Panasonic Digital Camera Dmc Ts20 Owners Manual For Advanced Features

							- 111 -
Playback/Editing
You can set protection for pictures you do not want to be deleted by mistake.
Select [Protect] on the [Playback] menu.  (P42)
Press  3/4 to select [SINGLE] or [MULTI] and then press [MENU/
SET].
∫ Canceling all the [Protect] settings1Select [Protect] on the [Playback] menu.
2Press  3/4  to select [CANCEL] and then press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
Note
•The protect setting may not be effective on other equipment.•Even if you protect pictures in the built-in memo ry or a card, they will be deleted if the built-in 
memory or the card is formatted.
•Even if you do not protect pictures on a card, they cannot be deleted when the card’s 
Write-Protect switch is set to [LOCK].
[Protect]
Select the picture, and then press 
[MENU/SET].
•The settings are canceled when 
[MENU/SET] is pressed again.
•Exit the menu after it is set.
[SINGLE] [MULTI]
Press  2/1  to 
select the picture. Press 
3/4/2/1 to 
select the pictures. 
						

							Playback/Editing
- 112 -
You can delete or change the information relating to Face Recognition for the selected 
picture.
Select [Face Rec Edit] on the [Playback] menu. (P42)
Note
•Cleared information regarding the [Face Recog.] cannot be restored.•When all Face Recognition information in a picture has been canceled, the picture will not be 
categorized using Face Recognition in [Category Selection] in [Filtering Play].
•You cannot edit the Face Recognition information of protected pictures.
[Face Rec Edit]
Press  3/4 to select [REPLACE] or [DELETE] and then press [MENU/
SET].
Press  2/1 to select the picture and then press [MENU/SET].
Press  2/1 to select the person and then press 
[MENU/SET].
(When [REPLACE] is selected) Press  3/4/2/ 1 to 
select the person to replace and then press [MENU/
SET].
•Confirmation screen is displayed. It is executed when [Yes] is 
selected. 
Exit the menu after it is executed. 
						

							- 113 -
Playback/Editing
You can copy the data of the pictures you have taken from the built-in memory to a card or 
from a card to the built-in memory.
Select [Copy] on the [Playback] menu. (P42)
Press  3/4 to select the copy destination and then press 
[MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is selected. 
Exit the menu after it is executed.
•Do not turn the camera off at any point during the copying process.
Note
•If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, a new folder is created and the picture is copied. 
If a picture exists with the same name (folder numbe r/file number) as the picture to be copied in 
the copy destination when [ ] is selected, that picture is not copied.
•It may take time to copy the picture data.•[Print Set], [Protect] or [Favorite] settings will not be copied. Perform the settings again after 
copying is finished.
[Copy]
[] ([IN>SD]) :All the picture data in the built-in memory are copied onto the 
card at one time.
[] ([SD>IN]) :One picture at a time is copied from the card to the built-in 
memory.
Press  2/1 to select the picture and then press [MENU/SET]. 
						

							Connecting to other equipment
- 114 -
Connecting to other equipmentPlaying Back Pictures on a TV Screen
Pictures recorded with this unit can be played back on a TV screen.
Preparations:
Set the [TV Aspect].  (P51)
Turn this unit and the TV off.
Connect the camera and a TV.
•Check the directions of the connectors, and plug them straight in or unplug them 
straight out. (Otherwise the connectors may bend out of shape, which will cause a 
malfunction.)
•Do not use any other AV cables except the supplied one.
A Yellow: to the video input socket
B White: to the audio input socket
C AV cable (supplied)
D Align the marks, and insert.
Turn the TV on and select external input.
Turn the camera on and then press [ (]. 
						

							- 115 -
Connecting to other equipment
Note
•Depending on the [Picture Size], black bands ma y be displayed on the top and bottom or the 
left and right of the pictures.
•Change the screen mode on your TV if the picture is displayed with the top or bottom cut off.•When you play back a picture vertically, it may be blurry.•When pictures are displayed, they may not be displayed properly depending on the type of TV.•No sound is output from the camera speakers.•Read the operating instructions for the TV.•Before removing a battery, turn the camera off and disconnect the AV cable.
The recorded still pictures can be played back on a TV with an SD Memory Card slot.
•Depending on the TV model, pictures may not be displayed on the full screen.•Motion pictures cannot be played back. To play back motion pictures, connect the camera to 
the TV with the AV cable (supplied).
•In some cases, panorama pictures cannot be played back. Also, auto-scroll playback of 
panorama pictures may not work.
•For cards compatible with playback, refer to the operating instructions of the TV. 
						

