Panasonic Digital Imaging Systems For Copy And Network Scan Functions Dp 8032 Operating Instructions

							
51
Making Copies
or
Same vertical, and
horizontal ratio
25% - 400%
or
or Keypad Different vertical, and
horizontal ratio
25% - 400%
or
or Keypad
or
Number
of Copies
Number
of CopiesFit to paper length, or
width
Fit to paper length,
and width
Paper Size
(Paper Tray)
or
Same vertical, and
horizontal void value
5 - 99 mm
or
or Keypad Different vertical, and
horizontal void value
5 - 99 mm
or
or Keypad
or
Number
of Copies
34
354
NOTE●
Zoom Ratio
If using the keypad to set the zoom ratio,  press the  CLEAR key first to reset the current zoom
ratio.
34 
						

							
52
Making Copies
Zoom/Effects
■
■ ■
■
■  Book
Eliminates dark inner binding shadows.
PlatenLedger
Letter
Ledger
12
■
■ ■
■
■  Margin
Shifts image to right, left, up, or down.
or
12
■
■ ■
■
■  Centering
Copy image can be centered automatically
on selected paper.
Opening the ADF
12
NOTE● In Centering mode, make copies with the ADF open.
● Remove the originals from the ADF before selecting the Centering mode.
An incorrect position detection of the original may occur when a strong \
light shines onto the
glass during the Centering mode.
Also an image which the copier interprets as a Black Pattern in the Cent\
ering mode. 
						

							
53
Making Copies
Number
of Copies5 - 99 mm
or
or Keypad
34
or
Number
of Copies
or Keypad
Margin area 5 - 99 mm
If a part of the copied image
is missing when using the
Margin mode, change the
Margin Reduction setting to
“YES”
. (See page 74)
34
Number
of CopiesPaper Size
(Paper Tray)
34 
						

							
54
Making Copies
Zoom/Effects
■
■ ■
■
■  Image Repeat
Creates continuous copy image on one
sheet.
Minimum original size: 20 x 20 mm
Opening the ADF
The dotted line can be set to
“None ” or “Print ” by Function
mode
(See page 75).
■
■ ■
■
■  Inverse
Negative/Positive image can be created for
special effects.
or
NOTE● In Image Repeat mode, make copies with the ADF open.
● Remove the originals from the ADF before selecting the Image Repeat mode.
An incorrect position detection of the original may occur when a strong \
light shines onto the
glass during the Image Repeat mode.
Also an image which the copier interprets as a Black Pattern in the Imag\
e Repeat mode.
12
12
■
■ ■
■
■  Stamping (Page Numbering)
Page numbers can be automatically
stamped on each page.
1/8-1-ADF only ∗
The page numbering
format can be changed
in function mode.
Default format is -n-.
(See page 75)
12 
						

							
55
Making Copies
Number
of CopiesPaper Size
(Paper Tray)
Number
of Copies
34
3
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
or
Stamping start page
From 1, 2, or 3
From 3rd page
From 2nd page
From 1st page
34
NOTE∗When copying with the Stamping mode combined with N in 1 mode, the Stamp\
ing mode can be
used from the Platen as well. 
						

							
56
Making Copies
Zoom/Effects
■
■ ■
■
■  Stamping (Date Stamp)
The date can be automatically stamped on
each page.
07/01/2008
■
■ ■
■
■  Stamping (Issue Number Stamping)
An issue number can be automatically
stamped on each page.
001
NOTE∗When copying with the Stamping mode combined with N in 1 mode, the Stamp\
ing mode can be
used from the Platen as well.
ADF only ∗
12
ADF only
∗
12 
						

							
57
Making Copies
Number of Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
Changing the stamp date
or
Number of
Copies
(Max. 999)
●Multiple copy sets will be
sorted automatically.
ORIENTATION
Stamping position
Stamping the Issue Numberor
or
Keypad
34
34 
						

							
58
Making Copies
Insertion/Overlay
OHP2
21
+
OHP(2)OHP2OHP(1)(2)(1)21
+
OHP1
OHP1
+
+
Insertion Insertion
■
■ ■
■
■  Cover
Adds Cover Page(s) to copies.
Blank cover
Copied cover
2
211+
3243+4
121
Original Blank
page
Original Copied page Copied
page
ADF only
■
■ ■
■
■  Page Insertion
Inserts Blank/Copied pages between copies.
Blank page
Copied page
Original Blank
page
Original Copied page
ADF only
■
■ ■
■
■  OHP Interleaving
Inserts Blank/Copied pages between OHP
film.
Blank page
Copied page
Original Blank
page
Original Copied page
ADF only
12
12
12
NOTE●Certain types of transparency film may not be compatible, and may damage\
 your machine.
Consult with an authorized Panasonic dealer for advice regarding non-sta\
ndard paper types.
(Panasonic has tested  3M PP2500 transparency film, and found it to b\
e compatible.) 
						

							
59
Making Copies
Paper Size∗
Paper Tray
Cover Page mode
Cover (Front)
Cover (Front+Back)
Blank Copy
Number of Copies
(Max. 999)
Paper Size
∗
Paper Tray
Page Insertion mode
Blank Copy
Number of
Copies
(Max. 999)
Paper Size ∗
Paper Tray
OHP Interleaving mode
Blank Copy
Set the insert page position with
Keypad∗∗
If selecting another position, move
the sheet with 
 /  button,
then set the insert page position
with Keypad
Load OHP film onto
the Sheet Bypass Blank Copy
34
34
3
5
Number of
Copies
(Max. 999)
5
NOTE∗The size and orientation of the printed copy, and recording paper should match.
∗∗Blank page to be inserted before the indicated selected page number.
4 
						

							
60
Making Copies
Insertion/Overlay
OHP2
21
+(2)(1)
+
OHP(2)OHP2OHP(1)(2)(1)21
+(2)(1)
+
OHP1
OHP1
■
■ ■
■
■  Presentation
Inserts Blank/Copied pages between OHP
film, and make copied sets for handouts.
Blank
page
Copied
page
Original Blank
page
Original Copied
page
ADF only
Hand-
outs
Hand-
outs
NOTE●Certain types of transparency film may not be compatible, and may damage\
 your machine.
Consult with an authorized Panasonic dealer for advice regarding non-sta\
ndard paper types.
(Panasonic has tested  3M PP2500 transparency film, and found it to b\
e compatible.)
● When an overlay image is not stored in memory, Form Overlay function is not selectable.
12
■
■ ■
■
■  Overlay
Overlays a first image onto the second by using
the first original.
1st-page
or
12
■
■ ■
■
■  Form Overlay
Overlay an image stored in memory onto the
copy.
or
File
12
Select the overlay
image to store into
memory for later use.
or
5
● When HDD is installed,
step 3 appear. ●
When optional HDD
(DA-HD31) is installed, and
[Yes] is selected, step 6
and 7 appear.