Panasonic Digital Imaging System For Copy And Network Scan Functions Dp 8020 Operating Instructions

51
Making Copies
23
[01]SALES
10.74.252.66
ABBR No.
(2-digit)
4-2
or
For ADF
For i-ADF
4-2
[06]SALES_3
10.74.252.66[05]SALES_2
10.74.252.66
ENTER LETTER(S)
SA_
Enter letter(s)
(See page 70)
[01]SALES
10.74.252.663
3
and
Press COPY key and FUNCTION
key simultaneously
6
COMPLETION NOTICE
SELECT DESTINATION
Number of
Copies
(Max. 999)
4-1
Copy Job Completed Notice
will be displayed on your PC.
5 

52
Function
General
Settings
General
Settings for
Key Operator Copier
Settings
Copier
Settings for
Key Operator Printer
Settings
Printer
Settings for
Key Operator Fax/Email
∗
Settings
Scanner
∗
Settings
Input Key Operator Password (See page 13)
General Settings:Changing the Initial Machine Modes
● Power On Default Mode, Key Operator Mode, etc.
(See page 54)
For Key Operator:
Paper Size, Department Counter, Network TCP/IP
settings, etc.
(See pages 54 - 56)
■ Using Function Modes to Change the Initial...

53
Function
Copier Settings:Changing the Initial Copier Modes
●Default function of each copy mode.
(See pages 57 and 58)
For Key Operator:
Original mode, Contrast, etc.
(See pages 58 and 59)
Printer Settings:Changing the Initial Printer Modes
●Default function of each print mode.
(See page 59)
For Key Operator:
Job completion time, Page protection, Error page print,
Spool function, PS configuration, Font list print, Mailbox
data handling, etc.
(See page 60)
● Normally, you do not need to set the Printer...

54
Function
■ General Settings
No.
00 POWER ON DEFAULT Selects the default operation mode. 1: COPY 1:COPY / 2:FAX / 3:PRINTER / 4:SCANNER
(Fax is option, see page 69)
01 SORT MEMORY USAGE Selects whether to display the amount of sort 1: OFF memory used on the control panel.
1:OFF / 2:DISPLAY
02 DEPT. COUNTER Displays the Total Copy usage and copy limit of
Consult your authorized
the selected department.Panasonic dealer
03 SORT-ROTATE Selects the rotate-sort mode. 1:OFF
1:OFF / 2:ON (Available for Letter...

55
Function
08 SPECIAL TRAY 2 Selects the paper tray to use for special paper. 1:NONE1:NONE / 2:TRAY-1 / 3:TRAY-2 / 4:TRAY-3 /
 5:TRAY-4 / 6:BYPASS
(Only available when optional TRAY-2 and 3/4
are installed. see page 69)
09 KEY/TOUCH BEEP Selects the default key sound level. 2:SOFT
1:OFF / 2:SOFT / 3:LOUD
10 BYPASS SET BEEP Selects whether to sound a Beep when paper is 1:INVALID set on the Sheet Bypass.
1:INVALID / 2:VALID
11 ORIG.SET BEEP ADF Selects whether to sound a Beep when paper is 2:VALID
placed...

56
Function
23 DNS SERVER ADDR.∗2Selects whether to enable the DNS Server, and 2:VALID
sets its settings for Internet Fax/Email Function.
1:INVALID
2:VALID

1:HOST NAME / 2:DOMAIN NAME /
3:PRI. DNS SERVER (IP ADDRESS1) /
4:SEC. DNS SERVER (IP ADDRESS2)
24 MAC ADDRESS Indicates the MAC address.
25 HARD DISK FORMAT ∗
4Formats the hard disk.
PRESS SET TO START
26 HARD DISK ERR CHK ∗
4Selects the provision for the hard disk error check.
PRESS SET TO START
27 ABBR GROUP ID Inputs the Group ID for the address...

57
Function
00 MARGIN DEFAULT Selects the margin shift value. 1:LEFT1:POSITION / 2:VALUE    10 mm
1:LEFT / 2:RIGHT / 3:TOP / 4:BOTTOM
Procedure:
Select 1:POSITION and select a Margin
position then, select 2:VALUE and input a shift
value with Keypad.
01 EDGE DEFAULT Selects the edge width. 1:EQUAL RATE 1:EQUAL RATE (X & Y) / 2:INDIVIDUAL    (X & Y)
Procedure:     5 mm
Select 1:EQUAL RATE (X & Y)  or
2:INDIVIDUAL then, input a edge value with
Keypad.
EQUAL RATE (X & Y): same edge value
INDIVIDUAL:...

58
Function
■ Copier Settings (Continued)
11 SORT PRIOR. GLASS Selects the sort priority when using the Platen. 1:NON-SORT
1:NON-SORT / 2:SORT
12 1 →2 BINDING DEF. Selects the binding location for 1 →2 Copy. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
13 2 →1 BINDING DEF. Selects the binding location for 2 →1 Copy. 1:LONG EDGE
1:LONG EDGE / 2:SHORT EDGE
14 BOOK  → 2 DEFAULT Selects the page layout of the Book →2 copy. 1:BOOK FORMAT
1:BOOK FORMAT     2:FLIPPING
 2:PAGE ORDER
1:FACING / 2:FLIPPING     1:L →R...

59
Function
00 NUMBER OF PRINTS Sets the default number of prints. 1
1-999
01 PAPER SIZE Sets the default paper size setting. LETTER LETTER / INVOICE / FLS1 / FLS2 / A3 / B4 /
A4 / B5 / A5 / LEDGER / LEGAL
02 PAPER TRAY Sets the default Paper Tray selection. Auto
AUTO / BYPASS / TRAY-1 / TRAY-2 / TRAY-3 / TRAY-4
03 PRINT DIRECTION Sets the default print orientation setting. 1:PORTRAIT
1:PORTRAIT / 2:L-SCAPE
04 PRINT DATA Determines the provision of the print data.
PRESS SET TO PRINT
05 2-SIDED PRINT...

60
Function
00 PRINTER SETTINGS Prints the printer settings.
PRESS SET TO PRINT
01 COMPLETION TIME Sets the job completion time setting. 180SEC
1-999SEC
02 PAGE PROTECTION Selects whether to enable automatic 1:OFF compression when the received data exceeds
the page memory capacity.
(This is accomplished by reducing resolution,
and/or deleting pixels to fit the data onto the
available page memory, then print it out.)
When the setting is in the OFF position, upon
exceeding the page memory capacity, the...