Panasonic Digital Camera Dmc Gx85 Owners Manual For Advanced Features

301
11. Connecting to other equipment
Printing the Pictures
If you connect the camera to a printer supporting PictBridge, you can select the pictures to 
be printed out and instruct that printing be started on the camera’s monitor.
•
Group pictures will not be displayed as group pictures but as s ingle pictures.•Some printers can print directly from the card removed from the  camera. For details, refer to 
the operating instructions of your printer.
Preparations:
Turn on the camera and the printer....

11. Connecting to other equipment
302
•Disconnect the USB connection cable after printing.•Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery 
power becomes low while the camera and the printer are connecte d, the status indicator blinks 
and the alarm beeps. If this happens during printing, stop prin ting at once. If not printing, 
disconnect the USB connection cable.
•Do not disconnect the USB connection cable while [ å] (Cable disconnect prohibit icon)...

303
11. Connecting to other equipment
∫Print Settings
Select and set the items both on the screen in step 2 of the “Selecting a single picture and 
printing it” and in step 
3 of the “Selecting multiple pictures and printing them” procedu res.
•
When you want to print pictures on a paper size or a layout whi ch is not supported by the 
camera, set [Paper Size] or [Page Layout] to [ {] and then set the paper size or the layout on 
the printer.
(For details, refer to the operating instructions of the...

11. Connecting to other equipment
304
Enjoying 3D pictures
Attaching the 3D interchangeable lens (H-FT012: optional) to the camera allows you to 
take 3D pictures for extra impact.
1Attach the 3D interchangeable lens to the camera.
2Bring the subject into the frame and record by pressing the shu tter 
button fully.
•Focusing is not required when recording 3D pictures.
•Still pictures recorded with the 3D interchangeable lens attach ed are saved in MPO 
format (3D).
•It is recommended to use a tripod or a...

305
11. Connecting to other equipment
Connecting the camera to a 3D compatible television and playing back pictures taken in 
3D allows you to enjoy 3D pictures for extra impact.
Connect the unit to a 3D compatible television using the HDMI m icro cable 
and display the playback screen.  (P292)
•When [VIERA Link] is set to [ON] and the camera is connected to  a TV supporting VIERA Link, 
input of the TV will be switched a utomatically and playback screen will be displayed. (P294)
•For the pictures...

11. Connecting to other equipment
306
∫Functions that cannot be used during 3D recording
When recording with the 3D interchangeable lens (H-FT012: optio nal), the following 
feature will be disabled:
(Recording functions)
•
[Glistening Water]/[Glittering Illuminations]/[Handheld Night S hot] (Scene Guide Mode)•[Rough Monochrome]/[Impressive Art]/[High Dynamic]/[Toy Effect] /[Toy Pop]/[Star Filter]/[One 
Point Color]/[Sunshine] (Creative Control Mode)
•Defocus control function
¢ 1 The motion picture...

307
12. Others
Optional accessories
•Some optional accessories may not be available in some countrie s.
After attaching the flash (DMW-FL200L, DMW-FL360L, DMW-FL580L: 
optional), the effective range will be increased when compared to the 
camera’s built in flash.
Preparations:
•
Turn off the camera and close the built-in flash.
•To change the settings for external flashes on the camera, refe r to P158 .•Refer to  P163 about the settings for the wireless flash.
External Flash (optional)
Removing the Hot...

12. Others
308
•When an external flash is attached, the following functions are available in addition to the 
functions available with the built-in flash.
–Burst recording (when a setting other than [SH] is selected for  [Burst Rate])–Aperture Bracket
–Focus Bracket•You can set the aperture value, the shutter speed and the ISO s ensitivity on the camera even 
when attaching the external flash.
•If you record at close range with a wide angle, light from the  flash may be blocked by the lens, 
darkening...

309
12. Others
Monitor Display/Viewfinder Display
•The following images are examples of when the display screen is set to [ ] (monitor 
style) in the monitor.
In recording
BKT
BKT
BKT
BKT
BKT
BKT98
98
98200
0020020060
60
60
3.5
3.5
3.5
AFS
AFS
AFSBKT
BKT
BKTL4:3
0
0AEL
AEL
AELBKT
BKT
BKTAWB
AWB
AWB
60 p0é0å0ó
0é0å0ó
I
ISO
SS
S
SS
F
FMINI
MINI
MINI
MINI
Fn5
Fn5
Fn5
Fn5
Fn6
Fn6
Fn6
Fn6
Fn7
Fn7
Fn7
Fn7
Fn8
Fn8
Fn8
Fn8
Fn9
Fn9
Fn9
Fn9SNAP
SNAPSNAP
··





1
Recording Mode  (P43)
Custom settings...

12. Others
310
2
A›Quality (P193)
Focus Mode  (P95, 106)
Focus Bracket (P140)
Post Focus  (P131)
š  
ØAF Mode  (P97)
Pull Focus  (P178)
Face Recognition  (P204)
AF Lock (P109)
Burst (P135)
4K Photo  (P118)
Self-timer  (P137)
 Battery indication  (P22)
Image Stabilizer (P146)
Jitter alert (P147)
Recording state (Flashes red.)/
Focus (Lights green.)  (P42)
Focus (Under low illumination) 
(P93)
Focus (Starlight AF) (P93)
Connected to Wi-Fi
Histogram (P215)
3
Name¢2 (P206)
Number of days that have passed...