to 128 GB can  be  used.
≥ USB de vices that s upport  bulk only transfer.
CBI (Control/B ulk/Interr upt) is not s upported.
≥ Digital Cameras  which re quire additional program installation  when connected to a PC are not s upported.
≥ MTP (Media Transport Protocol) de vice is not supported.
≥ A m ulti-port USB card reader is not s upported.
File system
≥ FAT12, FAT16 and FAT32 file systems are s upported.
≥ UDF/ NTFS/exFAT file system is not s upported.
≥ Depending on the sector size, some files may not  work.
≥ Only the first partition on USB de vices with m ulti-partition is s upported.
Despite meeting the conditions mentioned a bove, there may  be USB de vices that cannot  be  used  wit
h this u nit.
This unit does not support USB device charging.
Video cassettes
≥ You can use video cassettes with the VHS and  3, but the unit is unable to make full use of the characteristics of S-VHS video cassettes. 
The explanations concerning video cassettes are indicated by  [VHS].
Discs that cannot be played in this unit
≥BD-RE discs (with cartridge)
≥ 2.6 GB and 5.2 GB DVD-RAM
≥ DVD-RAM that cannot be removed from cartridge
≥ 3.95 GB and 4.7 GB DVD-R (Authoring)
≥ Version 1.0 DVD-RW
≥ DVD-ROM, CD-ROM, CDV, SACD, Photo CD, MV-Disc and PD
≥ DVD-Audio
≥ Video CD and SVCD
≥ WMA discs
≥ DivX discs
≥ PAL Discs
≥ HD DVD
≥ BD-Video discs recorded at a rate of 50 fields/sec
≥ Any other disc that is not specifically supported
Type of mediaLogoFormats Indicated as
SD Memory Card* (from 8 MB to 2 GB)
SDHC Memory Card (from 4 GB to 32 GB)—
≥JPEG format
≥ AVCHD format
≥ MPEG2 format [JPEG]
[AVCHD] [MPEG2]
Type of mediaLogoFormats Indicated as
USB devices —≥MP3 format
≥ JPEG format [MP3]
[JPEG]
ADAPTER
Getting started
DMP-BD70V-RQT9412_ENG.book  7 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
8
Audio and video information
About audio from audio output terminals
Before connecting, read the table below, and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”,  “Dolby D/Dolby 
D +/Dolby TrueHD” or “DTS/DTS-HD”). ( >9)
≥ The number of channels listed is the maximum possible number of output channels.
HDMI AV OUT/DIGITAL AUDIO OUT
≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.
*1 When the connected equipment is not supported with these audio forma ts, the audio is output as Dolby Digital bitstream, DTS Digital Surround 
bitstream or down-mixed 2ch PCM (e.g., TV).
*2 [BD-V] : When playing BD-Video without secondary audio or button click sound,  the audio is output as the same format as if “BD-Video 
Secondary Audio” wa s set to “Off”.
*3 When the connected equipment is not supported with multi c hannel surround, the audio is output as down-mixed 2ch PCM.
*4 [BD-V] : When the connected equipment is supported with 7.1 channel surround,  the audio output is amplified from 5.1ch or 6.1ch to 7.1ch 
depending on the DTS, Inc. specifications.
*5 With PCM output, Dolby Digital EX becomes PCM audio decoded as Dolby Digital, DTS-ES recorded to DVD-Video becomes PCM audio  decoded as DTS Digital Surround, and DTS-ES recorded to  BD-Video becomes PCM audio decoded as DTS-ES.
*6 [BD-V] : When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX  is output as Dolby Digital and DTS-ES is output as DTS Digital 
Surround, however if playing BD-Video without secondary audio or but ton click sound, the audio is output as the original format.
Enjoying High Bit rate Audio of BD-Video [BD-V]
This unit supports high bit rate audio (Dolby Digital Plus, Do lby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio)  adopted in BD-Video.In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given ab ove)
NECESSARY CONNECTIONS≥HDMI AV OUT terminal: ( >12)
NECESSARY SETTINGS ( >9)≥Set “BD-Video Secondary Audio” to “Off”.
≥ HDMI AV OUT terminal: Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM” .
≥The button click sound on the menu and audio with  secondary video in picture-in-picture mode (>23) is not output.
