Panasonic Digital Imaging Systems For Copy And Network Scan Functions Dp 8032 Operating Instructions

							
61
Making Copies
Paper Size∗
Paper Tray
Presentation mode
Blank Copy
Load OHP
film onto
the Sheet
Bypass
NOTE∗The size and orientation of the printed copy, and recording paper should match.
∗∗Blank page to be inserted before the indicated selected page number.
3
Number of
Copies
for handouts
(Max. 999)
54
Density for 1st page imageNumber of
Copies
(Max. 999)
or
From Platen:
Same procedures
as for Form Overlay
34
Select a fileNumber of Copies
(Max. 999)
From Platen:
If “
Another Original? ” message is
displayed, touch the “ NO” button.
Ex:  2 originals
Touch  NO button.
Place the next original on the
Platen.
3Press  START  Key.
4Touch  YES button.
34
5
6
Select a fileEnter the file name
7
(Up to 20 characters) 
						

							
62
Making Copies
Insertion/Overlay
■
■ ■
■
■  File Edit
Up to three ∗
 editing functions available in the
File Edit feature.
∗ : To Add a new file ∗
∗
: To Erase a registered file
∗: To Change the title of a fileor
(Register only)
Density for
registered image
REGISTER
or
ERASE
FILE NAME
EDIT
Enter the file name
NOTE●
The File Edit function for selecting a file is only available when the optional HDD (DA-HD31),
and Image Memory (See page 93) is installed.
When the optional HDD (DA-HD31) is not installed, only one file can be selected.
● When an overlay image is not stored in memory, File Edit function is not selectable.
∗One image file can be registered.
With the optional HDD (DA-HD31)
installed, up to 5 image files can be
registered.
If the selected File Key already contains a
registered file image, the new image will
overwrite the current image. ∗∗∗∗Without the optional HDD
(DA-HD31) installed:
After pressing the 
FILE
EDIT  button, the machine
skips Step 3, and proceeds
to Step 4 (Erase Mode).
12
4
4
4 
						

							
63
Making Copies
Select a file
To cancel the registration,
touch CANCEL  button.
3
67
5
4
File Name
85
Select a file 
						

							
64
Making Copies
Other Features
■
■ ■
■
■  Job Memory
Five Copy Jobs can be stored in Memory
(M1 to M5) for recall at a later time.To store a job in memory
M1, M2, M3, M4, M5
Set up the copy job
to be stored.
NOTE●
JOB MEMORY mode will not be deleted even if the power switches are turned Off.
● When storing a new job into a programmed memory location, the previously\
 stored job will be
overwritten and erased.
● M1, M2 can use as manual skyshot mode by setting the user function mode.\
■
■ ■
■
■  Double Exposure
From 2-Sided originals to 1-Sided 2 in 1
copies (side-by-side image).  ∗1
 Front Side of Original
 Original Size:
Free, maximum Invoice size
 Opening the ADF
 Fit original to the Original
Guide.
Back Side
of Original
NOTE:
When opening the Platen Cover, or ADF
● An incorrect position detection of the
original may occur when a strong light
shines on the glass during this mode.
● An incorrect exposure may occur when
there is a Black line at the edge of the
original, or an image which the machine
interprets as a Black Pattern in this mode.
● The final copy may be affected if colored
background original(s) do not have a
White edge, or if it is less than 2 mm wide.
∗1 When selecting the Double Exposure,  it
will be displayed as   2 in 1 at  Job
Settings, and  N in 1 of Function Select
Key will also be displayed.
∗2 Double Exposure function set by M5 key is unable to store with other Job Memory.
Original Size:
ABCABC
DEF
NOTE:
When the M5 Key is used, the Double
Exposure Mode should be set to  Off in the
Copier Settings  16 Double Exposure . (See
page 75)
Original Guide ∗2
Front Side
Image
Back Side
Image
Copy Size: Letter-R
Ex:  Invoice-R
12
12
56 
						

							
65
Making Copies
To recall a job stored in memory
M1, M2, M3, M4, M5
or
Number of Copies
(Max. 999)
Number of Copies
(Max. 999)
NOTE
If “2: NO ” is selected, the
machine will start copying
only scanned original.
The following steps, illustrate how to
make multiple copies when the Sort
Mode is selected. (See page 48)
1:  YES Continues to copy another original, repeat steps 1,
and 3-
 2  to step 6.
2:  NO Starts making copies.
 When you select the Non Sort Mode this step is not used.
NOTE● When using the double exposure mode, the M5 is turned On, and other job \
requiring memory
cannot be used.
● The default setting of Double Exposure Mode is  ON in the Copier Settings  16 Double
Exposure . If this setting is changed to “ OFF”, this mode cannot be used.
123
34
5
7 
						

