Panasonic Digital Hd Video Cassette Recorder Ajhd1700 Operating Instructions

101
Setup menus
The underlining (__) denotes the factory setting mode.
 (continued)
No./Item Description of settingNo./Item Description of setting
739
CH2 CUE SELFor  selecting  the  CH2  output  status  of  the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
740
CH3 CUE SELFor  selecting  the  CH3  output  status  of  the
main signal line in...

102
749*1
AUDIO PB VRFor  selecting  whether  the  playback  level
adjustment controls are to function in the EE
mode when INT SG has been selected on the
 function menu.
0000DIS:The INT SG output level is fixed
at the UNITY level.
0001 ENA:The INT SG output level can be
varied using the playback level
adjustment controls.
Setup menus
The underlining (__) denotes the factory setting mode.
 (continued)
No./Item Description of settingNo./Item Description of setting
750
ANA CH1 SELFor selecting the signal...

103
Setup menus
 (continued)
No./Item Description of settingNo./Item Description of setting
763
METER
SCALE
(This menu is
not displayed for
AJ-HD1700E.)
For selecting the scale display of the audio
level meter.
0000PEAK_0:
[The audio level is displayed with 0 dB as the
maximum level.
0001 REF_0:
The audio level is displayed with 0 dB as the
reference level.
Audio outputs in the search modeThe table below lists the signals which are output to the monitor and main signal line and which are determined by...

104
Setup menus
The underlining (__) denotes the factory setting mode.

No./Item Description of setting
A02
P. ON LOADThis  VTR  is  equipped  with  VTR  MEMORY
for storing the current settings (*1) and VTR
MEMORY  to  for  backing  up  VTR
MEMORY .    The  data  of  a  selected  VTR
MEMORY  to  can  be  loaded  into  VTR
MEMORY  and  operation  started  on  the
basis of this data when the power is turned
on.
0000OFF:
Operation  is  started  using  the  previous
settings.
0001 USER1:
The  VTR  MEMORY...

105
Setup menus
Follow the steps below to switch the system frequency (59/60 Hz, 50 Hz, 23/24 Hz, 25 Hz (HD) or 25 Hz(SD)).

1Following  the  procedure  for  the   (page 60) to change the
system menu item No.25 (SYSTEM FREQ) setting.
2Press  (SET) to enter the setting, and after the
function menu shown on the time code display area
>has  been  cleared,  the  following  message
appears.
F5
3To make the setting entered in step 2 valid, press
the  button while holding down the  button.
The  system  is...

2F
106
2F 2F
Setup menus

The  system  menu  and  setup  menu  have  some  items  whose  settings  differ  and  other  items  with  which  no
selection options are displayed and whose settings are fixed (indicated by the shading in the table below),
depending on the switching of the operation mode in response to the setting selected for system menu item
No.25 (SYSTEM FREQ).  (Refer to the table below.)
 50-pin connector registration
• When  the  items  whose  settings  differ  have  been
registered  in...

60/24
107
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)
d
12h
24h
Same as for
59/60002 TAPE TIMER
OFF
ON004 SYNCHRONIZE
MANUAUTO 010 MONI CONTROL
0s to 3sto 5s 012 REC ADJUST
OFF
ON 013 DET STOP
AUTOINPUT
HD_REF
SD_REFHD_REF
Same as for
59/60Same as for
59/60 031 OUT REF
S/F/RSTOP 105 AUTO EE SEL
NORMALTHRU 107 EE MODE SEL
OFFON 111 MEMORY STOP
OFFALL
PRE
NORMAL
V/CTLALL ALL 113 REC INH
RECOFF 115 EJECT SW INH
OFF
ON118 SP MODE INH
OFFLOW
HIGH 135 DET BEEP
EETAPETAPETAPE...

OFFOFFSame as for
59/60
PRE PRE 50
Same as for
59/60
108
BLANK
THRUBLANK BLANK 500 VITC BLANK
Setup menus
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 25 (HD) 25 (SD)
N-DEF
CH1
CH2
CH1+3
320 EDIT RPLCE1
321 EDIT RPLCE2
322 EDIT RPLCE3
323 EDIT RPLCE4
Same as for
59/60 324 EDIT RPLCEC
REGEN
PRE
AUTOPRE 503 TCG  MODE
TC&UBTC
UB 505 TCG REGEN
AS&INASSEM
INSRT 506 REGEN MODE
INTEXT_L
SLTC
SVITC 507 TC SOURCEREC
FREE 504 RUN MODE
NDF
V OUT
TC IN 512 TC OUT REF
DFNDFNDF NDF 511 DF...

109
Setup menus
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)25 (SD)
The underlining (__) denotes the factory setting mode.BLANK
1080i720p
- - - 634 480p #
HD OUT
480p480p
480i 635 480p #
SD OUT
1080i720p
- - - 636 480i #
HD OUT
480i480i
480p 637 480i #
SD OUT
FIT_V
FIT_H
FIT_HV
Same as for
59/60 638 IN U/C MODE
STDNARROW 639 I U/C RESP H
STDNARROW 640 I U/C RESP V
Pb-Pr
U-V
Same as for
59/60 651 HUE STYLE
OFFON 676 BLK CLIP
BLANK
THRUBLANK BLANK 680 CC (F1) BLANK
BLANK...

Same as for
59/6025 (SD)
110
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)
Setup menus
The underlining (__) denotes the factory setting mode.
719 CH7 IN SEL
720 CH8 IN SEL
AESSDI 721 D IN SEL 12
722 D IN SEL 34
723 D IN SEL 56
724 D IN SEL 78
CH1 to CH3i
4 725 REC CH1726 REC CH2
727 REC CH3
728 REC CH4
CH5 to CH7i
8 729 REC CH5
730 REC CH6
731 REC CH7
732 REC CH8
CUEto CH1j
8 733 REC CUE
AUTOCUT
FADECUT CUT 734 PB FADE
DIS
ENA 749 AUDIO PB VR
OFFON 760 REC PT MUTE
TONE...