Home
>
Panasonic
>
Projector
>
Panasonic DLP Based Projector PT-DZ110XE PT-DS100XE PT-DW90XE Operating Instructions
Panasonic DLP Based Projector PT-DZ110XE PT-DS100XE PT-DW90XE Operating Instructions
Here you can view all the pages of manual Panasonic DLP Based Projector PT-DZ110XE PT-DS100XE PT-DW90XE Operating Instructions. The Panasonic manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Menu Navigation
ENGLISH - 51
Settings
MAIN MENU
The main menu consists of the following 11 menu
items.
When a main menu item is selected, the screen
changes to a sub-menu selection screen.
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
SUB MENU
The sub-menu screen of the selected main menu
appears, and you can set and adjust the various items
in the sub-menu.
PICTURE [
J ]
Sub-menu item
DefaultPage
PICTURE MODE...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-50.png "Page 51
Menu Navigation
ENGLISH - 51
Settings
MAIN MENU
The main menu consists of the following 11 menu
items.
When a main menu item is selected, the screen
changes to a sub-menu selection screen.
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
SUB MENU
The sub-menu screen of the selected main menu
appears, and you can set and adjust the various items
in the sub-menu.
PICTURE [
J ]
Sub-menu item
DefaultPage
PICTURE MODE...")
Menu Navigation ENGLISH - 51 Settings MAIN MENU The main menu consists of the following 11 menu items. When a main menu item is selected, the screen changes to a sub-menu selection screen. PICTURE POSITION ADVANCED MENU DISPLAY LANGUAGE DISPLAY OPTION PROJECTOR SETUP P IN P TEST PATTERN SIGNAL LIST SECURITY NETWORK SUB MENU The sub-menu screen of the selected main menu appears, and you can set and adjust the various items in the sub-menu. PICTURE [ J ] Sub-menu item DefaultPage PICTURE MODE...
Page 52
![Page 52
Menu Navigation
52 - ENGLISH
Settings
DISPLAY LANGUAGE [
J ]
Details (Æpage
68)
DISPLAY OPTION[
J ]
Sub-menu item
DefaultPage
COLOR MATCHING OFF69
LARGE SCREEN
CORRECTION OFF
70
SCREEN SETTING
*2— 70
WAVEFORM MONITOR
*4OFF 71
AUTO SIGNAL OFF72
AUTO SETUP —72
RGB IN —73
DVI-D IN —73
HDMI IN —74
SDI IN
*2— 74
ON-SCREEN DISPLAY —74
BACK COLOR BLUE75
STARTUP LOGO LOGO275
FREEZE —75
PROJECTOR SETUP[
J ]
Sub-menu item
DefaultPage
PROJECTOR ID ALL76
INSTALLATION FRONT/
FLOOR 76
HIGH ALTITUDE MODE...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-51.png "Page 52
Menu Navigation
52 - ENGLISH
Settings
DISPLAY LANGUAGE [
J ]
Details (Æpage
68)
DISPLAY OPTION[
J ]
Sub-menu item
DefaultPage
COLOR MATCHING OFF69
LARGE SCREEN
CORRECTION OFF
70
SCREEN SETTING
*2— 70
WAVEFORM MONITOR
*4OFF 71
AUTO SIGNAL OFF72
AUTO SETUP —72
RGB IN —73
DVI-D IN —73
HDMI IN —74
SDI IN
*2— 74
ON-SCREEN DISPLAY —74
BACK COLOR BLUE75
STARTUP LOGO LOGO275
FREEZE —75
PROJECTOR SETUP[
J ]
Sub-menu item
DefaultPage
PROJECTOR ID ALL76
INSTALLATION FRONT/
FLOOR 76
HIGH ALTITUDE MODE...")
Menu Navigation 52 - ENGLISH Settings DISPLAY LANGUAGE [ J ] Details (Æpage 68) DISPLAY OPTION[ J ] Sub-menu item DefaultPage COLOR MATCHING OFF69 LARGE SCREEN CORRECTION OFF 70 SCREEN SETTING *2— 70 WAVEFORM MONITOR *4OFF 71 AUTO SIGNAL OFF72 AUTO SETUP —72 RGB IN —73 DVI-D IN —73 HDMI IN —74 SDI IN *2— 74 ON-SCREEN DISPLAY —74 BACK COLOR BLUE75 STARTUP LOGO LOGO275 FREEZE —75 PROJECTOR SETUP[ J ] Sub-menu item DefaultPage PROJECTOR ID ALL76 INSTALLATION FRONT/ FLOOR 76 HIGH ALTITUDE MODE...
