Panasonic Digital Imaging System For Copy And Network Scan Functions Dp 8020 Operating Instructions

11
Getting To KnowYour Machine
Manufacturer’s Name 
and Address Factory ID
• ATTENTION:Hot Surface• ATTENTION:Zone chauffée• ACHTUNG   :Heiße Oberfläche• ATENCION :Superficie caliente•                     •  FDA1992
■
 Laser Safety
■  Caution Label
LASER SAFETY
This unit employs a laser. Only qualified service personnel
should attempt to service this device due to possible eye
injury.
CAUTION:
USE OF CONTROLS, ADJUSTMENTS OR
PERFORMANCE PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN...

12
Getting To Know Your Machine
Precautions
Installation
■The maximum power consumption is 1.3 kW.
A properly wired (grounded), dedicated, 12 A, 120 V AC outlet is required. Do not use an extension
cord.
The power cord on this machine must be used to disconnect the main power.
Please ensure that the machine is installed near a wall outlet and is ea\
sily accessible.
Supplies
■ Store the Toner and paper in cool areas with low humidity.
● Use high quality 16 - 24 lb (60 - 90  g/m2) (Sheet Bypass: 15 - 34...

13
Getting To KnowYour Machine
Handling
■ Do not turn the Power Switch Off, or open the Front Cover during copying/printing.
■ Sleep/Shutdown Mode Notice
● The following functions will not work if the Sleep/Off Mode setting is set to the Shutdown mode.
When using any of the following functions, we recommend that you leave t\
he Sleep/Off Mode in the
initial factory default setting (Sleep mode).
-Turn OFF the Power Switch on the Right Side of the machine.
- Printer Function (Local Parallel Port and...

14
Getting To Know Your Machine
INVINVLT RLGLLDR
LTR
LDR INV
LTR
LGL INV
LTR
INV
INV-R
LTR-R LGL
LDR
W idth Guides
Face Down
Until it stops
Upper Limit Guides
Until it stops
Sheet Bypass
PUSH
Paper Tray
Max Level
Indicator
Paper Tray
∗
∗ ∗
∗
∗Hold the guides by the center when
adjusting the width
Operation Chart
If set to other
function mode
(DP-8020E/8020P
only)
F ace Up
A
B
C
From
ADF/i-ADF
(Option)
From
Platen Face Down
●If the original is not positioned
properly, a portion of the original
may not be...

15
Getting To KnowYour Machine
Reduction/
Enlargement
only
■  Problem Solving
34
Number of
Copies
(Max. 999)
5
Select desired settings
(See pages 24-51)
Interrupt
(See page 48)
Sort
(See page 42) Zoom Mode   (See page 25)
Adding Paper
Replacing Toner Bottle/Toner Waste Container (See page 16)
Checking Toner (See below)Removing Misfed Paper
(See page 16)
U## (User Error Code) (See page 20)
J## (Jam Error Code) (See page 21)
E## (Machine Error Code) (Call your Service provider)
REPLACE DRUM UNIT (Call your...

16
Getting To Know Your Machine
Misfed Paper
● Removing Misfed Paper (Paper Transport/Fusing Area) (J01, J30, J31, J33, J45, J48, J95)
REMOVE MISFED PAPER
J48
Left Cover
Misfed Paper
Lift Upward and Pull Out
Paper Tray
Jam RemovalKnobLeft Cover
Corona Cleaner
Toner Bottle (New)
Toner Waste  Container
Front Cover
7
Operation Chart
■  Problem Solving
●  Removing Misfed Paper (Paper Exit Area) (J46)
● Replacing Toner Bottle/Toner Waste Container
12
REMOVE MISFED PAPER
J46
ATTENTION
● For optimum copy...

17
Getting To KnowYour Machine
Toner Waste 
Container (New)
Cap
Toner Waste Container
Paper Tray
Lift Upward and 
insert the TrayLeft Cover
Heat Roller Cover
Jam Removal Knob
Misfed Paper
Left Cover
Misfed Paper
Corona Cleaner Handle
Toner Bottle (New)
Toner Bottle (New)
T oner Bottle (Empty)
4
6
3
5
8910
5
87
4
43
Close the Front Cover .
To
Release
To
Lock
3 

18
Getting To Know Your Machine
Paper Tray
Misfed PaperFeed Cover
ADF TrayExit Unit
Misfed PaperADF Cover
Misfed PaperADF Cover
Operation Chart
■  Problem Solving
●  Removing Misfed Paper (ADF: Option for DP-8020E/8020P/8016P) (J70, J\
71, J79, J92, J93)
12
REMOVE MISFED PAPER
J70
● Removing Misfed Paper (i-ADF: Option for DP-8020E) (J70, J71, J72, J\
73, J76, J78, J79, J92, J93)
REMOVE MISFED PAPER
J70
67
● Removing Misfed Paper (2nd/3rd/4th Paper Tray: Option)
(J02, J03, J04, J07, J08, J09, J12, J13,...

19
Getting To KnowYour Machine
Misfed Paper
Misfed Paper
Lift Upward and Pull OutP aper Tray
1
2
Misfed Paper
Misfed Paper
Exit UnitADF Tray
ADF CoverMisfed Paper
ADF
34
5
6
6
34
89
534
ADF Cover
10 

20
Getting To Know Your Machine
Code Check PointsU20 ADF Cover is open.
U21 ADF/i-ADF was opened while scanning from
ADF/i-ADF.
U25 Toner hardened inside the Toner Bottle. Remove
the Toner Bottle, and shake it well.
U90 Battery requires replacement.
(See page 80)
Misfed PaperLeft Cover
■  Problem Solving
●  Removing Misfed Paper (J19, J32, J82, J85, J87: ADU for DP-8020E only)
12
REMOVE MISFED PAPER
J82
EX.
Code Check Points
U01 Front and/or Left Cover is open.
U07 Feed Cover is open. (See page 18)
U13...