Panasonic Digital Hd Video Cassette Recorder Ajhd1700 Operating Instructions

							101
Setup menus
The underlining (__) denotes the factory setting mode.
 (continued)
No./Item Description of settingNo./Item Description of setting
739
CH2 CUE SELFor  selecting  the  CH2  output  status  of  the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
740
CH3 CUE SELFor  selecting  the  CH3  output  status  of  the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
745
CH8 CUE SELFor  selecting  the  CH8  output  status  of  the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
741
CH4 CUE SELFor  selecting  the  CH4  output  status  of  the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
742
CH5 CUE SELFor  selecting  the  CH5  output  status  of  the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
743
CH6 CUE SELFor  selecting  the  CH6  output  status  of  the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
746
MONI CH SELFor selecting the monitor output.0000 MANU:
The signal selected by the MONITOR SELECT
button is output.
0001AUTO:
The PCM audio signal is output in the j
1.0k
to i
2.0k
speed  range;  the  CUE  signal  is
automatically output at all other speeds.
0002 PCM:
The PCM audio signal is output in the j
32k
to
i
32k
speed range.

• When “AUTO” is selected and a tape in any format
except  DVCPRO  HD-LP  is  played  back,  the  PCM
audio signals are output in the -1.0
kto +1.1kspeed
range.
• This setting takes effect when the L and R MONITOR
SELECT  switches  on  the  VTR’s  front  panel  have
selected a channel from CH1 to CH8.  
(If they have selected CUE, the CUE signal is output
at all speeds regardless of this menu item’s setting.)
747
MON AUTO
SELFor  selecting  the  channel  for  the  monitor
output to be switched to CUE.
When  a  setting  other  than  “MANU”  has  been
selected for setup menu item No.746 (MONI CH
SEL), the CUE signal is automatically output to
the  monitor  output  in  accordance  with  the
operation mode, and the monitor channel to be
switched to CUE is selected automatically.
0000L/R:The CUE signal is output both
to the Lch and Rch.
0001 L:The CUE signal is output to the
Lch only.
0002 R:The CUE signal is output to the
Rch only.
744
CH7 CUE SELFor  selecting  the  CH7  output  status  of  the
main signal line in the search mode.
0000OFF:
The CUE signal is not output.
0001 ON:
The CUE signal is output.

For details on the audio output statuses, refer to “Audio
outputs in the search mode” on page 103.
748
MONI SEL INHFor selecting whether to enable or inhibit the
operation of the MONITOR SELECT button on
the front panel.
0000OFF:The  button’s  operation  is
enabled.
0001 ON:The  button’s  operation  is
inhibited.
0002 ON1:In  the  FULL  display  mode,
operation  is  prohibited;  in  the
FINE  display  mode  only,
operation is enabled.

Whether to enable or inhibit the button’s operation can
be selected for channels whose signals have not been
mixed  by  the  setup  menu  item  No.737  (MONI  MIX)
setting. 
						

