Panasonic Digital Hd Video Cassette Recorder Ajhd1700 Operating Instructions

81
Setup menus
The underlining (__) denotes the factory setting mode.

No./Item Description of setting
000
P-ROLL TIMEFor setting the preroll time.
Any time from 0 to 30 seconds can be set in 1-
second increments.
0000 0s
::
0005
5s::
0030 30s

•During automatic editing (PREVIEW or AUTO EDIT),
no operations are performed if the preroll time is set
to 0 seconds.
•If  the  phases  are  to  be  synchronized  between  two
decks for editing as per the setup menu item No.004
(SYNCHRONIZE)  setting,  set  the...

82
Setup menus
The underlining (__) denotes the factory setting mode.
 (continued)
No./Item Description of settingNo./Item Description of setting
008
CHARA 
V-POSFor  setting  the  vertical  positions  of  the
characters  for  the  time  code  and  other
superimposed  displays  of  the  HD  SDI
MONITOR,  SD  SDI  MONITOR  and  VIDEO
OUT3 connectors.
0000 0
::
0023
23
::
0032 32

When  this  menu  item  has  been  set,  the  displays  are
output to the VIDEO OUT3 connector in the DISPLAY
SEL  status  even...

83
The underlining (__) denotes the factory setting mode.
Setup menus
 (continued)
Formats in which the tape is played back
No./Item Description of setting
031*4
OUT REFVideo output reference
0000AUTO:When  the  HD  REF  input  signal  is
supplied, it is used as the reference.  If
it is not supplied but the SD REF input
signal  is  supplied,  the  SD  REF  signal
serves as the reference instead.
If neither the HD REF nor SD REF input
signal is supplied, the HD serial signal
serves as the reference.
If...

84
Setup menus
The underlining (__) denotes the factory setting mode.

No./Item Description of setting
100
SEARCH ENAFor selecting the direct search dial operation.0000DIAL:
Direct search dial operations are performed.
0001 KEY:
Operation  does  not  transfer  to  the  search
mode unless the SHTL, JOG or VAR button is
pressed.
101
SHTL MAXFor selecting the maximum speed of shuttle
operations.
0000k
9.8:k9.8 times normal speed0001k16:k16 times normal speed0002k
32:k32 times normal speed
Depending on the...

85
Setup menus
The underlining (__) denotes the factory setting mode.
(continued)
113*1
REC INH
For selecting whether to allow or inhibit recording
on the cassette tape.
0000OFF:Recording on the cassette tape is enabled when the
cassette’s accidental erasure prevention mechanism
has been set to the recording enable position.
0001 ALL:All recording on the cassette tape is inhibited.0002 PRE:Overwriting is inhibited during normal recording.
This is the setting to activate the accidental erasure
prevention...

86
Setup menus
The underlining (__) denotes the factory setting mode.
(continued)
No./Item Description of setting
118*1
SP MODE
INHFor  selecting  whether  to  allow  or  inhibit
recording on a tape which has been written
by a format other than DVCPRO HD-LP.0000 OFF:
Recording on the cassette tape is allowed.
0001ON:
Recording on the cassette tape is inhibited.
 
•When 0 (OFF) has been selected, whether recording
on  the  cassette  tape  is  allowed  or  inhibited  is
determined  by  the  setup  menu...

204
RS232C SELFor selecting whether the RS-232C connector
is to function.
0000OFF:The  RS-232C  connector  does
not function.
0001 ON:The RS-232C connector functions.
87
Setup menus
The underlining (__) denotes the factory setting mode.

No./Item Description of setting
200
PARA RUNFor selecting whether to operate two or more
VTRs in synchronization.
0000DIS:The  VTRs  are  not  operated  in
synchronization.
0001 ENA:The  VTRs  are  operated  in
synchronization.

To  operate  the  VTRs  in...

88
Setup menus
The underlining (__) denotes the factory setting mode.

No./Item Description of setting
300
IN/OUT DELFor selecting the operation to be performed when
an  edit  point  has  been  set  incorrectly  (when  the
OUT point comes before the IN point).
0000 MANU:
Editing is not performed unless the illegal edit
point is cleared or set properly.
0001AUTO:
The edit point which had already been input is
cleared automatically.
301
NEGA FLASHFor selecting whether to show a negative display
(time  code...

89
Setup menus
The underlining (__) denotes the factory setting mode.
 (continued)
No./Item Description of settingNo./Item Description of setting
324*1
EDIT RPLCECAs  with  setup  menu  item  No.320,  the  VTR’s
CUE  edit  presets  are  set  to  ON  or  OFF
following the analog audio signals specified
by the editor or controller.
0000N-DEF:
Not set.
0001 CH1:
The analog CH1 edit presets are followed.
0002 CH2:
The analog CH2 edit presets are followed.
0003 CH1+2:
The  analog  CH1  or  CH2  edit  presets...

90
Setup menus
The underlining (__) denotes the factory setting mode. 
The  cumulative  total  standby  time  passed  in  the  same  location
increases at such times when the same material is repeatedly used
as is the case when programs are transmitted, for example.

No./Item Description of settingNo./Item Description of setting
401
SRC
PROTECTFor selecting the operation to be performed
when the tape protection mode is established
after  the  VTR  has  been  left  standing  in  the
STILL status in a...