Page 53
![Page 53
PICTURE menu
ENGLISH - 53
Settings
PICTURE menu
See “Navigating through the menu”
z
(Æpage 50).
See “MAIN MENU” and “SUB MENU”
z
(Æpage 51).
PICTURE MODE
The user can switch to the desired picture mode
suitable for the image source and the environment in
which this projector is used.
Press ▲▼ to select [PICTURE MODE].
1 )
Press ◄► to switch [PICTURE MODE].
2 )
The setting will change as follows each time
z
◄► is pressed.
STANDARDCINEMANATURAL
USER DICOM SIM.
GRAPHICDYNAMIC
STANDARDThe...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-52.png "Page 53
PICTURE menu
ENGLISH - 53
Settings
PICTURE menu
See “Navigating through the menu”
z
(Æpage 50).
See “MAIN MENU” and “SUB MENU”
z
(Æpage 51).
PICTURE MODE
The user can switch to the desired picture mode
suitable for the image source and the environment in
which this projector is used.
Press ▲▼ to select [PICTURE MODE].
1 )
Press ◄► to switch [PICTURE MODE].
2 )
The setting will change as follows each time
z
◄► is pressed.
STANDARDCINEMANATURAL
USER DICOM SIM.
GRAPHICDYNAMIC
STANDARDThe...")
PICTURE menu ENGLISH - 53 Settings PICTURE menu See “Navigating through the menu” z (Æpage 50). See “MAIN MENU” and “SUB MENU” z (Æpage 51). PICTURE MODE The user can switch to the desired picture mode suitable for the image source and the environment in which this projector is used. Press ▲▼ to select [PICTURE MODE]. 1 ) Press ◄► to switch [PICTURE MODE]. 2 ) The setting will change as follows each time z ◄► is pressed. STANDARDCINEMANATURAL USER DICOM SIM. GRAPHICDYNAMIC STANDARDThe...
Page 54
![Page 54
PICTURE menu
54 - ENGLISH
Settings
CONTRAST
You can adjust the contrast of the projected image.
Press ▲▼ to select [CONTRAST].
1 )
Press ◄► or button.
2 )
The [CONTRAST] individual adjustment screen
z
will be displayed.
Press ◄► to adjust the level.
3 )
Operation AdjustmentAdjustment
range
Press ►. Raises the picture
brightness and the
picture becomes
clearer. Maximum
value 31
Press ◄. Lowers the picture
brightness and
weakens the picture. Minimum
value
-31
Attention
Adjust the...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-53.png "Page 54
PICTURE menu
54 - ENGLISH
Settings
CONTRAST
You can adjust the contrast of the projected image.
Press ▲▼ to select [CONTRAST].
1 )
Press ◄► or button.
2 )
The [CONTRAST] individual adjustment screen
z
will be displayed.
Press ◄► to adjust the level.
3 )
Operation AdjustmentAdjustment
range
Press ►. Raises the picture
brightness and the
picture becomes
clearer. Maximum
value 31
Press ◄. Lowers the picture
brightness and
weakens the picture. Minimum
value
-31
Attention
Adjust the...")
PICTURE menu 54 - ENGLISH Settings CONTRAST You can adjust the contrast of the projected image. Press ▲▼ to select [CONTRAST]. 1 ) Press ◄► or button. 2 ) The [CONTRAST] individual adjustment screen z will be displayed. Press ◄► to adjust the level. 3 ) Operation AdjustmentAdjustment range Press ►. Raises the picture brightness and the picture becomes clearer. Maximum value 31 Press ◄. Lowers the picture brightness and weakens the picture. Minimum value -31 Attention Adjust the...
Page 55
![Page 55
PICTURE menu
ENGLISH - 55
Settings
COLOR TEMPERATURE
You can adjust the white balance of the projected
image.
Press ▲▼ to select [COLOR
1 )
TEMPERATURE].
Press ◄► or button.
2 )
The [COLOR TEMPERATURE] individual
z
adjustment screen will be displayed.
Press ◄► to switch [COLOR
3 )
TEMPERATURE].
The setting will change as follows each time
z
◄► is pressed.
DEFAULT ÛUSER1USER2
9300K 3200K
[DEFAULT] cannot be selected when the
:
Û
[PICTRUE MODE] has been set to [USER] or
[DICOM SIM.].
Note...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-54.png "Page 55
PICTURE menu
ENGLISH - 55
Settings
COLOR TEMPERATURE
You can adjust the white balance of the projected
image.