							102
749*1
AUDIO PB VRFor  selecting  whether  the  playback  level
adjustment controls are to function in the EE
mode when INT SG has been selected on the
 function menu.
0000DIS:The INT SG output level is fixed
at the UNITY level.
0001 ENA:The INT SG output level can be
varied using the playback level
adjustment controls.
Setup menus
The underlining (__) denotes the factory setting mode.
 (continued)
No./Item Description of settingNo./Item Description of setting
750
ANA CH1 SELFor selecting the signal to be output to analog
output CH1.
0000CH1:The CH1 signal is output. 
0001 CH5:The CH5 signal is output
751
ANA CH2 SELFor selecting the signal to be output to analog
output CH2.
0000CH2:The CH2 signal is output. 0001 CH6:The CH6 signal is output. 
752
ANA CH3 SELFor selecting the signal to be output to analog
output CH3.
0000CH3:The CH3 signal is output. 0001 CH7:The CH7 signal is output. 
753
ANA CH4 SELFor selecting the signal to be output to analog
output CH4.
0000CH4:The CH4 signal is output. 0001 CH8:The CH8 signal is output. 
754
SD SDI CH1
SLFor  selecting  the  audio  CH1  signal  to  be
superimposed onto the SD SDI output.
0000CH1:The CH1 signal is output.0001 CH2:The CH2 signal is output.0002 CH3:The CH3 signal is output.0003 CH4:The CH4 signal is output.0004 CH5:The CH5 signal is output.0005 CH6:The CH6 signal is output.0006 CH7:The CH7 signal is output.0007 CH8:The CH8 signal is output.757
SD SDI CH4
SLFor  selecting  the  audio  CH4  signal  to  be
superimposed onto the SD SDI output
0000 CH1:The CH1 signal is output.0001 CH2:The CH2 signal is output.0002 CH3:The CH3 signal is output.0003CH4:The CH4 signal is output.0004 CH5:The CH5 signal is output.0005 CH6:The CH6 signal is output.0006 CH7:The CH7 signal is output.0007 CH8:The CH8 signal is output.
758
JOG PROCFor selecting how to process the digital audio
output slow signals in the JOG, VAR or SHTL
mode.
0000 OFF:
The  sound  without  having  the  digital  audio
output slow signals processed is output even
when the STILL mode is established.
0001ON:
The sound after having the digital audio output
slow signals processed is output.
759
DV PB ATTFor selecting the audio output level during DV
format playback.
0000 OFF:
The audio output level is not attenuated.
0001ON:
The audio output level is attenuated.
760*
1
REC PT MUTEFor  selecting  whether  to  mute  the  sound  at
the  joins  between  recordings  during  DV  or
DVCAM format playback.0000OFF:The sound is not muted. 
0001 ON:The sound is muted.
761*
1
AUDIO INT SGFor selecting the type of internal signal.
0000TONE:A sine wave signal is selected.0001 SILNCE:A silent signal is selected.
755
SD SDI CH2
SLFor  selecting  the  audio  CH2  signal  to  be
superimposed onto the SD SDI output
0000 CH1:The CH1 signal is output.0001CH2:The CH2 signal is output.0002 CH3:The CH3 signal is output.
0003 CH4:The CH4 signal is output.0004 CH5:The CH5 signal is output.0005 CH6:The CH6 signal is output.
0006 CH7:The CH7 signal is output.0007 CH8:The CH8 signal is output.
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting. 756
SD SDI CH3
SLFor  selecting  the  audio  CH3  signal  to  be
superimposed onto the SD SDI output
0000 CH1:The CH1 signal is output.0001 CH2:The CH2 signal is output.0002CH3:The CH3 signal is output.
0003 CH4:The CH4 signal is output.0004 CH5:The CH5 signal is output.0005 CH6:The CH6 signal is output.0006 CH7:The CH7 signal is output.
0007 CH8:The CH8 signal is output.762
AUD RATE
CONThis item enables signals to be recorded and
played  back  without  passing  them  through
the  rate  converter  in  the  audio  input/output
section (without engaging the digital filter).
0000 OFF:
The  signals  are  recorded  and  played  back
without  passing  them  through  the  rate
converter.
0001ON:
The signals are recorded and played back after
passing them through the rate converter.

•ON/OFF  control  is  exercised  at  the  same  time  for
both  recording  and  playback.    It  cannot  be  set
differently for recording or playback.
•ON/OFF  control  is  exercised  at  the  same  time  for
CH1  to  CH8.    ON  or  OFF  cannot  be  set
independently for each channel.
•When the rate converter is set to OFF, the video input
signals  and  AES  (EBU)  input  signals  must  be
synchronized.  Moreover, the video input signals and
reference signal selected by OUT REF must also be
synchronized.  (Noise may occur if these signals are
not synchronized.)
•In the 60 Hz mode, noise may occur if OFF is set for
the rate converter. 
						

