Panasonic Digital Hd Video Cassette Recorder Ajhd1800 Operating Instructions

71
Function menus(continued)

Different kinds of settings and information can be stored or
retrieved from an SD memory card.  When   (CARD) is
pressed on the  screen while the   button is held
down, the function menu shown below is displayed.
[MENU/ERROR LOG/MULTI CUE]
SYSTEM MENU/SETUP MENU/
50PIN ASSIGN
MULTI CUE
ERROR LOG
 
zThe available capacity on an SD memory card is in the 
range from 8 MB to 2 GB.
zAn SD memory card must be formatted on the unit.
zAn SRAM card cannot be used.
zAn SDHC memory...

72
Function menus (continued)
 (continued)
[MENU/ERROR LOG/MULTI CUE]
zThe SD memory card is capable of storing and retrieving 
the settings from the SETUP MENU (Current, USER1 to 
USER4)/SYSTEM MENU, the registered contents of 
50PIN ASSIGN, the registered points of MULTI CUE, and 
the contents of the ERROR LOG.
zTitles can be provided for all the data files, and when the
files are saved or loaded, the titles are also copied at the
same time.
zThe file lock prevents the files on an SD memory card from...

73
Function menus(continued)
 (continued)
5File overwrite inhibit facility
The file lock prevents the files on an SD memory card
from being overwritten.
z
Locking a file
Select the file to be locked, and press   (LOCK).
z
Unlocking a file
Press   (LOCK) again.
  
The locked or unlocked status is displayed in the file
status.
[±: Unlocked status, µ: locked status]
F5
F5
Function button/
item Switching 
method SettingCorresponding setup menu 
itemDescription of setting
F1
FORMATF+Press
______ Formatting SD...

74
Function menus (continued)

Using the front panel controls and on-screen menus,
functions are registered into the input pins of the parallel
remote (50PIN) connector and the statuses are registered
into its output pins.
When   (50P IN) or   (50P OT) is pressed while the 
button is held down on the  menu, the
function menu shown below appears, and functions can be
registered or deleted.
Registered item names
Setup menu items and 50PIN special menu items can be
registered in the parallel remote...

75
Function menus(continued)
 (continued)
Registering functions in the input pins/Active 
inputs
Registering functions in the output pins/Active 
outputs
1Selecting the 50-pin connector pins
Turn the ADJ dial to move the selection marker and
select the pin of the 50-pin connector into which the
menu item is to be registered.
2Entering the 50-pin connector pins
Press the ADJ dial.
The entered 50-pin connector pin display is highlighted.
3Selecting the menu item
Turn the ADJ dial and select the menu item...

76
Function menus (continued)
 (continued)
Special OUT menu list
No.
SUPER 
DISPLAYDescription of setting
C00
EJECTEJECT status
C01
STBY ONSTANDBY ON status
C02
CUECUE-UP completed status
C03
STILLSTILL status
C04
PANEL STOPStatus in which the front panel STOP button is 
pressed down
C05
PRE CTLStatus of whether to inhibit overwrite during normal 
recording
C06
422 REM ON9-pin connector function status
C07
REMOTE50-pin connector function status
C08
REC INH1Recording inhibit status 1
C09
REC INH2Recording...

77
Function menus(continued)
 (continued)
The statuses established by a multiple number of pins in the special OUT menu list are displayed.  Pin status “1” signifies
“active low” and “0” signifies “open.”
Error statuses
TC input statuses
Tape recording inhibit statuses
Recording inhibit statuses
Down-conversion statuses
Up-conversion statusesUp-conversion down-conversion statuses  
C22
ERR0C23
ERR1C24
ERR2Error status
0 0 0 SERVO NOT LOCKED (priority level 1)
0 0 1 SERVO LOCKED (priority level 4)
0 1 0...

78
Function menus (continued)
 (continued)
Flow of registration
50P IN/OUT ASSIGN function buttons
Open the 
screen.Status in which 
registered 50-pin 
connector pin 
selection is enabled Close the 
screen.
F6 (EXIT)
Status in which selected 
50-pin connector pin 
menu item selection is 
enabled Press the ADJ dial.
Status in which 
selected menu item 
setting selection is 
enabledTurn the ADJ dial.   Turn the ADJ dial.  
F4 (one pin reset)   
F i F4 (all pins reset)
F5 (settings entered)Turn the ADJ...

79
Function menus(continued)
 (continued)
50-pin assignment factory settings
“__” denotes that nothing is subject to control or to a status.
 
zFor a command, input TTL level signals; for an active low
edge, input an electrical signal of 100 ms or more.
zFor a status, a maximum open collector and sink current of
6 mA is output.
Pin no. I/O Setting item 
1IREC
2IPLAY
3IFF
4IREW
5ISTOP
6I
__
7I__
8I422 REMOTE ON
9I422 REMOTE OFF
10 ILOCAL ENABLE
11 IEJECT
12 IIN SET
13 IREC INH ALL
14 IREC INH PRE
15...

80
System menus
The underlining (__) denotes the factory setting mode.
Video output signal adjustments
The control matrix for the adjustments is shown in the table
below.External encoder remote controller:
Only adjustments of the external encoder remote
controller are performed.
This unit
Only adjustments of the setup menu items are performed.
External encoder remote controller/this unit
Adjustments can be performed from both the external
encoder remote controller and setup menus.
 
Use the AJ-ER50,...