Panasonic Digital Color Imaging Systems For Scanner And Email Dp C266 Operating Instructions

							51
 Chapter 3    Scanner Settings
Memo 
						

							52
 Chapter 3    Scanner Settings
Advanced Color Quality Settings
The following picture qualities can be adjusted:
• Compression (Full Color)
• Compression (Grayscale)
• Compression (Black)
• Background Removal
• BleedThrough Prevention
• Contrast
• Sharpness
zThe standard settings of “Compression (Full Color)”, “Compression (Grayscale)”, “Compression (Black)”, 
“Background Removal”, “BleedThrough Prevention”, “Contrast” and “Sharpness” can be changed. Refer 
to Scanner Settings in the Operating Instructions (For Function Parameters) of provided CD-ROM.
zThe picture quality settings are reset to their default settings when:
- The Reset key is pressed.
- The Auto Reset Time interval has lapsed (default = 1 min).
- The power is turned OFF.
- A scan job is completed.
Compression (Full Color)
Select picture quality in the Full Color mode.
1Select “Adjustment”.
zIf the above screen is not displayed, see 
steps 1 to 3 on page 48.
2Select “Compression (Full Color)”.
3Select a picture quality, and then select 
“
OK”.
Transferring 
SpeedFaster Standard Slower
Picture 
QualityLower Standard Higher 
						

							53
 Chapter 3    Scanner Settings
4Select “OK”. 
						

							54
 Chapter 3    Scanner Settings
Compression (Grayscale)
Select picture quality in the Grayscale mode.
1Select “Adjustment”. (See page 52)
2Select “Compression (Grayscale)”.
3Select a picture quality, and then select 
“
OK”.
4Select “OK”.
Compression (Black)
Select the compression method in the Black 
mode.
1Select “Adjustment”. (See page 52)
2Select “Compression (Black)”.
3Select a compression method, and 
then select “OK”.
4Select “OK”.
Transferring 
Sp ee dFaster Standard Slower
Picture 
QualityLower Standard Higher
MHModified Huffman format: 
Lowest compression
MRModified Read format: Higher 
compression than MH
MMRModified MR format: Higher 
compression than MR
JBIGJoint Bi-level Image format: 
Higher compression than MMR 
						

							55
 Chapter 3    Scanner Settings
Background Removal
Color documents can be scanned with their 
background color removed. This feature is 
convenient for scanning newspapers, background-
colored documents or the like.
zWhen the Photo original is selected in the Original 
Type (see page 49), the setting of Background 
Removal is invalid.
zWith the Background Removal function, if a 
Compressed PDF is specified as a file type, 
levels 1 - 6 can be selected. However, normally 
only levels 4 - 6 are available.
1Select “Adjustment”. (See page 52)
2Select “Background Removal”.
3Adjust the Background Removal level 
with “-” and “+”, and then select “OK”.
4Select “OK”.
BleedThrough Prevention
Thin sheets of original can be scanned without 
bleeding through.
zWhen the Photo original is selected in the Original 
Type (see page 49), the setting of BleedThrough 
Prevention is invalid.
1Select “Adjustment”. (See page 52)
2Select “BleedThrough Prevention”.
3Adjust the BleedThrough Prevention 
level with “-” and “+”, and then select 
“OK”.
zIf you set the Background Removal to “Off”, 
the BleedThrough Prevention will not be 
adjustable.
4Select “OK”.
+Background color is lighter.
-Background color is darker.
(6 steps)
+For greater prevention effect
-For less prevention effect
(6 steps) 
						

							56
 Chapter 3    Scanner Settings
Contrast
The scanning contrast can be adjusted to match 
the original.
1Select “Adjustment”. (See page 52)
2Select “Contrast”.
3Adjust the contrast level with “Lower” 
or “Higher”, and then select “OK”.
4Select “OK”.
Sharpness
Originals can be scanned with the outline of the 
image softened or sharpened.
1Select “Adjustment”. (See page 52)
2Select “Sharpness”.
3Adjust the Sharpness with “Lower” 
and “Higher”, and then select “OK”.
4Select “OK”.
LowerFor darker original
HigherFor lighter original
Higher
Lower
LowerDecreases sharpness.
HigherIncreases sharpness.
Lower
Higher 
						

							57
 Chapter 3    Scanner Settings
Memo 
						

							58
 Chapter 3    Scanner Settings
Setting the File Type and/or File Name
Documents can be scanned with a file type specified. While files are named after the date by default, 
documents may also be scanned with a file name specified.
zThe standard setting of File Type can be changed. Refer to Scanner Settings in the Operating Instructions 
(For Function Parameters) of provided CD-ROM.
zThe “File Type and Name” setting is reset to its standard setting when:
- The Reset key is pressed.
- The Auto Reset Time interval has lapsed (default = 1 min).
- The power is turned OFF.
1Press the Scan/Email key.
2Select “Basic Menu”.
3Select “File Type and Name”.
4Select a file type.
When “Black” is selected in “Quality Adj.”, 
“TIFF” or “PDF” can be selected.
zWhen a Full Color or Gray scale type 
original is selected in the Color mode, only 
JPEG, PDF, or Compressed PDF file type 
can be selected.
zWhen a Black type original is selected in the 
Color mode, only TIFF or PDF file types can 
be selected.
zWhen “Compressed PDF” is selected, the 
selected Resolution will be automatically 
adjusted to 300 dpi.
zWhen “Compressed PDF” is selected, the 
selected “Compression (Full Color)” or 
“Compression (Grayscale)” will be 
automatically adjusted to “High Speed” (see 
pages 52 and 54).
JPEGSaved in the JPEG format. It 
is a compression image file 
format.
PDFSaved in the standard PDF 
format.
Compressed 
PDFPDF file format which is 
compressed at a higher 
compression ratio.
TIFFSaved with the monochrome 
image format.
PDFSaved with the standard PDF 
(monochrome) format. 
						

							59
 Chapter 3    Scanner Settings
5Select “Custom” to change the file 
name.
zWhen “Date / Time” is selected for the File 
Name, the file name will automatically 
default to the date/time format.
Enter a file name by using the on-screen 
Keyboard, and then select “OK”.
zUp to 20 characters can be entered.
zWhen scanning to the SD Memory Card or 
USB Flash Memory, display limitation is up 
to 8 characters on the screen.
zFor instructions on how to enter characters, 
refer to Using the Keyboard in the 
Operating Instructions (For Function 
Parameters) of provided CD-ROM.
zWhen storing data with the same file name 
as the one in a memory card, a number is 
added to the file name automatically in the 
order that a file is stored (Ex: name_02.jpg). 
						

							60
 Chapter 3    Scanner Settings
Scanning Special Originals
Scanning 2-Sided Originals
2-sided originals can be scanned, and the binding position can be selected. 
zScanning mixed size originals in the 2-Sided mode is only available with the following combinations of original 
sizes.
zThe standard setting of “2-Sided Original” can be changed. Refer to Scanner Settings in the Operating 
Instructions (For Function Parameters) of provided CD-ROM.
1Place original(s) on the ADF.
zFor details on how to place originals, refer to 
Placing Originals (see page 6) and Basic 
Operation Procedure (see page 8).
2Press the Scan/Email key.
3Select “Basic Menu”.
4Select “2-Sided Original”.
5Select a bind position, and then select 
“OK”.
CombinationOriginal Size 1Original Size 2
Combination 1
5.5 x 8.5 (Invoice) 8.5 x 11-R (Letter-R)
Combination 28.5 x 11-R (Letter-R) 8.5 x 14 (Legal)
Combination 38.5 x 11 (Letter) 11 x 17 (Ledger)