							103
Setup menus
 (continued)
No./Item Description of settingNo./Item Description of setting
763
METER
SCALE
(This menu is
not displayed for
AJ-HD1700E.)
For selecting the scale display of the audio
level meter.
0000PEAK_0:
[The audio level is displayed with 0 dB as the
maximum level.
0001 REF_0:
The audio level is displayed with 0 dB as the
reference level.
Audio outputs in the search modeThe table below lists the signals which are output to the monitor and main signal line and which are determined by how the settings of menu
items No.738 to No.745, and No.746 and No.747 are combined.791
CUE PB VOLFor adjusting the playback level of the CUE
audio signal.
(j¶
to 0 dB to i
12 dB)
0032 16
::
0016
0::
0000j16
*3: During  fast  forwarding  or  rewinding,  the  CUE  signal  is  output
automatically. 
*4: During fast forwarding or rewinding, this signal is muted.
*5: This item is not displayed when the 23/24 Hz mode or 25 Hz (HD
or SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
L/R
L
RCUE*2
CUE*2
PCM*1
CUE*2
PCM*1
CUE*2
CUE*2CUE*2
CUE*2PCM*1
PCM*1
PCM*4
CUE*2
PCM*3
PCM*4
PCM*3
AUTO
738 CH1 CUE SEL:
:
745 CH8 CUE SEL
OFFMANU
AUTO
PCM
MANUL/R
L
R
L/R
L
R
L/R
L
R
L/R
L
R
L/R
L
RPC*
1PCM*1
CUE*2
CUE*2
PCM*1
PCM*3PCM*3
PCM*3PCM*3
PCM*1
CUE*2
PCM*1
CUE*2
PCM*1
PCM*1PCM*1
PCM*4PCM*4
PCM*1PCM*1
PCM*3PCM ON746
MONI CH
SEL747
MON AUTO
SELMonitor output  Main signal line output
CH1/CH3/CH5/CH7 Lch Rch CH2/CH4/CH6/CH8

*1: The PCM audio output is muted if the tape is played back at a
speed in the j
1.0k
to i
2.0k
range (or at a speed in the j
1.0k
to i
1.1k
range for a format other than DVCPRO HD-LP).
*2: In the case of the CUE audio output, the PCM signals are output
if  the  tape  is  played  back  at  a  speed  in  thej
j1.0k
to i
2.0k
range (or at a speed in the -1.0k
to +1.1k
range for a format
other than DVCPRO HD-LP).
The underlining (__) denotes the factory setting mode.790*
5
CUE REC VOLFor adjusting the recording level of the CUE
audio signal.
(j¶
to 0 dB to i
12 dB)0032 16
::
0016
0::
0000j16

This  item  is  not  displayed
when the 23/24 Hz mode has
been selected as the system
menu  item  No.25  (SYSTEM
FREQ) setting. 
						

							104
Setup menus
The underlining (__) denotes the factory setting mode.

No./Item Description of setting
A02
P. ON LOADThis  VTR  is  equipped  with  VTR  MEMORY
for storing the current settings (*1) and VTR
MEMORY  to  for  backing  up  VTR
MEMORY .    The  data  of  a  selected  VTR
MEMORY  to  can  be  loaded  into  VTR
MEMORY  and  operation  started  on  the
basis of this data when the power is turned
on.
0000OFF:
Operation  is  started  using  the  previous
settings.
0001 USER1:
The  VTR  MEMORY  data  is  loaded  and
operation started on the basis of this data.
0002 USER2:
The  VTR  MEMORY  data  is  loaded  and
operation started on the basis of this data.
0003 USER3:
The  VTR  MEMORY  data  is  loaded  and
operation started on the basis of this data.
0004 USER4:
The  VTR  MEMORY  data  is  loaded  and
operation started on the basis of this data.4
3
2
1
C41C41
C
*1: The  term  “settings”  here  denotes  all  the  settings  of  the  setup
menus,  what  is  registered  in  the  PF1/PF2  menus,  and  the
contents of some of the function buttons.

When the VTR is to be connected to a Dolby-E encoder/decoder for recording or playing back Dolby-E data, set
the audio input and output levels to UNITY, and select the following setup menu item settings.

• Dolby-E data cannot be recorded or played back in
the 60 Hz mode.
• Adjust the timing with the video signals to cover the
time  taken  by  the  Dolby-E  component  for
encoding/decoding outside the VTR.
• Set the bit depth of the Dolby-E encoder/decoder to
16 bits.
• Noise will be output from the ANALOG AUDIO OUT
connectors  of  the  channels  through  which  the
Dolby-E data is passing.
• The audio level meter will deflect beyond the range
of its markings for those channels through which
the Dolby-E data is passing.
• Noise will be output when a tape on which Dolby-E
data has been recorded is played back in the JOG
or VAR mode.
* Dolby and the Double D symbol Îare trademarks of
Dolby Laboratories Licensing Corporation.
No.303 AUD EDIT IN = CUT
No.304 AUD EDIT OUT = CUT
No.725 REC CH1 = CH1
No.726 REC CH2 = CH2
No.727 REC CH3 = CH3
No.728 REC CH4 = CH4
No.729 REC CH5 = CH5
No.730 REC CH6 = CH6
No.731 REC CH7 = CH7
No.732 REC CH8 = CH8
No.734 PB FADE = CUT
No.758 JOG PROC = OFF
No.762 AUD RATE CON = OFF 
						

							105
Setup menus
Follow the steps below to switch the system frequency (59/60 Hz, 50 Hz, 23/24 Hz, 25 Hz (HD) or 25 Hz(SD)).