Press ▲▼ to select [COLOR
1 )
TEMPERATURE].
Press ◄► or button.
2 )
The [COLOR TEMPERATURE] individual
z
adjustment screen will be displayed.
Press ◄► to switch [COLOR
3 )
TEMPERATURE].
The setting will change as follows each time
z
◄► is pressed.
DEFAULT ÛUSER1USER2
9300K 3200K
[DEFAULT] cannot be selected when the
:
Û
[PICTRUE MODE] has been set to [USER] or
[DICOM SIM.].
Note...")
PICTURE menu ENGLISH - 55 Settings COLOR TEMPERATURE You can adjust the white balance of the projected image. Press ▲▼ to select [COLOR 1 ) TEMPERATURE]. Press ◄► or button. 2 ) The [COLOR TEMPERATURE] individual z adjustment screen will be displayed. Press ◄► to switch [COLOR 3 ) TEMPERATURE]. The setting will change as follows each time z ◄► is pressed. DEFAULT ÛUSER1USER2 9300K 3200K [DEFAULT] cannot be selected when the : Û [PICTRUE MODE] has been set to [USER] or [DICOM SIM.]. Note...
Page 56
![Page 56
PICTURE menu
56 - ENGLISH
Settings
Press ▲▼◄► to select characters
5 )
and press button to input
them.
Press ▲▼◄► to select [OK], and
6.
press button.
The color temperature setting name is changed.
z
GAMMA
This switches the gamma mode.
Press ▲▼ to select [GAMMA].
1 )
Press ◄► or button.
2 )
The [GAMMA] individual adjustment screen will
z
be displayed.
Press ◄► to switch [GAMMA].
3 )
The setting will change as follows each time
z
◄► is pressed.
DEFAULT *USER1
2.8 USER2
DICOM SIM.
1.0...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-55.png "Page 56
PICTURE menu
56 - ENGLISH
Settings
Press ▲▼◄► to select characters
5 )
and press button to input
them.
Press ▲▼◄► to select [OK], and
6.
press button.
The color temperature setting name is changed.
z
GAMMA
This switches the gamma mode.
Press ▲▼ to select [GAMMA].
1 )
Press ◄► or button.
2 )
The [GAMMA] individual adjustment screen will
z
be displayed.
Press ◄► to switch [GAMMA].
3 )
The setting will change as follows each time
z
◄► is pressed.
DEFAULT *USER1
2.8 USER2
DICOM SIM.
1.0...")
PICTURE menu 56 - ENGLISH Settings Press ▲▼◄► to select characters 5 ) and press button to input them. Press ▲▼◄► to select [OK], and 6. press button. The color temperature setting name is changed. z GAMMA This switches the gamma mode. Press ▲▼ to select [GAMMA]. 1 ) Press ◄► or button. 2 ) The [GAMMA] individual adjustment screen will z be displayed. Press ◄► to switch [GAMMA]. 3 ) The setting will change as follows each time z ◄► is pressed. DEFAULT *USER1 2.8 USER2 DICOM SIM. 1.0...
Page 57
![Page 57
PICTURE menu
ENGLISH - 57
Settings
SHARPNESS
This adjusts the sharpness of the pictures.
Press ▲▼ to select [SHARPNESS].
1 )
Press ◄► or button.
2 )
The [SHARPNESS] individual adjustment
z
screen will be displayed.
Press ◄► to adjust the level.
3 )
Operation AdjustmentAdjustment
range
Press ►. Contours become
sharper.
0 - 15
Press ◄. Contours become
softer.
NOISE REDUCTION
This can be used to adjust pictures if they contain
interference as a result of poor quality of the input
signal.
Press...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-56.png "Page 57
PICTURE menu
ENGLISH - 57
Settings
SHARPNESS
This adjusts the sharpness of the pictures.
Press ▲▼ to select [SHARPNESS].
1 )
Press ◄► or button.
2 )
The [SHARPNESS] individual adjustment
z
screen will be displayed.
Press ◄► to adjust the level.
3 )
Operation AdjustmentAdjustment
range
Press ►. Contours become
sharper.
0 - 15
Press ◄. Contours become
softer.
NOISE REDUCTION
This can be used to adjust pictures if they contain
interference as a result of poor quality of the input
signal.
Press...")
