Panasonic Digital Imaging System For Copy And Network Scan Functions Dp 8020 Operating Instructions

41
Making Copies
or
34
EFFECTS         (1-2)
ENTER NO. OR ∨ 
^
or
1:CENTERING?
PRESS SET TO SELECT
2:IMAGE REPEAT?
PRESS SET TO SELECT
5
PAPER TRAY
TRAY-1             ∨ 
^
TRAY-1
TRAY-2
TRAY-3
TRAY-4
BYPASS
: Centering
: Image Repeat
Exits this
mode.
7
NOTE: Tray-2, 3 and 4 are
options. (See page 69)
6 

42
Making Copies
■ Sort
Sort
Multiple copy sets are sorted automatically.
2
Lights
Sort mode is
selected.
5
ANOTHER ORIGINAL?
1:YES 2:NO
1: YES
Go to next step
12
312
312
3
NOTE
Initial Sort Mode settings can be selected
within the Copier Settings, Parameter No. 10
(SORT PRIORITY ADF) or Parameter No.
11  (SORT PRIOR. GLASS). (See pages 57
and 58)
Initial Sort Priority Setting:
For ADF: 2:Sort; For Platen: 1:Non-Sort
6
Non-Sort
Copy is stored on the Output Tray.
1
or
For ADF
For i-ADF
Steps 5 to 8 from...

43
Making Copies
Number of
Copies
(Max. 999)
4
7
From Platen only
3
LTR: Letter-R
INV
:  Invoice-R
INV
:  Invoice
LGL
:
 Legal
LTR: Letter
LDR: Ledger
~58
From Platen
only
PRESS START TO
CONTINUE
8
ANOTHER ORIGINAL?
1:YES 2:NO
:NO
Starts making copies.
:YES
Continues to copy another
original, repeat steps 1 and 4- 
 2
to step 7. 

44
Making Copies
Other Features
■ Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even\
 if the Platen Cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) i\
n advance.
■  Digital Skyshot Mode
The default setting of Digital Skyshot Mode is “NORMAL”. This
default setting can be changed in the Copier...

45
Making Copies
LTR: Letter-R
INV
:  Invoice-R
INV
:  Invoice
LGL
:
 Legal
LTR: Letter
LDR: Ledger
2
NOTE
● An incorrect position detection of the original may occur when
a strong light shines onto the glass during digital skyshot mode.
● An incorrect exposure may occur when there is a black line at
the edge of the original or an image which the machine
interprets as a black pattern in the digital skyshot mode.
Number of
Copies
(Max. 999)
3
2
Custom size ∗
or
∗Default M1/M2 size can be
changed by...

46
Making Copies
Other Features
■ Job Build and SADF Mode
Special originals (like thin paper, etc.) can be
fed from the ADF Tray and copied continuously
using the Job Build and SADF  Mode.
NOTE: Set the Copier Settings, Parameter No.
12 (SADF DEFAULT) to “OFF” position
in advance. (See page 59)
Thin paper: minimum 15 lb (55  g/m
2)
21For ADF
For i-ADF
Select desired
settings
Example:To make 5 sets of sorted copies of
80 sheets of originals. (Letter size)
1For ADF
For i-ADF
Place the first 50
sheets of...

47
Making Copies
Number of Copies
(Max. 999)
34For ADF
For i-ADFPlace the next
original within 5
sec. of last ejected
original.
Number of
Copies
(Max. 999)
(ex. 5)
45For ADF
For i-ADFPlace the next
original within 5
sec. of last
ejected original.
(30 sheets)3
Lights
Sort mode is
selected.
Select the Sort mode
Starts the printing
process.
Starts the printing process.
(ex. 5 sets of 80 sheet sorted
copies)
Number of
Copies
(Max. 999)
345
When starting the printing
process:
Set the next copy job, repeat...

48
Making Copies
or
■ Energy Saver (Power Saver Mode, Sleep/Shutdown Mode)
These modes save power while the machine is not in use.
To enter
To  exit
Other Features
or Automatically enters
the Power Saver
Mode after 10
minutes from
the last job.
∗
Automatically enters the Sleep/
Shutdown Mode after 10 minutes
from the last job. ∗
NOTE
∗To  adjust the default Sleep/
Shutdown Mode timer, see
page 54.
■  Interrupt Mode
This mode interrupts the
current running copy job and
allows other copy jobs to be...

49
Making Copies
Modes Power Consumption Warm Up Time Unavailable Functions
Standby Approx. 120 W — ————————
Power Saver Approx. 19.5 W Approx. 30 sec. ————————
Sleep Approx. 8.5 W Approx. 30 sec. ————————Shutdown Approx. 1.6 W Approx. 30 sec. • Printer Function (Local USB and Network Connection)
• Internet Fax/Email Function
• Facsimile Function
(If the LAN Cable is not connected, and the DHCP
DEFAULT is set to VALID, while in this mode
(Shutdown),  the machine will not answer an
incoming Fax call) (See...

50
Making Copies
■ Completion Notice
If Completion Notice is set, you will be
notified on your computer when
copying is completed.
Before using this function, install the
Panasonic Document Management
System (Communications Utility),
and the  Printer Driver (with Job
Status Utility)  on your computer, and
then configure each software referring
to  Setting up the Scanner
Configuration using the
Communications Utility , and Setting
up the Completion Notice.  (See
Page 72)
ABBR
ABBR [_   ]
ENTER ABBR No....