1Following  the  procedure  for  the   (page 60) to change the
system menu item No.25 (SYSTEM FREQ) setting.
2Press  (SET) to enter the setting, and after the
function menu shown on the time code display area
>has  been  cleared,  the  following  message
appears.
F5
3To make the setting entered in step 2 valid, press
the  button while holding down the  button.
The  system  is  restarted,  and  the  VTR  starts
operating in the selected mode.
FENT
4To cancel the setting entered in step 2, press the
button while holding down the  button.
The  above  message  is  cleared,  and  after  the
changed setting has been restored to the original
system  menu  No.25  (SYSTEM  FREQ)  setting,
operation returns to the SYSTEM menu operation
screen.
FC
  
If  the  system  menu  No.25  (SYSTEM  FREQ)  setting
has been changed while a cassette is inserted in the
VTR, the cassette is automatically ejected.
The same procedure as above is also followed when
the system menu No.25 (SYSTEM FREQ) setting has
been changed by loading the data from an IC card in
accordance with the  procedure (page 69).
Note that even if the change being made to the system
menu item No. 25 setting is cancelled, other system
menu items affected by the change will be updated, as
will the associated file names.
F1SHIFTF2F3F4F5F6
No.25
SYSTEM
FREQFormat enabling recording Format enabling playback Sync signals
50/601080/59.94i (HD_LP)
1080/60.00i (HD_LP)
720/59.94p (HD_LP)
720/60.00p (HD_LP)1080/59.94i (HD_LP, HD_SP)
1080/60i (HD_LP, HD_SP)
720/59.94p (HD_LP, HD_SP)
720/60.00p (HD_LP, HD_SP)
480/59.94p (480p)
480/59.94i (422, 411, DV, DVCAM)The  setting  selected  for  setup  menu
item No.031 (OUT REF) applies. HD_REF (59.94Hz, 60Hz)
SD_REF (59.94Hz)
501080/50i (HD_LP)1080/50i (HD_LP, HD_SP)
576/50i (422, 411, DV, DVCAM)
576/25p over 50i (422, 411, DV)HD_REF (50Hz)
SD_REF (50Hz)
23/24None720/23.98p over 59.94p (HD_SP/HD_SP)
720/24p over 60.00p (HD_SP/HD_SP)
480/23.98p over 59.94i [2:3 mode]
480/23.98p over 59.94i [2:3:3:2 advance mode]HD_REF (47.96Hz, 48Hz) The  setting  selected  for  setup  menu
item No.031 (OUT REF) applies.
25 (HD)None 720/25p over 60pHD_REF (50Hz)
SD_REF (50Hz)
25 (SD)None 720/25p over 60p SD_REF (50Hz)
The  setting  selected  for  setup  menu
item No.031 (OUT REF) applies.
 
						

