Panasonic Digital Camera Dmc Gx85 Owners Manual For Advanced Features

261
10. Using the Wi-Fi function
1Connect to a smartphone. (P255)
2Operate the smartphone.
You can send location information acquired with a smartphone to the camera. After 
sending the information, you can also write it on images stored  in the camera.
•
Once the location information is sent to the camera, you can al so write it on images by 
performing [Location Logging] (P233)  in the [Playback] menu.
•Location information different from that at the time of recordi ng may be written. Keep the...

10. Using the Wi-Fi function
262
∫Recording location information and images 1Start recording location information with the smartphone.
2Record images with the camera.3Stop recording the location information with the smartphone.
∫ Writing the location information to the images
(Preparation on the camera)
Connect to a smartphone.  (P255)
4Operate the smartphone.
•
Cautions for Use:
Be sure to pay special attention to the privacy, the likeness r ights, etc. of the subject 
when you use this function. Use at...

263
10. Using the Wi-Fi function
Using a smartphone, you can combine motion pictures recorded with the camera’s [Snap 
Movie] function  (P176). Music can be added to motion pictures to be combined. In 
addition, you can save 
the combined motion picture or upload it on a web service.
A Record motion pictures with [Snap Movie].
B Send the recorded motion pictures.
C Edit the motion pictures.
D Combine the motion pictures, save the combined motion picture,  and send it to a web 
service.
E Combine the...

10. Using the Wi-Fi function
264
Displaying pictures on a TV
1Select the menu. (P54)
2Select [Via Network] or [Direct], and connect.  (P282)
3Select a device you want to connect.
•When the connection is established, the screen is displayed.
4Take or play back pictures on this unit.
•To terminate the connection, follow the steps below:
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [Yes]
(You can also terminate the connection by pressing [Wi-Fi].  (P253))
•If you display pictures using the Wi-Fi function,...

265
10. Using the Wi-Fi function
Sending images
When sending images, select the method for sending them after selecting [New 
Connection].
After the connection has been completed, settings for sending,  such as the image size for 
sending, can also be changed.
∫ Images that can be sent
¢1 Sending by [Send Images While Recording] is not available.
¢ 2 A motion picture recorded in [AVCHD] can be sent to [PC] if th e file size is 4 GB or smaller. It 
cannot be sent if the size is greater than 4 GB.
¢ 3...

10. Using the Wi-Fi function
266
A picture can be automatically sent to a specified device every time you take it.
•When connected with [Send Images While Recording], [ ] is 
displayed on the recording screen, and [ ] is displayed while 
sending a file.
•To terminate the connection, follow the steps below:
>   [Setup]  > [Wi-Fi] > [Wi-Fi Function]  > [Yes]
•You can terminate the connection or change the send settings 
by pressing [Wi-Fi].  (P253)
You cannot change the settings while sending pictures....

267
10. Using the Wi-Fi function
Images can be selected and sent after recording.
∫How to select an image(s) after selecting [Single Select] or [M ulti Select] 
•
Details of the playback menu [Favorite] or [Print Set] settings  will not be sent.
Not available in these cases:
•
Some images taken with a different camera may not be able to be  sent.•Images that have been modified or edited with a computer may no t be able to be sent.
Send Images Stored in the Camera
[Single Select] setting
1Select the...

10. Using the Wi-Fi function
268
Pressing [DISP.] after completing a connection allows you to change the settings for 
sending such as the image size for sending.
¢ 1 Only available when the destination is set to [Web service].
¢ 2 Only available when the destination is set to [PC].
¢ 3 Only available when the destination is set to [Cloud Sync. Ser vice] or [Web service].
¢ 4 Only available when the destination is set to [Cloud Sync. Ser vice].
Changing the settings for sending images
[Size]Resize the...

269
10. Using the Wi-Fi function
Sending images to a smartphone/tablet
1Select the menu. (P54)
2Select [Via Network] or [Direct], and connect.  (P282)
3Select a device you want to connect.4Check the send settings, and select [Set].
•To change the send setting, press [DISP.]. (P268)
Preparations
•
Install the “ Image App ” in advance. (P254)
> [Setup]  > [Wi-Fi]  > [Wi-Fi Function]  > [New Connection]  > 
[Send Images While Recording] or [Send Images Stored in the Cam era] > 
[Smartphone]
On your...

10. Using the Wi-Fi function
270
Printing Wirelessly
1Select the menu. (P54)
2Select [Via Network] or [Direct], and connect.  (P282)3Select a printer you want to connect.
4Select pictures, and then print.
•The procedure for selecting pictures is the same as the one for  when the USB connection 
cable is connected.  (P302)
•To terminate the connection, press [ ].
(You can also terminate the connection by pressing [Wi-Fi].  (P253))
Not available in these cases:
•
Motion pictures, 4K burst files, and...