PICTURE menu ENGLISH - 57 Settings SHARPNESS This adjusts the sharpness of the pictures. Press ▲▼ to select [SHARPNESS]. 1 ) Press ◄► or button. 2 ) The [SHARPNESS] individual adjustment z screen will be displayed. Press ◄► to adjust the level. 3 ) Operation AdjustmentAdjustment range Press ►. Contours become sharper. 0 - 15 Press ◄. Contours become softer. NOISE REDUCTION This can be used to adjust pictures if they contain interference as a result of poor quality of the input signal. Press...
Page 58
![Page 58
PICTURE menu
58 - ENGLISH
Settings
SYSTEM SELECTOR
This enables the projector to automatically recognize
input signals. Furthermore, if unstable signals are
input, the system format can be selected manually.
Press ▲▼ to select [SYSTEM
1 )
SELECTOR].
Press button.
2 )
Press ▲▼ to switch [SYSTEM
3 )
SELECTOR].
Press button.
4 )
VIDEO/S-VIDEO terminal input
J
signal
Select from AUTO, NTSC, NTSC4.43, PAL,
PAL-M, PAL-N, SECAM, and PAL60.
Attention
[AUTO] mode is selected by default.
z
When...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-57.png "Page 58
PICTURE menu
58 - ENGLISH
Settings
SYSTEM SELECTOR
This enables the projector to automatically recognize
input signals. Furthermore, if unstable signals are
input, the system format can be selected manually.
Press ▲▼ to select [SYSTEM
1 )
SELECTOR].
Press button.
2 )
Press ▲▼ to switch [SYSTEM
3 )
SELECTOR].
Press button.
4 )
VIDEO/S-VIDEO terminal input
J
signal
Select from AUTO, NTSC, NTSC4.43, PAL,
PAL-M, PAL-N, SECAM, and PAL60.
Attention
[AUTO] mode is selected by default.
z
When...")
PICTURE menu 58 - ENGLISH Settings SYSTEM SELECTOR This enables the projector to automatically recognize input signals. Furthermore, if unstable signals are input, the system format can be selected manually. Press ▲▼ to select [SYSTEM 1 ) SELECTOR]. Press button. 2 ) Press ▲▼ to switch [SYSTEM 3 ) SELECTOR]. Press button. 4 ) VIDEO/S-VIDEO terminal input J signal Select from AUTO, NTSC, NTSC4.43, PAL, PAL-M, PAL-N, SECAM, and PAL60. Attention [AUTO] mode is selected by default. z When...
Page 59
![Page 59
POSITION menu
ENGLISH - 59
Settings
POSITION menu
See “Navigating through the menu”
z
(Æpage 50).
See “MAIN MENU” and “SUB MENU”
z
(Æpage 51).
SHIFT
This function allows the user to adjust the raster
position vertically or horizontally if the position of the
image projected on the screen is displaced even
when the projector is properly aligned with the screen,
and the internal test patterns are correctly framed.
Press ▲▼ to select [SHIFT].
1 )
Press button.
2 )
The [SHIFT] screen will...](http://img.usermanuals.tech/thumb/58/75770/w300_pt-dz110_en_om_d-58.png "Page 59
POSITION menu
ENGLISH - 59
Settings
POSITION menu
See “Navigating through the menu”
z
(Æpage 50).
See “MAIN MENU” and “SUB MENU”
z
(Æpage 51).
SHIFT
This function allows the user to adjust the raster
position vertically or horizontally if the position of the
image projected on the screen is displaced even
when the projector is properly aligned with the screen,
and the internal test patterns are correctly framed.
Press ▲▼ to select [SHIFT].
1 )
Press button.
2 )
The [SHIFT] screen will...")
POSITION menu ENGLISH - 59 Settings POSITION menu See “Navigating through the menu” z (Æpage 50). See “MAIN MENU” and “SUB MENU” z (Æpage 51). SHIFT This function allows the user to adjust the raster position vertically or horizontally if the position of the image projected on the screen is displaced even when the projector is properly aligned with the screen, and the internal test patterns are correctly framed. Press ▲▼ to select [SHIFT]. 1 ) Press button. 2 ) The [SHIFT] screen will...
Page 60
POSITION menu 60 - ENGLISH Settings VID AUTO (PRI.) J The projector identifies the abovementioned VID or S1 signals and displays the picture by automatically choosing the screen sizes of 4 : 3 or 16 : 9 according to the VID if it is detected or S1 signals if a VID is not detected. This function is effective for S-Video NTSC signals. THROUGH J Pictures are displayed without changing the resolution of the input signals. 16 : 9 J When standard signals *4 are input, the pictures are displayed with...