							2F
106
2F 2F
Setup menus

The  system  menu  and  setup  menu  have  some  items  whose  settings  differ  and  other  items  with  which  no
selection options are displayed and whose settings are fixed (indicated by the shading in the table below),
depending on the switching of the operation mode in response to the setting selected for system menu item
No.25 (SYSTEM FREQ).  (Refer to the table below.)
 50-pin connector registration
• When  the  items  whose  settings  differ  have  been
registered  in  the    50-pin  connector
pins,  the  settings  corresponding  to  the  operation
modes are allocated to the IN and OUT pins on the
basis of the setting numbers.  However, when the
upper  limit  value  is  exceeded,  the  value  will  be
limited to this upper limit.
What has been registered is saved, but bear in mind
that when the data is registered again, it is saved by
overwriting the existing data so that the previously
registered data will be lost.
• If items, whose selection options are not displayed
due to  the operation mode, have been registered in
the    50-pin  connector,  when  an
operation  mode  in  which  these  options  are  not
displayed is selected, what has been registered is
saved but no operation is possible.  Bear in mind,
however, that when the data is registered again, it is
saved  by  overwriting  the  existing  data  so  that  the
previously registered data will be lost. System menu and setup menu settings
• Each of the items whose settings differ is saved in
the  VTR  MEMORY  (current  file  and  one  of  the
backup files 1 to 4).  The settings that correspond to
each operation mode will be displayed so that the
settings can be performed for each operation mode.
Registration  of  the    and    function
buttons
• When  the  items  whose  settings  differ  have  been
registered in the  and  function buttons,
the settings that correspond to each operation mode
will be displayed so that the settings can be performed
for each operation mode.
• If items, whose selection options are not displayed due
to    the  operation  mode,  have  been  registered  in  the
  or    function  button,  when  an  operation
mode  in  which  these  options  are  not  displayed  is
selected,  what  has  been  registered  is  saved  but  the
function button itself will become blank and cannot be
operated.  Bear in mind, however, that when the data is
registered again, it is saved by overwriting the existing
data so that the previously registered data will be lost
.
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)
14 12 SYS H (HD)COARSE
j
5H to 0H to 5Hj
5H to 0H to 5H
FINE
j
1100 to 0 to 1100
j
5H to 0H to 5H
j
1375 to 0 to 1375j
1320 to 0 to 1320
15 VO SYS H (SD)COARSEj
5H to 0H to 5Hj
5H to 0H to 5H
FINEj
858 to 0 to 858j
864 to 0 to 864
16 SD SYS D (SD)COARSEj
5H to 0H to 5Hj
5H to 0H to 5H
FINEj
858 to 0 to 858j
864 to 0 to 864 SYS SC (SD)j
108 to 0 to 108j
115 to 0 to 115
System menu
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)
5022F
/4F 2F/4F/8F 109 CAP.LOCK
501 VITC POS-1
VITC POS-2
600 VIDEO IN SEL
10L to 16Lto 20L
INTSG
HDSDI
SDTI
SDSDI
7L to 11Lto 22L
INTSG
HDSDI
SDSDI25 (SD)
7L to 11Lto 22L
10L to 18Lto 20L7L to 13Lto 22L 7L to 13Lto 22L
Setup menus
(Continued on next page)
25 (SD)
The underlining (__) denotes the factory setting mode. 
						

							60/24
107
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)
d
12h
24h
Same as for
59/60002 TAPE TIMER
OFF
ON004 SYNCHRONIZE
MANUAUTO 010 MONI CONTROL
0s to 3sto 5s 012 REC ADJUST
OFF
ON 013 DET STOP
AUTOINPUT
HD_REF
SD_REFHD_REF
Same as for
59/60Same as for
59/60 031 OUT REF
S/F/RSTOP 105 AUTO EE SEL
NORMALTHRU 107 EE MODE SEL
OFFON 111 MEMORY STOP
OFFALL
PRE
NORMAL
V/CTLALL ALL 113 REC INH
RECOFF 115 EJECT SW INH
OFF
ON118 SP MODE INH
OFFLOW
HIGH 135 DET BEEP
EETAPETAPETAPE 140 OUTPUT
REC
PB
AUTO
141 VOLUME
IN
OUT
IN/OUT
142 AUDIO UNITY
PBPB
OUTOUT
CUT
FADE303 AUD EDIT IN
CUT
FADE304 AUD EDIT OUT
PLAYER
RECORDER 306 CF ADJ SELALL
TAPE
PB
OUT
j
8f to 0fto 3s10f014 DET ADJUST
Setup menus
59/2360/24Same as for
59/6060/24 030 HD FREQUENCY
1080i720p720p 1080i 720p25 (SD)
SD_REF720p 020 SYS FORMAT
The underlining (__) denotes the factory setting mode. 
						

