Home
>
Panasonic
>
Digital Camera
>
Panasonic Digital Camera Dmc Ts20 Owners Manual For Advanced Features
Panasonic Digital Camera Dmc Ts20 Owners Manual For Advanced Features
Have a look at the manual Panasonic Digital Camera Dmc Ts20 Owners Manual For Advanced Features online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 143
- 143 -
Others
•If the camera is moved too slowly, the camera has assumed that camera motion was stopped
and will end the still picture recording.
•If there is a great deal of shaking towards the recording direction while moving the camera,
recording will end.> When recording in [Panorama Shot], try to trace a small half-circle parallel to the recording
direction, taking about 4 seconds to complete the half-circle (approximate).
•Is your finger covering up the speaker? (P13)
•It is possible that the...](http://img.usermanuals.tech/thumb/58/66178/w64_dmc-ts20_en_adv_om_d-142.png "Page 143
- 143 -
Others
•If the camera is moved too slowly, the camera has assumed that camera motion was stopped
and will end the still picture recording.
•If there is a great deal of shaking towards the recording direction while moving the camera,
recording will end.> When recording in [Panorama Shot], try to trace a small half-circle parallel to the recording
direction, taking about 4 seconds to complete the half-circle (approximate).
•Is your finger covering up the speaker? (P13)
•It is possible that the...")
![Page 145
- 145 -
Others
•Is the flash setting set to [Œ]?
> Change the flash setting. (P57)
•The flash cannot be used in the following cases:–When using Auto Bracket (P64)–In Miniature Effect Mode (P67)–[Scenery]/[Panorama Shot]/[Night Scenery]/[Sunse t]/[Glass Through] in Scene Mode (P68)–When recording in [Burst] (except for [ ]) (P89)
•The flash is activated twice when Red-Eye Reduction (P58) has been set.•Has [Burst] (P89) in the [Rec] menu been set to [ ]?
•[Rotate Disp.] (P51) is set to [ ] or [ ]....](http://img.usermanuals.tech/thumb/58/66178/w64_dmc-ts20_en_adv_om_d-144.png "Page 145
- 145 -
Others
•Is the flash setting set to [Œ]?
> Change the flash setting. (P57)
•The flash cannot be used in the following cases:–When using Auto Bracket (P64)–In Miniature Effect Mode (P67)–[Scenery]/[Panorama Shot]/[Night Scenery]/[Sunse t]/[Glass Through] in Scene Mode (P68)–When recording in [Burst] (except for [ ]) (P89)
•The flash is activated twice when Red-Eye Reduction (P58) has been set.•Has [Burst] (P89) in the [Rec] menu been set to [ ]?
•[Rotate Disp.] (P51) is set to [ ] or [ ]....")
![Page 148
Others
- 148 -
•Is the camera connected to the PC correctly?•Is the camera recognized by the PC correctly?> Select [PC] when connecting. (P120)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection
cable to another USB terminal.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format...](http://img.usermanuals.tech/thumb/58/66178/w64_dmc-ts20_en_adv_om_d-147.png "Page 148
Others
- 148 -
•Is the camera connected to the PC correctly?•Is the camera recognized by the PC correctly?> Select [PC] when connecting. (P120)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the
camera.
> If there are two or more USB terminal on a single PC, try connecting the USB connection
cable to another USB terminal.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format...")
![Page 149
- 149 -
Others
•Press [MENU/SET] after viewing the last screen (12/12). For details, refer to P7.
> Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then
select the [ ~] icon to set the desired language. (P52)
•AF Assist Lamp will turn on white in the dark place to assist the focusing.
•Is [AF Assist Lamp] on the [Rec] menu set to [ON]? (P91)•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect...](http://img.usermanuals.tech/thumb/58/66178/w64_dmc-ts20_en_adv_om_d-148.png "Page 149
- 149 -
Others
•Press [MENU/SET] after viewing the last screen (12/12). For details, refer to P7.
> Press [MENU/SET], select the [Setup] menu icon [ ]. Then press [MENU/SET], and then
select the [ ~] icon to set the desired language. (P52)
•AF Assist Lamp will turn on white in the dark place to assist the focusing.
•Is [AF Assist Lamp] on the [Rec] menu set to [ON]? (P91)•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect...")
![Page 150
Others
- 150 -
•If the camera is used in cold places such as ski resorts or places at high altitude with the snow
or water droplets adhered to the camera, some parts of the camera may become hard to move
with snow or water droplets freezing in the gap of the zoom button or the camera [ON/OFF]
button. This is not a malfunction. When the camera returns to normal temperature it will
function as normal.
•When using the camera in a place with sand or dust, some parts of the camera may become
hard to move...](http://img.usermanuals.tech/thumb/58/66178/w64_dmc-ts20_en_adv_om_d-149.png "Page 150
Others
- 150 -
•If the camera is used in cold places such as ski resorts or places at high altitude with the snow
or water droplets adhered to the camera, some parts of the camera may become hard to move
with snow or water droplets freezing in the gap of the zoom button or the camera [ON/OFF]
button. This is not a malfunction. When the camera returns to normal temperature it will
function as normal.
•When using the camera in a place with sand or dust, some parts of the camera may become
hard to move...")
- 151 - Others •When using the Extended Optical Zoom, the zooming action will stop temporarily. This is not a malfunction. •Is the camera set to Macro Zoom Mode? (P61) Maximum zoom during Macro Zoom Mode is 3 k digital zoom. •When you perform an operation after taking a certain action, the pictures may be recorded in folders with different numbers from th e ones used prior to the operation. •If the battery was inserted or removed without first turning the camera’s power off, the folder and file numbers for the pictures taken will not be stored in the memory. When the power is then turned back on and pictures are taken, they may be stored under file numbers which should have been assigned to previous pictures. •This is the [Auto Demo] which introduces the features of the camera. Press a button to return the camera to the original screen. Zooming stops instantaneously. Zoom does not go up to maximum magnification. The file numbers are not recorded consecutively. The file numbers are recorded with previously used numbers. When the camera is left alone, the Slide Show is suddenly displayed.
• SDXC Logo is a trademark of SD-3C, LLC. • QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license therefrom. • Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. • Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • YouTube is a trademark of Google Inc. • This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered trademark of DynaComware Taiwan Inc. • Other names of systems and products mentioned in these instructions are usually the registered trademarks or trademarks of the m anufacturers who developed the system or product concerned. This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http://www.mpegla.com .