Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions

41
 Search for a marked point and
play from that point (Marking
search)
Display the recording time of the recorded images with a
marked point in a list or a thumbnail and select the desired
recording time to play. Refer to page 24 for further informa-
tion about marking.
Note:Marking search is available only when HDD normal
area or event recording area is selected as the
recording area with the DISK SELECT window.
zPress the SEARCH button repeatedly until the
marking list window is displayed.
The result...

42
MONITOR LIVE IMAGES
It is possible to display live images on a single screen or a
multi-screen, or on a single sequential display (Displayed
images from cameras on a single screen will be automati-
cally switched.).
 Displaying Live Images on a
Single Screen
zPress the MONITOR1/MONITOR2 button to
select the monitor.
When monitor 1 is selected, the indicator will light.
When monitor 2 or the VGA monitor is selected, the indica-
tor will not light.
xPress a camera selection button 
(1 - 16 for the...

43
xPress the EL-ZOOM button to enlarge the dis-
played image.
The displayed image will be displayed with x2 zoomed
size.
Zooming level will change each time the EL-ZOOM button
is pressed.
x2 →x4 →OFF
Notes: 
• When an image is zoomed in on (x2 or x4), it is possible
to move the zoomed image using the arrows button.
• When any indicator of PAN/TILT, ZOOM/FOCUS, IRIS,
PRESET/AUTO is lit, it is impossible to use the EL-
ZOOM function.
 Displaying on a Multi-screen
It is possible to display images on a...

44
 Sequential Display
Displayed images from cameras will be switched automati-
cally.
Camera images will be displayed sequentially according to
the settings performed in advance.
zPress the MONITOR1/MONITOR2 button to
select the monitor.
When monitor 1 is selected, the indicator will light.
When monitor 2 is selected, the indicator will not light.
xPress the SHIFT button.
The SHIFT indicator will light.
cPress the SEQ button.
The camera selection button respective to the displayed
image will light...

45
CONTROL CAMERAS
When displaying live images, the following camera controls
are possible.
• Panning/Tilting: Moves a camera horizontally/vertically.
• Zooming: Zooms in/out on images.
• Focus: Adjusts the focus.
• Iris: Adjusts the iris of the lens.
• Preset Action: Moves a camera to the preset position
registered in advance.
• Auto Function: Moves a camera with an auto function
set in advance.
Notes:
• Controlling cameras is possible only when displaying
images on a single screen.
• Depending on...

46
xUse the arrows button (AB) to adjust the
focus.
Press the arrows button (A) to shift the focus nearer.
Press the arrows button (B) to shift the focus farther.
Auto focus is available by pressing the SET button.
cPress the camera selection button ([1] - [16] for
the WJ-HD316A, [1] - [9] for the WJ-HD309A)
respective to the controlled camera channel to
quit the focusing operation.
 Iris
Adjusts the iris of the lens.
zPress the IRIS button.
The IRIS indicator will light.
xUse the arrows button (AB) to...

47
 Move a camera to the preset position
z
Press the PRESET/AUTO button.
The PRESET/AUTO indicator will light and the PRESET/
AUTO PAN window will be displayed.
xPress a camera selection button 
([1] - [10/0] for the WJ-HD316A, [1] - [9], [0] for
the WJ-HD309A) to select a desired preset
position.
Pressing the camera selection button [10/0] ([0] for the WJ-
HD309A) moves a camera to the home position.
The jog dial can also be used to select a preset position
number by rotating it.
cSelect OK using the...

48
When selecting CANCEL using the arrows button and
press the SET button, the PRESET/AUTO PAN window will
be closed.
 Auto Function (Auto Pan, etc)
Moves a camera with an auto function set in advance.
Important:
When monitor 1 is selected, it is impossible to move a
camera with an auto function by performing the follow-
ing steps.
In this case, perform the settings using the setup menu
of camera.
zPress the PRESET/AUTO button.
The PRESET/AUTO indicator will light and the PRESET/
AUTO PAN window will be...

49
Event Action
ABOUT THE EVENT FUNCTION
The event action will be performed when the following
events occur.
•Motion detection:When motion is detected by the
motion detection function (see below), this is stated as
an event of motion detection.
•Video Loss:When a video signal supply is stopped
because of a cable disconnection or malfunction of a
camera, this is stated as an event of video loss.
•Terminal alarm:When a signal is supplied from an
external device such as a door sensor to the ALARM
terminal,...

50
Alarm Function
 Blinks the ALARM indicator on the front
panel
 Switches from the images displayed on
monitor 1 and monitor 2 to the images from
the location of the alarm occurrence (on a
single screen) Displays the event information in the alarm
display area on monitor 1 and the camera
title display area on monitor 2


 Sounds the buzzer
Contact a system administrator about sounding duration.
 Announces an event occurrence to the con-
nected system device (Alarm Output)
Sends a signal to the...