							OFFOFFSame as for
59/60
PRE PRE 50
Same as for
59/60
108
BLANK
THRUBLANK BLANK 500 VITC BLANK
Setup menus
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 25 (HD) 25 (SD)
N-DEF
CH1
CH2
CH1+3
320 EDIT RPLCE1
321 EDIT RPLCE2
322 EDIT RPLCE3
323 EDIT RPLCE4
Same as for
59/60 324 EDIT RPLCEC
REGEN
PRE
AUTOPRE 503 TCG  MODE
TC&UBTC
UB 505 TCG REGEN
AS&INASSEM
INSRT 506 REGEN MODE
INTEXT_L
SLTC
SVITC 507 TC SOURCEREC
FREE 504 RUN MODE
NDF
V OUT
TC IN 512 TC OUT REF
DFNDFNDF NDF 511 DF MODE000
to 111 508 BINARY GP
OFF
ON
510 TCG CF FLAG
OFFEDIT 516 TC OUT ADV
MOMENTLATCH 517 TCG OUT
100%CBto EQ 601 VIDEO INT SG
DR OFFDR ON 602 SDI IN MODE
FIELDFRAME 604 FREEZE SEL
OFF
AUTO605 INTERPOLATEOFF
FIT_V
FIT_H
FIT_HV
14:9
13:9 620 DOWNCON MODESame as for
59/60
FIT_V
FIT_H
FIT_HV 621 UPCON MODE
STD
NARROW 624 U/C RESP H
Same as for
59/60
The underlining (__) denotes the factory setting mode. 
						

							109
Setup menus
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)25 (SD)
The underlining (__) denotes the factory setting mode.BLANK
1080i720p
- - - 634 480p #
HD OUT
480p480p
480i 635 480p #
SD OUT
1080i720p
- - - 636 480i #
HD OUT
480i480i
480p 637 480i #
SD OUT
FIT_V
FIT_H
FIT_HV
Same as for
59/60 638 IN U/C MODE
STDNARROW 639 I U/C RESP H
STDNARROW 640 I U/C RESP V
Pb-Pr
U-V
Same as for
59/60 651 HUE STYLE
OFFON 676 BLK CLIP
BLANK
THRUBLANK BLANK 680 CC (F1) BLANK
BLANK
THRUBLANK 681 CC (F2) BLANK
THRU
ADD22
ADD21
ADD20
Same as for
59/60
682
(525 system
only)VO SETUP (HD)
THRU
ADD22
ADD21
ADD20
683
(525 system
only
)VO SETUP (SD)
0 dB to +1 dBto 2 dB641 I U/C ENH H
0 dB to +1 dBto 2 dB
BLANK
BLANK 642 I U/C ENH V
1080i720p
1080i 630 1080i #
HD OUT
480i- - -
480p 631 1080i #
SD OUT
1080i
720p
720p 632 720p #
HD OUT
- - -
480i
480p 633 720p #
SD OUT
STDNARROW
Same as for
59/60Same as for
59/60 625 U/C RESP V
0 dB to +1 dBto 2 dB628 U/C ENH H
0 dB to +1 dBto 2 dB629 U/C ENH V 
						

							Same as for
59/6025 (SD)
110
Setup menus
No. Menu itemSystem menu No.25 (SYSTEM FREQ)
59/60 23/24 50 25 (HD)
Setup menus
The underlining (__) denotes the factory setting mode.
719 CH7 IN SEL
720 CH8 IN SEL
AESSDI 721 D IN SEL 12
722 D IN SEL 34
723 D IN SEL 56
724 D IN SEL 78
CH1 to CH3i
4 725 REC CH1726 REC CH2
727 REC CH3
728 REC CH4
CH5 to CH7i
8 729 REC CH5
730 REC CH6
731 REC CH7
732 REC CH8
CUEto CH1j
8 733 REC CUE
AUTOCUT
FADECUT CUT 734 PB FADE
DIS
ENA 749 AUDIO PB VR
OFFON 760 REC PT MUTE
TONE
SILNCESILNCE SILNCE 761 AUDIO INT SG
16 to 0to j
16 790 CUE REC VOLINT SG
DIGI
ANA 713 CH1 IN SEL
714 CH2 IN SEL
715 CH3 IN SEL
716 CH4 IN SEL
717 CH5 IN SEL
718 CH6 IN SEL
OFF
ON688 CC REC
Same as for
59/60
BLANKTHRU
MANU 695 BLANK LINE
4dB0dB
j
20dB 700 CH1 IN LV701 CH2 IN LV
702 CH3 IN LV
703 CH4 IN LV
4dB0dB
j
20dB
j
60dB 704 CUE IN LV
Same as for
59/60
OFFON 686 CCR MODE
OFFON 687 SDI INDEX O