							
66
Making Copies
Other Features
■
■ ■
■
■  Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional HDD (DA-HD31), and
Image Memory (See page 93) to be installed)
1st job1st job
2nd job
Reserve
Copy
2nd job
1st job
or
Select Function
■
■ ■
■
■  Skyshot Mode
Skyshot allows copying a manuscript without
generating dark borders even if the Platen Cover,
or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode  : The scanning area (size)
is not pre-determined.
Manual Skyshot Mode : The scanning area (size)
is pre-registered into
memory (M1 and M2) in
advance.Digital Skyshot Mode
NORMAL
Default setting (usually select this mode).
QUALITY ∗
∗ ∗
∗
∗
For better definition, select the Quality mode.
The default setting of Digital Skyshot Mode is “ NORMAL”. In
this setting, the unit scans once.
If there are Black areas around the borders in the copies, set
the Digital Skyshot Mode to “ QUALITY” to soften the dark
borders. In this setting, the unit scans twice. (See page 74)
Manual Skyshot Mode
● Set “ 09 Manual Skyshot Mode ” in Copier Settings first. (See
page 74)
NOTE∗When copying the Quality mode combined with  1  2, BOOK  2, 2PAGE, N in 1, or
Double Exposure, “ Quality” mode will be changed to “ Normal” mode.
● An incorrect exposure may occur when there is a Black line at the edge o\
f the original, or an
image which the copier interprets as a Black Pattern in the skyshot mode\
.
12 
						

							
67
Making Copies
Scanning is completed
or
Select
Function
Job Waiting List can be
confirmed with Job Queue.
(See page 38)
Number of Copies
(Max. 999)
Number of Copies
(Max. 999)
∗Default M1/M2 size can be changed
by Function mode. (See page 82)
PlatenUpper-
Left
Corner
Custom size ∗
NOTE●
If using ADF, place originals in the center position of ADF Tray. The ADF can feed only 14 - 28
lb plain paper.
● When using the manual skyshot mode, the M1 and M2 are turned On, and oth\
er job requiring
memory cannot be used.
● An incorrect position detection of the original may occur when a strong \
light shines onto the
glass during skyshot mode.
2
123
3456
Platen
Upper-
Left
Corner
1 
						

							
68
Making Copies
Other Features
■
■ ■
■
■  Energy Saver (Power Save Mode, Sleep/Shutdown Mode)
This mode can interrupt other copy jobs while
making copies.
or
Set another Job
These modes save power while the copier is
not in use.
Power Save Mode
∗
∗ ∗
∗
∗
Enter
Sleep/Shutdown Mode ∗∗
∗∗ ∗∗
∗∗
∗∗
Automatically enters the
Sleep/Shutdown Mode
after 15 minutes from the
last copy job.
or
Indicator
Flash : Power Save Mode
Light : Sleep/Shutdown Mode
NOTE∗Automatically enters the Power Save Mode after 7 minutes from the last c\
opy job.
(See page 77)
∗∗Sleep Mode/Shutdown Mode, and entering timer can be selected by the key operator.
(See page 77)
■
■ ■
■
■  Interrupt Mode
1
12While making copy 
						

							
69
Making Copies
Other Job is
completed
To clear
Modes Power Consumption Warm Up Time
Normal Operation Approx. 140 Wh N/A
Power Save Approx. 28 Wh Approx. 30 sec.
Sleep Approx. 18 Wh 35 sec.
Shutdown Approx. 3 Wh 35 sec.
The machine will not go into Sleep/Shutdown Mode when the Weekly
Timer is selected.
2
345 
						

							
70
Network Scanner
■
■ ■
■
■  Registering your PC
When the Panasonic Document
Management System is
installed on the provided CD-
ROM, start the Panasonic
Communication Utility, and
register your PC by setting the
network scanner.
Registering your PC/Document Scanning
12
■
■ ■
■
■  Document Scanning
When the Panasonic Document
Management System is
installed, and configured  on
your PC, document(s) can be
scanned from  the DP-8032/
8025 to the PC.
When using the network
scanner, the Panasonic
Communication Utility software
on your PC must be initiated.
or
12
Original Size
If the original size is not
shown
5
 Right-click on the icon.
 Select  Scanner
Configuration....
Select “ Auto Registration ”.
Set the PC, and Key Name to be
saved on the machine.
When the DP-8032/8025 is installed
on a different subnet mask ∗
 of the
network (LAN), Select  Add Device
then, register the machine by
following the steps below.
3Click  OK.