Panasonic Digital Hd Video Cassette Recorder Ajhd1700 Operating Instructions

31
1Re-registering an edit point
Locate the new edit point by performing the jog or
shuttle operation, and press the IN (or OUT) button
and SET button at the same time to re-register the
edit point.
2Modifying an edit point in 1-frame increments
(trimming function)
Press the TRIM button while holding down the IN
(or OUT) button.
Each  time  the i
button  is  pressed,  the  point  is
moved ahead by one frame.
Conversely, each time the j
button is pressed, the
point is moved back by one frame.
3Resetting...

32
Automatic Editing (deck-to-deck)
Previewing
1After the edit points have been registered, press
the PREVIEW button.
Regular preview is now conducted.

• If the edit IN point has not been registered, the
position  where  the  PREVIEW  button  was
pressed is registered as the edit IN point.
• To  stop  the  preview  at  any  time,  press  the
STOP button.
• When  the  PREVIEW  button  is  pressed  again
after the IN point during the course of a preview,
the preview will start again from the beginning.
•...

33
1Upon completion of the editing, press the REVIEW
button.
Review is now started by the recorder.
• To stop the review at any time, press the STOP
button.
• When the edit OUT point is reached, the tape is
postrolled, after which it stops.
Reviewing
Automatic Editing (deck-to-deck)
POWEROFFON
HEADPHONES
PUSH
LOCKFULL
CH CONDITIONMONITORFULL/FINEREMOTELR9P50PRS-232CCH12345678CUE
XL/L/M-cassetteDo not insert S-cassette
without adapterEJECT
AUDIO CH SELECTSHIFTABC DEF GHI
JKL MNO PQRSPREVIEW/
REVIEWPRE-...

34
∫
Modifying the edit points
Video IN point:
While holding down the IN button, press the TRIMi
button or TRIMj
button.
Video OUT point:
While  holding  down  the  OUT  button,  press  the
TRIMi
button or TRIMj
button.
Audio IN point:
While  holding  down  the  A-IN  button,  press  the
TRIMi
button or TRIMj
button.
Audio OUT point:
While holding down the A-OUT button, press the
TRIMi
button or TRIMj
button.
∫
Cueing the tape up to the edit points
Cue-up to video IN point:
While  holding  down  the  IN...

35
Audio Split Editing 
∫
Duration display
The duration can be indicated on the display.
Between the video IN and OUT points: 
Press the IN button and OUT button at the same
time.
Between the audio IN and OUT points: 
Press  the  A-IN  button  and  A-OUT  button  at  the
same time.
Match frame processing function
When two VTRs are used to perform the audio split
editing  operations,  there  will  be  a  total  of  8  edit
points: the video IN and OUT points for the player,
the video IN and OUT points for...

36
Variable memory function
1Register the IN point using the SET button and IN
button.  There is no need to set the OUT point for
variable memory playback.
Variable memory playback operation procedure
The variable memory mode can be selected by setting
(VARMEM)  on  the    menu  to
“ON.”
When  (VARMEM)  is  set  to  “OFF,”  the  variable
memory mode is canceled, and the regular mode is
established.

Bear in mind that when the 23/24 Hz or 25 Hz (HD or
SD)  mode  has  been  selected  as  the  system  menu...

37
1Select the editing mode on the  or
 menu.
2Select  the  VTR  to  be  operated  by  pressing  the
RECORDER or PLAYER button.
3Register  the  IN  and  OUT  points  using  the  SET
button and IN and OUT buttons.  The player’s OUT
point cannot be registered.
4Press  the  PLAYER  button  to  select  the  player
VTR,  and  then  set  the  initial  speed  using  the
search dial while holding down the SET button.
5When  the  SET  button  and  PREVIEW/REVIEW
button are pressed at the same time, the tapes in...

38
Function menus
The function menus are used to set the functions which are frequently used.
The function menus are selected directly using the direct menu buttons on the front panel.
General description
General menus
, 
The most basic settings for recording, playback and
TC operations are set on these menu screens.
, 
The basic input/output settings for the video signals
are  performed  and,  moreover,  the  level  of  the  HD
output signals can also be adjusted on these menu
screens.
, ,  
The basic...

39
Function menus
Allocating the function keys
F1 F2 F3 F4 F5 F6Menu (6 types)  Menu hierarchyItems allocated to function keys
HOME1st  OUTPUT TC/CTL TC CLR R INH2nd (SHIFT)   PREROL OUTREF CAPSTN VARMEM
VIDEO1st  VID IN INT SG WFM UP CON DW CON2nd (SHIFT)  
3rd (F+SHIFT)V LV C LV HUESUP LV
BR CT R-BR B-BR R-CT B-CT
AUDIO1st  A1 IN A2 IN DIN 12 A3 IN A4 IN DIN 342nd (SHIFT)   A5 IN A6 IN DIN 56 A7 IN A8 IN DIN 78
3rd (SHIFT)   VOLUMERECCUE M MIX
TC1st  TC SRC TCG MD TCG RG RUN MD DF MOD2nd (SHIFT)...

40
Function menus
Toggle: 
Each time a function button is pressed, the setting is
changed or entered.
F i
toggle*: 
When a function button is pressed while the F button
is held down, the setting can be changed or entered
each time.
Toggle i
ADJ: 
When  a  function  button  is  pressed,  the  setting  is
highlighted, and the status in which the setting can be
changed is established.  
The ADJUST dial is used to change the setting.
When the same function button is pressed again and
the highlighting is...