Panasonic Digital Hd Video Cassette Recorder Ajhd1700 Operating Instructions

d12h
24h
51
Function menus

The TC-related settings are performed on these menu
screens.Whether the TC is to be superimposed onto
the display can also be set on this screen.
Function
button/item Switching
method Corresponding setup
menu item
F1
TC SRCToggle No. 507
TC SOURCEDescription of setting
Refer to the setup menu.Setting
When HD SDI, INT SG or SDTI is selected:INT
EXT_L
SLTC
SVITC
When SD SDI is selected:
INT
EXT_L
VITC
F5
RUN MDToggle No. 504
RUN MODERefer to the setup menu. RECFREE
F6
DF MODF i...

52
Function menus

Moving to registered points
The highlighting on the registered point display area is
moved by turning the ADJUST dial.  It is moved in the
ascending  order  of  points  when  the  dial  is  turned
clockwise and in the descending order of points when
it  is  turned  counterclockwise.   When  “AUTO”  has
been  selected  as  the  (PAGE)  setting  on  the
 menu, the highlighting can be moved
also to the previous or next page.
• Depending  on  the  setting  selected  for 
(ROTATE)  on  the...

53
Search mode
The  desired  search  point  can  be  selected,  and  the
tape can be prerolled to that point.
When the display page has been changed using the
[(PREV)  or  (NEXT)  button  on  the  
menu, the following applies depending on the setting
for  (PAGE) on the  menu.
When “MANU” is set: 
Both the search and registered points move to the top
of the changed page.
When “AUTO” is set: 
Only the search point moves to the top of the changed
page; the registered point does not move.
Cue point...

54
Function menus

*The underlining (__) denotes the factory setting mode.
Function
button/item Switching
method Corresponding setup
menu item
F1
PREVPress
___Description of setting
For multi-cue page forward scrolling.Setting
___
F2
NEXTPress
___For multi-cue page reverse scrolling.
___
F4
CLRPress
___For clearing the currently selected cue data.
ENTRY must be selected as the F3 (MODE) setting. ___
F5
AL CLRFi
Press___When MANU is selected by SHIFT + F3 (PAGE): All the cue
data on the currently...

55
Function menus

Warning display
When a warning occurs in this VTR, the warning mark
(W) blinks at the top left of the screen.  If  (WARN)
is  now  pressed,  the  details  of  the  warning  can  be
checked out on the LCD monitor.
When more than one warning has occurred, turn the
ADJ dial to scroll through the messages.
Hour-meter display
When  (HOURS)  is  pressed,  the  hour-meter
information can be checked out on the LCD monitor.F2
F1
Error log function
The error log mode can be selected by pressing...

56
Function menus
Function
button/item Switching
method Corresponding setup
menu item
F1
WARN___ ___Description of setting
For displaying the warning messages on the LCD monitor.Setting
___
F2
HOURS___ ___For displaying the hour-meter on the LCD monitor.
___
F1 (SHIFT)
STEPToggle No. 015
AUTO STEPRefer to the setup menu. OFFON
F2 (SHIFT)
CARDFi
Press___For calling the error log file operation menu.
___
F4 (SHIFT)
___ ___ ___ ______
F5 (SHIFT)
AL CLRFi
Press___For clearing error log files.
___
F3
______...

57
Function menus

*The underlining (__) denotes the factory setting mode.
These  enable  movement  to  the  menu  screens  for
operations (adjustments, saving data onto or loading it
from the internal memory or IC cards) relating to the
SYSTEM and SETUP menus.
Function
button/item Switching
method Corresponding setup
menu item
F1
FILEFi
Press___Description of setting
For calling the operation menu for saving the SYSTEM and
SETUP adjustment values (in the internal memory).Setting
___
F2
CARDFi...

58
Function menus

Function
button/item Switching
method Corresponding setup
menu item
F1
ASSEMToggle 
___Description of setting
For setting the editing mode to ON or OFF.
When  the  display  is  highlighted,  the  ASSEMBLE  editing
mode is set to ON, and the ASSEM button lights.Setting
OFF
ON
F2
______ ___ ______
F3
______ ___ ______
F4
______ ___ ______
F5
______ ___ ______
F6
______ ___ ______
*The underlining (__) denotes the factory setting mode.
The  ASSEMBLE  editing  mode  is  selected  on  this...

59
Function menus

Registering the edit points
After  the  edit  IN  and  OUT  points  have  been
registered, the  and  buttons light.
Automatic editing and manual editing
• When  the  editing  mode  has  been  selected  (the
button  is  lighted),  automatic  editing  or
manual  editing  can  be  performed  even  after  the
INSERT screen has been exited.
• After  the  edit  IN  and  OUT  points  have  been
registered (the  and  buttons are lighted),
the tape can be prerolled to an IN point or cued up
to...

60
Function menus

Selecting the menu items
Select  the  menu  item  by  turning  the  ADJ  dial.
(The cursor is moved down when the dial is turned
clockwise  and  up  when  it  is  turned  counter-
clockwise.)
• Forward  or  reverse  page  scrolling  (SETUP
menu only)
The menu list is organized by category, and the
pages can be scrolled in the forward or reverse
direction on a category by category basis.
(:
PREV),  (;
NEXT)
  
The  screen  may  continue  to  scroll  for  a  few
moments after the ADJ...