Panasonic Digital Disk Recorders Wj Hd309a Operating Instructions

31
cFilter recording events.
Filter recording events by time and date
Move the cursor using the arrows button and rotate the jog
dial to enter the time and date.
Press the SET button to determine the entered time and
date.
The recording event in the entered time range will be listed
and displayed.
Filter recording events by camera channel
Select camera channel numbers (1 - 16 for the WJ-
HD316A, 1 - 9 for the WJ-HD309A) using the arrows button
to move the cursor, and rotate the jog dial to apply...

32
nTo stop playback, press the STOP button.
The indicator on the PLAY/PAUSE button will go off and
playback will be stopped.
Live images will be displayed on monitor 2 and the VGA
monitor.
R
2 R
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH
SETUP
/ESCPAN/TILTSLOWA-B
REPEATGOTO
LAST
LISTED ZOOM/
FOCUS
IRIS
PRESET
/AUTO
SET
–
+
n
PAN/
TILT
 Search for Copied Recorded Images and...

33
 Copy Data Thumbnail Window
Time and date:The time when copying of the recorded images had started will be displayed.
Camera channel:The camera channel of the copy data file will be displayed. The recorded image of the
displayed camera channel will be played on a single screen. The recording mode also
will be displayed.
Notes:
• Some images displayed in the thumbnail window may not match with their respective displayed recorded time due to play-
ing of compressed recorded images.
• When no image file...

34
zPress the SEARCH button repeatedly until the
copy data file list window is displayed.
The copy data file list window will be displayed on monitor
2 and the VGA monitor.
Use the arrows button (CD) to switch between displaying
the list window and the thumbnail window alternately.
To search using a search filter, go to step 4.
R
2 R
LOGOUT
MONITOR1
MONITOR2
5
9
2
6
10/0
14 13
3
7
11
SHIFT SEQ
COPYDISK SELECT
EL-ZOOM
TEXT
LOGOUT
4
8
12
OSD
MARK
1
15 16BUSY316
REV FWDSTOPPLAY PAUSEREC - REC STOP
SEARCH...

35
cFilter copy data files.
Filter copy data files  by time and date
Move the cursor using the arrows button and rotate the jog
dial to enter the time and date.
Press the SET button to determine the entered time and
date.
The copy data file in the entered time range will be listed
and displayed.
Filter copy data files by camera channel
Select camera channel numbers (1 - 16 for the WJ-
HD316A, 1 - 9 for the WJ-HD309A) using the arrows button
to move the cursor, and rotate the jog dial to apply filtering....

36
Search for a motion detected
time and date from the recorded
images and play it (VMD search)
Note:This feature is available only when HDD NORMAL/
EVENT AREA or HDD COPY AREA is selected with
the DISK SELECT window. When COPY 1 or COPY 2
is selected, this feature is not available. Refer to page
25 for further information about the DISK SELECT win-
dow. 
Search for a motion detected time and date from all the
images recorded in all the recording modes, and display a
list or a thumbnail of the results....

37
xPress the SET button.
The VMD search window will be displayed.
Enter a camera channel number and time range on the
VMD search window for the VMD search.
To search using the same conditions as the previous
search, press the PLAY/PAUSE button.
Go to step 13 when the VMD search is performed and a list
of the results is displayed after the PLAY/PAUSE button is
pressed. 
cMove the cursor using the arrows button and
rotate the jog dial to enter the camera channel
number and time range for the VMD search....

38
.Move the cross cursor to the motion detection
area to apply the sensitivity using the arrows
button (DCAB).
⁄0Select the sensitivity using the jog dial from
the following.
OFF:Motion will not be detected
LOW:Low sensitivity
MID:Standard sensitivity
HIGH:High sensitivity
Note:Depending on the set positions of each motion
detection area, the sensitivity parameters for the motion
detection areas may be displayed overlapped with
each other.
⁄1After completing the sensitivity settings for the
detection...

39
⁄3Move the cursor to select a detection mode
using the arrow buttons and rotate the jog dial
to check the radio button next to the selected
detection mode. Press the SET button to deter-
mine the selection.
Refer to page 40 for further information about each of the
detection modes.

Move the cursor to the parameter box using the arrows but-
ton (C) to select a masking duration from the following.
1 s/1 min/1 h/24 h

Move the cursor to an area for the settings of VECTOR
using the arrows button (C) and...

40
Any motion will be detected anywhere in the A, B, C, D
areas.
Note:In the ANY AREA mode, it is possible to set the
masking duration. When the masking duration is set,
motion will be ignored for a certain period (set duration
as the masking duration) in the same area. It is conve-
nient to set the masking duration to make the subject
period shorter in case it is necessary to search an
extended time range or when searching through many
results.

It will be subject to listing if an object moves within...