TerminalHDMI AV OUTDIGITAL AUDIO OUT
“Dolby D/Dolby D +/Dolby TrueHD”/
“DTS/DTS-HD” “Bitstream”*1“PCM”*3“Bitstream”“PCM”
“BD-Video Secondary Audio”“On”*2“Off”“On”“Off”“On”/“Off”“On”/“Off”
Dolby Digital/
Dolby Digital EX*5
Dolby Digital/
Dolby Digital 
EX*
6
Dolby Digital/
Dolby Digital EX 5.1ch PCMDolby Digital/
Dolby Digital 
EX*
6
Down-mixed 2ch PCM
Dolby Digital PlusDolby Digital
Dolby Digital  Plus 5.1ch PCM*27.1ch PCM Dolby Digital
Dolby TrueHDDolby TrueHD
DTS Digital Surround/
DTS-ES
*5
DTS Digital 
Surround/
DTS-ES*
6
DTS Digital  Surround/ DTS-ES [DVD-V]
: 5.1ch PCM DTS Digital 
Surround/
DTS-ES*
6[BD-V] : 7.1ch PCM*4
DTS-HD High Resolution AudioDTS Digital 
Surround
DTS-HD High  Resolution  Audio
7.1ch PCM*4DTS Digital Surround
DTS-HD Master AudioDTS-HD Master  Audio
7.1ch LPCMDown-mixed 5.1ch PCM7.1ch PCM Down-mixed 
5.1ch PCM*27.1ch PCM Down-mixed 
2ch PCM
DMP-BD70V-RQT9412_ENG.book  8 ページ  ２００９年２月２７日　金曜日　午後７時２３分 
						

							RQT9412
9
Regarding 24p output [BD-V]
Many BD-Video movie contents are recorded in 24 frames/second in  accordance with the film materials. However, they will normally be output in 
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-qualit y video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS≥Connect to a TV supporting 1080/24p input via an HDMI cable.
NECESSARY SETTINGS≥“24p Output”: “On” ( >34)
Necessary settings for audio output
After connecting to the terminals, perform necessary settings.
≥For more information about settings, refer to page 33, 34.
≥ When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorr ect. 
In the following case, set “HDMI Audio Output” to “Off”. ( >34)
– When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television usin g HDMI AV 
OUT terminal
To return to the previous screenPress [RETURN].
To exit the screenPress [SETUP].
Audio output setting for the various equipment
Below is a table of recommended settings to output high quality audio to the connected equipment. When connecting to equipment  not listed below, 
change to your preferred  settings as necessary.
*1 HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*2 “PCM Down Conversion” is in effect  only when connected to an OPTICAL terminal. If the receiver supports 96 kHz sampling frequ ency, set to 
“Off”; if it does not support it, set to “On”.
“BD-Video  Secondary Audio”
“Dolby D/Dolby D +/ Dolby TrueHD”
“DTS/DTS-HD” 1) While stopped
Press [SETUP].
2) Press [ 3,4] to select “Audio” and press [OK].
3) Press [ 3,4] to select “Digital Audio Output” and press [OK].
4) Press [ 3,4 ] to select “Dolby D/Dolby D +/Dolby TrueHD”, “DTS/DTS-HD”, 
or “BD-Video Secondary Audio” and press [ 2,1 ] to select the option.
Example of connected equipment
TV via HDMI
Receiver via HDMI
Receiver via OPTICALReceiver has  HD 
audio*1 decoder & 
5.1ch speakersReceiver doesn’t have  
HD audio *1 decoder & 
5.1ch speakers
“Audio” (B 33)
“Digital Audio 
Output”
“Dolby D/Dolby D +/Dolby TrueHD” “PCM”
“Bitstream” “PCM”“PCM”
“DTS/DTS-HD” “PCM”“Bitstream” “PCM”“PCM”
“BD-Video 
Secondary Audio” “Off” “Off” “Off” “Off”
“PCM Down Conversion”
———
*2
“Downmix”“Stereo” “Surround encoded” “Surround encoded” “Surround encoded”
RETURN
AudioDynamic Range CompressionDigital Audio OutputPCM Down ConversionDownmix
OK
Off
OffStereo
Getting started
RQT9412~Body_mst.fm  9 ページ  ２００９年３月３日　火曜日　午前１１時２５分 
						

							RQT9412
10
Connections
About terminal
≥This unit offers several different  types of audio and video connections.
≥ Your TV/receiver/amplifier may or ma y not support all the connections shown.
Video Connections (TV) (>11)
Audio Connections (Receiver/Amplifier) ( >12, 13)
≥Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.
≥ Before making any connections we strongly suggest that  all units be temporarily disconnected from AC power.
≥ Do not connect video signals through a video recorder. Due to copy  guard protection the picture may not be displayed properly
Highest
Quality Standard
Quality
HDMI AV OUT480p, 720p, 1080i, 
1080pCOMPONENT VIDEO OUTBD-Video: 480i, 480p, 720p, 
1080i
DVD-Video, VHS: 480i, 480p VIDEO OUT480i
Highest
QualityStandard
Quality
HDMI AV OUT DIGITAL AUDIO OUT
AUDIO OUT
≥Non-HDMI-compliant cables cannot be utilized.
≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the cover). It is recommended that you 
use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft) or less.
Recommended part number: 
RP-CDHG10 (1.0 m/3.3 ft), RP-CDHG15 (1.5 m/4.9 ft.), RP-CDHG20 (2.0 m/6.6 ft), RP-CDHG30 (3.0 m/9.8 ft.), RP-CDHG50 
(5.0 m/16.4 ft.), etc.
≥This unit incorporates HDMI (Deep Color, x.v.Color
TM, High Bit rate Audio) technology. ( >50, 51)
DMP-BD70V-RQT9412_ENG.book  10 ページ  ２００９年２月２７日　金曜日　午後７時２３分