Panasonic Digital Hd Video Cassette Recorder Ajhd1800 Operating Instructions

81
System menus (continued)
The underlining (__) denotes the factory setting mode.
*UP:  This is for HD outputs (during HD tape playback or up-
conversion outputs).
*DW: This is for SD outputs (during SD tape playback or
down-conversion outputs).
No./Item Description of setting
12
SYS H 
(HD)
*UP
For adjusting the HD SDI output system phase 
in 13.5nS steps.
j: To advance the phase.   i: To delay the phase.
 


0000 -2200
      : :
2200
0
      : :
4400 22000000 -2750
      : :
2750
0
      : :
5500...

82
System menus (continued)
*1System switching
zSome of the system menu and setup menu items each have 
different settings for different operation modes [59/60 Hz, 50 Hz, 
23/24 Hz, 25 Hz (HD or SD) and 50 Hz (HD or SD)].  These 
settings are saved separately.
(This concerns those items whose settings were described for 
each operation mode on the system menu and setup menu 
tables.)
zFor further details, refer to   on page 113.
zSince this VTR becomes a playback-only unit when the 23/24 
Hz, 25 Hz (HD...

83
Setup menus

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*The underlining (__) denotes the factory setting mode.
No./Item Description of setting
000
P-ROLL TIMEFor setting the preroll time. Any time from 0 to 
30 seconds can be set in 1-second increments.
0000 0s
      : :
0005
5s      : :
0030 30s

zDuring automatic editing (PREVIEW or AUTO 
EDIT), no operations are performed if the preroll 
time...

84
Setup menus (continued)
 (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
007
CHARA
H-POSFor setting the character position in the 
horizontal direction for superimposed 
indications, such as time codes for HD SDI 
MONITOR/SD SDI MONITOR/VIDEO OUT3 
connectors and superimposed indications from 
the IEEE...

85
Setup menus (continued)
 (continued)
*1: When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, 
SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*2: When the 23/24 Hz mode is selected in System Menu No. 25 
(SYSTEM FREQ), this item is not displayed.
*The underlining (__) denotes the factory setting mode.
No./Item Description of setting
022
PB FORMATFor selecting the format in which the tape is to 
be played back.
0000 MANUThe format is determined by the setting...

86
Setup menus (continued)
 (continued)
 
zIn the EJECT mode, the format selected by the setup
menu item No.020 (SYS FORMAT) setting applies.
zIf “AUTO” has been selected as the setup menu item
No.022 (PB FORMAT) setting, the setup menu item
No.023 (FORMAT SEL) setting is used as the format when
the format is not detected (when the tape has just been
inserted).
However, when “DV” or “DVCAM” has been selected, the
VTR operation will be as if “HD-LP” has been selected.
Formats in which the tape is played...

87
Setup menus (continued)

*1: When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
100
SEARCH ENAFor selecting the direct search dial operation.
0000DIAL
Direct search dial operations are performed.0001 KEYUnless the search button is pressed, the mode 
does not change to the search mode.
101
SHTL MAXFor selecting the maximum...

88
Setup menus (continued)
 (continued)
Description of MEMORY STOP function
!If the FF button is pressed, the normal FF operation is 
performed since there is no 0 point in the direction of this 
operation.
@If the REW button is pressed, the PREROLL lamp lights (as 
does the SHTL lamp), the VTR prerolls the tape, and it 
automatically stops when the counter value is at the 0 position.
#If the REW button is pressed, the normal REW operation is 
performed since there is no 0 point in the direction of this...

89
Setup menus (continued)

 (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed. No./Item Description of setting
118*1
SP MODE
INH
For selecting whether to allow or inhibit 
recording on a tape which has been written by a 
format other than DVCPRO HD-LP.
0000 OFFRecording on the cassette tape is allowed.0001ONRecording on the cassette tape is inhibited.
 
When [OFF] is selected, the...

90
Setup menus (continued)

The underlining (__) denotes the factory setting mode.
No./Item Description of setting
200
PA R A  R U NFor selecting whether to operate two or more 
VTRs in synchronization.
0000DIS
The VTRs are not operated in synchronization.0001 ENAThe VTRs are operated in synchronization.

To operate the VTRs in synchronization, set all the 
VTRs to 1 (ENA).  (Refer to page 16.)
202
ID SELFor setting what ID information is to be 
returned to the controller.
0000 OTHERFor setting the ID...