Panasonic Digital Imaging Systems DP-2310/3010/3510/4510/6010 Operating Instructions

Safety Information
11
Getting to Know
Your Machine
CAUTION!denotes hazards that could result in minor injury or damage to the machine.
• TO REDUCE THE RISK OF SHOCK OR FIRE, USE ONLY NO. 26 AWG OR LARGER TELEPHONE LINE
CABLE.
• DISCONNECT ALL POWER TO THE MACHINE BEFORE COVER(S) ARE REMOVED. REPLACE THE
COVER(S) BEFORE THE UNIT IS RE-ENERGIZED.
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk
of fire, electric shock and injury to persons,...

Safety Information
12
CAUTION!denotes hazards that could result in minor injury or damage to the machine.
Do not install the machine near heating or an air conditioning unit.
Avoid exposure to direct sunlight.
Install the machine on a flat surface, leave at least 4 inches (10 cm) of space
between the machine and other objects.
Do not block the ventilation openings.
Do not place heavy objects or spill liquids on the machine. 

13
memo
Getting to Know
Your Machine 

Safety Information
14
[For DP-3510/4510/6010]
Connecting the Cables
ACTIVITY Lamp
Blinks when there is data traffic
on the LAN. LINK Lamp
Illuminates when connected to the LAN. 
Lamp will not turn ON if LAN cable is defective 
(contains breaks).
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.  
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with 
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX...

Safety Information
15
Connecting the Cables
Getting to Know
Your Machine
[For DP-2310/3010]
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.  
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with 
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet HubEthernet LAN 
(10Base-T/100Base-TX) 
Cable (Not  included)
Ethernet-Token-Ring 
Bridge
(Optional Order 
No. UE-204006)ACTIVITY Lamp
Blinks when...

16
Control Panel
Used to select the
original size manually.
Lights when receiving print data.
Touch Panel Display
PRINT DATA LED (Green)
Lights when trouble occurs. ALARM LED (Red)
Lights when machine is active. ACTIVE LED (Green)
Used to select the
FAX/EMAIL mode.ON LINE Indicator
Blinks : When sending or
            receiving FAX/Email
            communication.
[Ex.: DP-6010] 

Control Panel
17
Getting to Know
Your Machine
Used to switch the
machine into energy
saving mode.
For more details, see
Energy Saver page
of the Operating
Instructions (For Copier.)Used to start or 
select the function 
and sub-functions.Used to reset
all the previously
set functions.
Use this button when
correcting entered
numbers or characters.
Press this button when
you want to stop the
communication,
registration operation,
or audible tone.
Press this button to 
start transmission, email...

memo
18 

19
Before Starting
Before Starting
Loading Documents
NOTE1. When an oversized original is sent to another machine, sometimes, it is reduced in accordance
with the other partys recording paper size.
Ex:
How to Load Documents
1. On the ADF / Inverting ADF 2. On the Platen Glass
• Insert the original(s) Face Up into the ADF until
the leading edge placed into the machine
stops.• Place a book or an original Face Down on the
Platen Glass, aligning it with the arrow mark on
the original size guides.
Sending...

20
Basic Transmission Settings
You can temporarily change the transmission settings either before or after you place the document on the
ADF. These settings are as follows:
After your document(s) have been sent, your machine will automatically return to the preset settings.
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
General Description
•...