Panasonic Digital Imaging Systems For Copy And Network Scan Functions Dp 8032 Operating Instructions

							
21
Getting To  KnowYour Machine
Staple Case
New
1
2
Empty
1
2
3
Jammed
Staple
Staple Cartridge
FQ-SS32
When the Staple jams
● The following message will
be displayed on the Touch
Panel Display:
Can Not Complete
Confirm Staple Unit
3
6
45
Code Check Points
U13 Low Toner.
U14 Toner Waste Container is full.
U15 Toner Waste Container is not installed.
U16 Call your Service provider.
U18 Total Count reached the limit, consult with your
Key Operator.
Code Check Points
U20 ADF Cover is open.
U21 ADF is opened while scanning from ADF.
U22 ADF Exit Unit is open.
U25 Shake Toner Bottle well.
U90 Battery requires replacement.
(See page 96) 
						

							
22
Getting To  Know Your  Machine
Operation Chart
■
■ ■
■
■  Problem Solving (Continued)
●
● ●
●
●  Removing a Misfed Paper (Paper Entry Area/1st Paper Tray)
Right Cover
Misfed Paper
Right Cover
12
6
●
● ●
●
●  Removing a Misfed Paper (Paper Transport Area)
When the optional Tray/1-Bin
Finisher is installed.12Push
Latch
Misfed Paper
12
●
● ●
●
●  Removing a Misfed Paper (Automatic Duplex Unit)
Right Cover
Paper Feed Guide
12 
						

							
23
Getting To  KnowYour Machine
Heat Roller Cover
1
3
2
1
2
Paper Tray
3
6
45
∗ Confirm that the latch is securely fastened.
Misfed Paper
Latch ∗
Transport Cover
Right Paper Cleaning
Knob
34
Misfed Paper
1
2
Right Cover
34 
						

							
24
Getting To  Know Your  Machine
Operation Chart
■
■ ■
■
■  Problem Solving (Continued)
●
● ●
●
●  Removing a Misfed Paper (2nd/3rd/4th Paper Tray)
Options
3rd Paper Tray (DA-DS305)
4th Paper Tray (DA-DS306)
1
2
Feed Cover
1
2
Paper Tray
12
●
● ●
●
●  Removing a Misfed Paper (ADF)
●
● ●
●
●  Removing a Misfed Paper (1-Bin Finisher)
ADF CoverMisfed Paper
Exit UnitADF Tray
Finisher
Release ButtonMisfed PaperOption (DA-FS300)
12
67
12 
						

							
25
Getting To  KnowYour Machine
Feed Cover
34
ADF TrayExit Unit
Misfed Paper
1
2
Misfed Paper
Remaining
Copies
Upper Cover
1
Misfed Paper
32
FinisherNOTE:
If the misfeed indicator(s) do not clear,
open the upper cover and remove all
misfed paper.
When using the Staple Sort, Shift-Sort,
or Shift-Group mode,  remove the
remaining copies on the staple tray.
Then the copy job will restart.
3
6
45
89
3
10
Close the ADF Cover 
						

							
26
memo 
						

							
27
Before Starting
Before Starting
DP-8032
1234567
1089
Contents
COPY Key
●  To use the unit as a photocopier.
ENERGY SAVER Key
●  Saves power while the copier is not in use.
INTERRUPT Key
●  Interrupts other copy, or print jobs while making copies.
FUNCTION Key
●  Use when changing the paper size, initial function values (default values), and key operator settings.
RESET Key
●  Resets all features to the initial power-on state.
CLEAR Key
●
● ●
●
●  Clears the copy count in the display.
STOP Key
●  Stops the copy run.
STATUS LED (RED)
●  Lights when trouble occurs. ∗∗
ACTIVE LED (GREEN)
●  Lights when machine is active.
PRINT DATA LED (GREEN)
●  Lights when receiving print data.
ORIGINAL
SIZE Keys COPY SIZE
Keys Touch Panel
DisplayKeypad START
Key
∗∗When the machine detects a problem, or a status alarm is activated, the  8  STATUS LED
lights or begins to flash.
LED Lights: Machine detected a trouble status
    No paper in the selected Tray, or Toner has run out.
    Machine detected trouble, such as paper misfed or jammed.
LED Flashes: Machine detected a status alarm
    No paper in the Tray. (Tray not selected)
    Toner is getting low, etc.
● The Control Panel displayed above, shows only copier functions. Please refer to the
appropriate operating instructions for other control panel functions.
∗Fax/Email ONLINE LED for Internet Fax and optional Fax functions
Print ONLINE LED for Printer function
No.
1
2
3
4
5
6
7
8
9
10
NOTE
Control Panel 
						

