Panasonic DLP Based Projector PT-DZ110XE PT-DS100XE PT-DW90XE Operating Instructions

DISPLAY OPTION menu
ENGLISH - 71
Settings
Press ◄► to adjust [SCREEN 
4  ) 
POSITION].
In the case of the PT-DZ110XE :   
z
When [SCREEN FORMAT] is [16 : 9]   
Adjustment range: 
-60 to +60
When [SCREEN FORMAT] is [4 : 3]   
Adjustment range: 
-160 to +160
In the case of the PT-DS100XE, you can adjust 
 
z
the setting from -132 to +131.
Note
[SCREEN POSITION] cannot be adjusted when 
 
z
[SCREEN FORMAT] is [16 : 10] (PT-DZ110XE) or [4 : 3] 
(PT-DS100XE).
WAVEFORM MONITOR  
(PT-DZ110XE only)
This function...

DISPLAY OPTION menu
72 - ENGLISH
Settings
Adjust the light portion of RED.
4  ) 
In [RED] of [WHITE BALANCE HIGH], adjust  
z
the 100 % of the white level of the image signal 
to the position corresponding to 100 % on the 
waveform monitor. (
Æpage  55)
Adjust [GREEN] and [BLUE] in a 
5  ) 
similar manner.
Note
When the DVI-D signal, HDMI signal, or SDI signal is 
 
z
inputted, check that the [DVI SIGNAL LEVEL], [HDMI 
SIGNAL LEVEL], and [SDI SIGNAL LEVEL] are correctly 
set before adjusting the black...

DISPLAY OPTION menu
ENGLISH - 73
Settings
Adjusting the position  
J
automatically
Select [POSITION ADJUST] in step 3).
1. 
Press ◄► to switch [POSITION 
2. 
ADJUST].
The setting will change as follows each time  
z
◄► is pressed.
OFFON
OFF Automatic adjustment is off.
ON Screen position and size are 
adjusted during AUTO SETUP 
operation.
Adjusting the signal level  
J
automatically
Select [SIGNAL LEVEL ADJUST] in 
1. 
step 3).
Press ◄► to switch [SIGNAL LEVEL 
2. 
ADJUST].
The setting will change as...

DISPLAY OPTION menu
74 - ENGLISH
Settings
Press ◄► to switch [DVI SIGNAL 
6  ) 
LEVEL].
The setting will change as follows each time  
z
◄► is pressed.
0-255 : PC16-235
0-255 : PC Select this when, for example, 
an external device (PC, etc.) is 
connected via the DVI terminal 
output.
16-235 Select this when, for example, an 
external device (DVD player, etc.) 
is connected via the HDMI terminal 
output using a conversion cable.
Note
The optimal setting differs depending on the output 
 
z
setting of the...

DISPLAY OPTION menu
ENGLISH - 75
Settings
OSD DESIGN 
J
This sets the color of the on-screen display (OSD).
1 : Yellow2 : Blue
6 : Brown
3 : White
5 : Pink4 : Green
OSD MEMORY 
J
The current menu cursor position will be retained 
temporarily unless the projector switched off.
ONOFF
INPUT GUIDE 
J
This sets whether to display the currently 
selected input guide at the position set for [OSD 
POSITION].
ONOFF
WARNING MESSAGE 
J
This sets the display of warning messages.
ONOFF
BACK COLOR
This sets the color...

PROJECTOR SETUP menu
76 - ENGLISH
Settings
PROJECTOR SETUP menu
See “Navigating through the menu”   
z
(Æpage  50).
See “MAIN MENU” and “SUB MENU”   
 
z
(Æpage  51).
PROJECTOR ID
The projector has an ID number setting function that 
helps the user to control two or more projectors either 
simultaneously or separately with a single remote 
control.
Press ▲▼ to select [PROJECTOR ID].
1  ) 
Press ◄► to switch [PROJECTOR ID].
2  ) 
The setting will change as follows each time  
z
◄► is pressed.
ALL1
64 2...

PROJECTOR SETUP menu
ENGLISH - 77
Settings
COOLING CONDITION
You can control the fan speed for projecting 
angle. When the projector is angled, [COOLING 
CONDITION] setting must be set correctly. Failure to 
observe this may result in malfunctions, or the life of 
the lamp or the other components may be shortened.
Press ▲▼ to select [COOLING 
1  ) 
CONDITION].
Press  button.
2  ) 
The [COOLING CONDITION] screen will be  
z
displayed.
Press ▲▼ to select cooling condition.
3  ) 
Press  button.
4  ) 
When...

PROJECTOR SETUP menu
78 - ENGLISH
Settings
Note
Only when [DUAL] or [SINGLE] is selected in [LAMP 
 
z
SELECT], [LAMP RELAY] is available
If [DUAL] is selected in [LAMP SELECT], only one lamp 
 
z
is turned on for four hours after the set time.
The setting time will be the local time.   
 
z
(
Æpage  85)
The time can be input directly using the numeral keys on 
 
z
the remote control.
If the filter is running low, only one lamp will light even 
 
z
when [DUAL] is selected. The lamps will light as normal...

PROJECTOR SETUP menu
ENGLISH - 79
Settings
When [MODE] is set to [AUTO] 
Q
Press ▲▼ to select [LINK].
5  ) 
Press ◄► to switch [LINK].
6  ) 
The setting will change as follows each time  
z
◄► is pressed.
OFFGROUP A
GROUP DGROUP CGROUP B
OFF Brightness is corrected using the 
brightness sensor of one of the 
projectors, without linking with other 
projectors.
A smaller [BRIGHTNESS CONTROL 
GAIN] value means the constant 
brightness can be maintained for longer.
GROUP   A - D Brightness is corrected using...

PROJECTOR SETUP menu
80 - ENGLISH
Settings
When [MODE] of brightness control is  
Q
[OFF]
The state that the brightness control is OFF is 
displayed.
 
The name of this projector is displayed.
When [MODE] of brightness control is  
Q
[AUTO] and [LINK] is [OFF]
The state that the LINK is OFF is displayed.
 
The name of this projector is displayed.
 The state is indicated by color.
GREEN :    The brightness can be corrected by a 
significant margin.
YELLOW :    The brightness can no longer be 
corrected by...