Panasonic DLP Based Projector PT-DZ110XE PT-DS100XE PT-DW90XE Operating Instructions

SIGNAL LIST menu
ENGLISH - 91
Settings
Managing the sub memory 
list
You can restore the sub memory data when using 
signals from the same input source. Sub memory data 
contains the setting information of screen and image 
adjustments, such as BRIGHTNESS, CONTRAST or 
ASPECT.
Registering the current settings  
J
to the list
In the normal screen (when the menu 
1  ) 
is not displayed), press ◄► button.
The signal must be registered before creating a  
z
sub memory data of the signal.
Displays the list of...

SECURITY menu
92 - ENGLISH
Settings
SECURITY menu
See “Navigating through the menu”   
z
(Æpage  50).
See “MAIN MENU” and “SUB MENU”   
 
z
(Æpage  51).
When you apply to the [SECURITY] menu 
 
z
before you change the password to your original, 
perform to input the following factory default 
password operation.
Press ▲►▼◄▲►▼◄  and  button.
Attention
When you apply to the SECURITY menu after you 
 
z
change the password to your original in the [SECURITY 
PASSWORD CHANGE] menu, input the original...

SECURITY menu
ENGLISH - 93
Settings
DISPLAY SETTING
You can set your original text, such as company 
name or URL information, to display regularly on the 
projected image while projecting.
Press ▲▼ to select [DISPLAY 
1  ) 
SETTING].
Press ◄► to switch [DISPLAY 
2  ) 
SETTING].
The setting will change as follows each time  
z
◄► is pressed.
OFFTEXTLOGO1
OFF The text display is disabled.
TEXT The text display is enabled.
LOGO1 The picture registered by the user 
will be projected.
Note
Separate software...

SECURITY menu
94 - ENGLISH
Settings
CONTROL DEVICE SETUP
Control from the remote control and main unit controls 
can be restricted.
Press ▲▼ to select [CONTROL 
1  ) 
DEVICE SETUP].
Press  button.
2  ) 
The [CONTROL DEVICE SETUP] screen will  
z
be displayed.
Press ▲▼ to select [CONTROL 
3  ) 
PANEL] or [REMOTE CONTROLLER].
Press  button.
4  ) 
[ 
zCONTROL PANEL] screen or [REMOTE 
CONTROLLER] screen will be displayed.
 
JCONTROL PANEL
Restriction of control from the main unit controls  
z
can be set....

NETWORK menu
ENGLISH - 95
Settings
NETWORK menu
See “Navigating through the menu”   
z
(Æpage  50).
See “MAIN MENU” and “SUB MENU”   
 
z
(Æpage  51).
NETWORK SETUP
Make the initial network settings before using the 
network connection.
Press ▲▼ to select [NETWORK 
1  ) 
SETUP].
Press  button.
2  ) 
The [NETWORK SETUP] screen will be  
z
displayed.
Press ▲▼ to select an item, and 
3  ) 
change the setting according to the 
instructions.
PROJECTOR  
NAME
(Display of host 
name and setting)
Change as...

NETWORK menu
96 - ENGLISH
Settings
Network connections
The projector is equipped with network functions, and web browser contro\
ls can be used to carry out the following 
operations from a computer.Projector settings and adjustments
 
z
Projector status display 
z
Transmission of E-mail messages if there is a problem with the projector 
z
Note
A LAN cable is required to use the network function.
 
z
A Web browser is required to use this function. Make sure that a Web browser is available in the system....

NETWORK menu
ENGLISH - 97
Settings
Accessing from the Web browser
Activate the Web browser in the personal computer.
1  ) 
Enter the IP address set by the projector into the URL input field of the Web browser.
2  ) 
Enter your “User name” and “Password”.
3  ) 
The factory default settings are user1 (user privileges) or admin1 (a\
dministrator privileges) for the user  
z
name and panasonic (lowercase letters) for the password.
Click [OK] to display the Projector status page.
4  ) 
Note
Avoid activating...

NETWORK menu
98 - ENGLISH
Settings
Change Password page 
J
Click [Change password].
 
Administrator
 User
Administrator mode 
Q
Administrator account 
z
  Account
 Current user name input field
  Current password input field
 New user name input field
 New password input field
 New password input field  
(re-enter for confirmation)
  Button for executing password change
User account
 
z
  Account
 New user name input field
  New password input field
 New password input field  
(re-enter for...

NETWORK menu
ENGLISH - 99
Settings
Basic control page 
J
To move from another page, click [Projector control], then [Basic control\
].
 
Page selection tabs
  Click these to switch pages.
 This displays the on-screen status. It is displayed 
even if the on-screen display of the projector is 
set to off.
  Monitor information button
  Click this item, and the status of the projector is 
displayed.
 Detailed set up button
  Click this item to display the advanced settings 
page.
 Change password button...

NETWORK menu
100 - ENGLISH
Settings
Detail control page 
J
Click [Projector control], then [Detail control] to display the Detail c\
ontrol page.
 
Pressing these buttons controls the projector and 
updates the on-screen description on the right of 
the control page when control is finished.
 Lens adjustment
  Test pattern display
 This button updates the on-screen description 
on the right of the control page with the latest 
information.
 Menu display
Projector status page 
J
Click [Status], then...