							Connecting to other equipment
- 116 -
Saving the Recorded Still Pictures and Motion 
Pictures
Methods to export still pictures and motion pictures to other devices will vary depending on 
the file format (JPEG or MP4). Here are a few suggestions.
•
See the operating instructions for the recorder about the details about copying and playing 
back.
Copy by inserting the SD card into the recorder
Panasonic devices compatible with the respective file 
format (such as a Blu-ray Disc recorder) can be used to 
copy the images.
For details on compatible devices, refer to the support sites 
below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
¢ Some compatible devices may not be sold in certain countries and regions. 
						

							- 117 -
Connecting to other equipment
Copy images played back with this unit to Blu-ray disc, DVD disc, hard disk, or video using 
a Blu-ray Disc Recorder, DVD recorder, or video.
1Connect this unit with the recording equipment with an AV cable (supplied).2Start the playback of this unit.3Start the recording on the recording equipment.
•When ending the recording (copying), stop the playback on this unit after stopping the 
recording of the recording equipment.
Note
•When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV Aspect]  (P51) on 
this unit to [4:3] before starting a copy. The im age will be vertically long if you play back motion 
pictures copied with [16:9] setting on a [4:3] aspect TV.
•See the operating instructions for the recording equipment regarding the details of copying and 
playing back.
Copy the playback image using an AV cable
1 Yellow: to the video input socket
2 White: to the audio input socket
A AV cable (supplied)0â0÷0Á0ð0ö0õ0Á0Ð0Á0å0ê0è0ê0õ0â0í 
						

							Connecting to other equipment
- 118 -
1Install “ PHOTOfunSTUDIO ” to the PC.
•Read the separate “Basic Owners Manual” for more information about the software in the 
CD-ROM (supplied) and how to install it.
2Connect camera to PC.
•For details on how to connect the camera, refer to “Loading still pictures or motion 
pictures”  (P120) .
3Copy the images to a PC using “ PHOTOfunSTUDIO ”.
•For details, refer to the operating instructions of “ PHOTOfunSTUDIO ” (PDF).
Note
•Do not delete or move imported files or fol ders in Windows Explorer. When viewing in 
“ PHOTOfunSTUDIO ”, you will not be able to play back or edit.
Copying to a PC using “ PHOTOfunSTUDIO ”
The software “ PHOTOfunSTUDIO ” on the CD-ROM 
(supplied) can be used to save all the still pictures and motion 
pictures recorded by the camera in their various formats to 
your computer. 
						

							- 119 -
Connecting to other equipment
Connecting to a PC
You can transfer the pictures in the camera to a PC by connecting the camera and the PC.
•Some PCs can read directly from the card removed from the camera. For details, refer to the 
operating instructions of your PC.
•If the computer being used does not support SDXC Memory Cards, a message 
prompting you to format may appear. (Doing so will cause recorded images to be erased 
so do not choose to format.)
If the card is not recognized, please refer to the below support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
•You can easily print out or mail the pictures you have imported. Use of the 
“ PHOTOfunSTUDIO ” bundled software on the CD-ROM (supplied) is a convenient way of 
doing this.
•Read the separate “Basic Owners Manual” for more information about the software in the 
CD-ROM (supplied) and how to install it.
∫PC that can be used
The unit can be connected to any PC cap able of recognizing a mass storage device.
•
Windows support: Window s 7/Windows Vista/Windows XP/Windows 2000/
Windows Me
•Mac support: OS X v10.1 ~ v10.7 
						

							Connecting to other equipment
- 120 -
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the computer and camera with the USB connection cable 
(supplied).
Press 3/4 to select [PC], and then press [MENU/SET].
Operate the PC.
•You can save the images into the PC by dragging and dropping the image, or the folder 
with the image that you would like to transfer onto a different folder in the PC.
Note
•Use a battery with sufficient battery power. If the remaining battery power becomes low while 
the camera and the PC are communicating, the alarm beeps.
Refer to 
“Disconnecting the USB connection cable safely”  (P121)  before disconnecting the 
USB connection cable. Otherwise, data may be destroyed.
•Before inserting or removing a card/battery, turn the camera off and disconnect the USB 
connection cable. Otherwise, data may be destroyed.
Loading still pictures or motion pictures
•Check the directions of the connectors, and plug them straight in or unplug them 
straight out. (Otherwise the connectors may bend out of shape, which will cause a 
malfunction.)
•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
A USB connection cable (supplied)
B Align the marks, and insert.
0â0÷0Á0ð0ö0õ0Á0Ð0Á0å0ê0è0ê0õ0â0í