							
28
Before Starting
Touch Panel Display
12345910
222423
12
15
16
20
21
17
18
28
27
26
25
29
13
14
118
67
19
DP-8032
NOTE●Use only soft finger pressure to activate the Touch Panel Display. DO NOT USE SHARP
OBJECTS such as pens, fingernails etc., as this may damage the panel.
● Touch Panel Display Brightness Adjustment:
To adjust the brightness of the Touch Panel display, press and while holding down the   C
(CLEAR) key, keep pressing the   ORIGINAL SIZE/LEDGER or the  COPY SIZE/LEDGER 
keys until the desired brightness is achieved.
ORIGINAL SIZE/LEDGER : Dimmer
COPY SIZE/LEDGER : BrighterJob Status Indicator
Ex:
 Copying 3 sets.
The Indicator displays the progress of a job task as follows:
0/3  → 1/3  → 2/3  → 3/3 
						

							
29
Before Starting
Contents See Page
Warning Indications 17-21
      : Add Toner        : Add Paper     : Call Service (Call your Service Provider)      : Waste Toner
Original Icon —
Original Size Indication—
Job Build and SADF/Multi-Size Feed Mode Indication 46 and 47
Rotate Mode Indication—
Number of Copies / Original(s) —
Machine / User Error Code Indication 20 and 21
Copy Icon—
Copy Size Indication—
Reserve a Job Button67
Finisher Functions Indication49
Machine  Outline  with Tray  Selection  (Paper Tray  and  Output Tray) —
Paper Level and Size Indication —
Paper Tray Selection Button —
Tandem/Remote Button Indication 35
Tandem/Remote Button35
Output Tray  Indication17
Output Tray  Button17
Density Indicator (7 steps) 17, 31, 71
Manual Exposure Select Buttons (Lighter and Darker) 17, 31, 71
Original Mode Select Button (Text; Text / Photo; Photo) 17, 31, 71
Copy Image and Paper Image Indication —
Copy Ratio Indication —
Original Image Indication—
Completion Notice Button39
Job Queue Button38
Job Settings Button —
 Selected copy jobs will be indicated on the right side of the touch panel display.
(2-Sided/Original  → Copy, Sort/Finish, Zoom/Effects, Insertion/Overlay modes)
Proof Set Button 33
Function Categories —
■
■ ■
■
■  Touch  Panel  Display  Indications
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18 19
20
21 22
23
24
25
26
27
28
29 
						

							
30
Making Copies
Basic Menu
■
■ ■
■
■  Copying the Same Size Originals (1:1)
100%
If set to other
function mode
or
If the original size
is not detected
correctly
■
■ ■
■
■  Using the ADF
ADF
Upper Limit
Indicator
Upper Limit Guide
Set the originals up to the
upper limit indicator/Guide.
ADF Tray
Original Guides
Adjust to the original’s width
■
■ ■
■
■  Copying on Heavy Paper (Post Cards, etc.) (35 lb max.)
Load paper
on the Sheet
Bypass
Select Sheet Bypass, and
touch the Size Change button
34
Select Heavy Paper
 Originals that cannot be used
● Post Cards,  Drawing Papers, Transparencies,  Labelling
Papers, Heavyweight Papers, Thin Art Papers,  Film Thermal
Papers
Inappropriate Originals
● Paper with a smooth surface such as glossy and coated
papers
● Originals with a Lead Edge that is ripped, creased, folded,
punched, or glued.
● Mixed width size Originals (except a combination of Ledger
and Letter, Letter and Legal)
● Paste-ups
● Pressure sensitive or carbon backed papers
● Paper with excessive curl
● Stapled originals
● Freshly printed copies from a laser printer
● Originals with fresh White-Out (Liquid paper correction fluid)
NOTE● During copying and after making copies, the fan motor may start spinning. This is a normal
operation, and is used to cool down the copier.
5
12
123
4
Copy size is automatically selected.