Panasonic Digital Hd Video Cassette Recorder Ajhd1800 Operating Instructions

91
Setup menus (continued)

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
300
IN/OUT DELFor selecting the operation to be performed 
when an edit point has been set incorrectly 
(when the OUT point comes before the IN 
point).
0000 MANUEditing is not performed unless the illegal edit 
point is cleared or set...

92
Setup menus (continued)
 (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
313
CLICK POINTWhen the search dial from intermediate 
position turning to the right or the left with 
SLOW mode, the speed in the click point is set.
0000±1i/j1 time speed0002 ±1.85
i/j1.85 time speed (i1.85/j1.5 times speed 
for...

93
Setup menus (continued)


The cumulative total standby time passed in the same
location increases at such times when the same material is
repeatedly used as is the case when programs are
transmitted, for example.
To protect the tape, it is recommended to set the standby
time at the same position as short as possible.The underlining (__) denotes the factory setting mode.
No./Item Description of setting
400
STILL TIMERFor selecting the duration of the time taken 
after the VTR is left standing in the...

94
Setup menus (continued)

*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*2 When the 23/24 Hz mode, 25 Hz (HD) mode, or 50 Hz (HD) 
mode is selected in System Menu No. 25 (SYSTEM FREQ), 
this item is not displayed.
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
500*2
VITC BLANK
For selecting whether or not to output the VITC 
signal at the positions selected by...

95
Setup menus (continued)
 
(continued)
SBC (sub code data) area:
This is an area on the helical track, and it is separate from the video 
and audio data area.  The time codes, recording dates and times 
and other tape control information complying with SMPTE/EBU 
standards are stored here.  As with the conventional LTC (linear 
time code), the time code can be read even during rewinding or fast 
forwarding.  It can also be read out when the tape has stopped.
VAUX (video auxiliary data) area:
This area...

96
Setup menus (continued)

The underlining (__) denotes the factory setting mode.
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*2 When the 23/24 Hz mode, 25 Hz (HD) mode, or 50 Hz (HD) 
mode is selected in System Menu No. 25 (SYSTEM FREQ), 
this item is not displayed.
*3 When the 25 Hz (HD, SD) mode or 50 Hz (HD, SD) mode is 
selected in System Menu No. 25 (SYSTEM FREQ), this item is 
not displayed....

97
Setup menus (continued)
 (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*2 When the 25 Hz (HD, SD) mode or 50 Hz (HD, SD) mode is 
selected in System Menu No. 25 (SYSTEM FREQ), this item is 
not displayed.
*3 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
The underlining (__) denotes the...

98
Setup menus (continued)
 (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*2 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, 50 Hz (HD, 
SD) mode or 50 Hz mode is selected in System Menu No. 25 
(SYSTEM FREQ), this item is not displayed.
*3 When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, 
SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*UP: With...

99
Setup menus (continued)
 (continued)
*UP: With HD output (HD tape playback or up-converted output)
*DW: With SD output (SD tape playback or down-converted output)
The underlining (__) denotes the factory setting mode.
No./Item Description of setting
656
BK LVL 
(HD)
*UP
For adjusting the black level of the HD SDI 
output.
50 -10.0%
      : :
150
0.0%      : :
250 +10.0%

This setting takes effect when “CMPNT” has been 
selected as the setup menu item No.650 setting.
658
Y LVL (SD)
*DW
For adjusting...

100
Setup menus (continued)
 (continued)
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz 
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*2 When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD, 
SD) mode is selected in System Menu No. 25 (SYSTEM 
FREQ), this item is not displayed.
*3 When the 23/24 Hz mode, 25 Hz (HD) mode, or 50 Hz (HD) 
mode is selected in System Menu No. 25 (SYSTEM FREQ), 
this item is not displayed.
*UP: With HD output (HD tape...