Panasonic Digital Camera Dmc Gx85 Owners Manual For Advanced Features

281
10. Using the Wi-Fi function
Delete the login ID from the camera when transferring it to another party or disposing of it. 
You can also delete your “LUMIX CLUB” account.
1Select the menu.  (P54)
•
The message is displayed. Select [Next].
2Select [Yes] in the login ID delete confirmation screen.
•The message is displayed. Select [Next].
3Select [Yes] on the confirmation screen for deleting the “LUMIX  CLUB” 
account.
•
If you want to continue using the service, selecting [No] will  only delete the...

10. Using the Wi-Fi function
282
About Connections
If you have selected [New Connection], select a Wi-Fi function and destination first, and 
then select a connection method.
If you have selected [Select a destination from History] or [Select a destination from 
Favorite], you can connect with the same Wi-Fi connection setti ngs as used previously.
This section describes connection methods.
•
When connecting with the same settings as used previously, refe r to P286 .
When a screen similar to the one...

283
10. Using the Wi-Fi function
You can select the method for connecting to a wireless 
access point.
¢WPS refers to a function that allows you to easily configure 
the settings related to the connection and security of wireless  
LAN devices.
To check if the wireless access point you are using is 
compatible with WPS, refer to the manual of the wireless 
access point.
Connecting via a wireless access point (via the network)
[WPS (Push-Button)] Save push button type wireless access point that is...

10. Using the Wi-Fi function
284
Search for available wireless access points.
•Confirm encryption key of the selected wireless access point if the network authentication is 
encrypted.
•When connecting by [Manual Input], confirm SSID, encryption type, encryption key of the 
wireless access point you are using.
1Select the wireless access point you are connecting 
to.
•
Pressing [DISP. ]  will search for a wireless access point 
again.
•If no wireless access point is found, refer to “When 
connecting with...

285
10. Using the Wi-Fi function
•Check the wireless access points instruction manual and settings when saving a wireless 
access point.
•If no connection can be established, the wireless access point’ s radio waves may be too weak.
Refer to “Message Display”  (P316)  and “Troubleshooting” (P318)  for details.
•Depending on your environment, transmission speed between the camera and wireless access 
point may decrease. In addition, the wireless access point may not be available for use.
You can select...

10. Using the Wi-Fi function
286
When the Wi-Fi function is used, a record is saved in the history. You can register records 
as favorites. Using the history  or favorites list, you can easily connect with the same 
settings as used previously.
Check to see if the Wi-Fi settings of the device to connect to  are the same as used 
previously.
•
If the settings of the device to connect to have been changed,  it may not be possible to connect 
to the device.
1Select the menu.  (P54)
2Select [Select a...

287
10. Using the Wi-Fi function
1Select the menu. (P54)
2Select the favorite history you want to edit, and then press  1.
•
Performing [Reset Wi-Fi Settings] clears the history and the co ntents saved in [Select a 
destination from Favorite].
•When connecting to a network to which many PCs are connected by  using [Select a destination 
from History] or [Select a destination from Favorite], a connec tion attempt may fail because the 
previously-conn ected device will be identified from among many...

10. Using the Wi-Fi function
288
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu. (P54)
•
When [ON] is selected, you can also set up a connection by scan ning a QR code. (P256)
•For information on how to enter characters, refer to  P61.
•If you are using the PC with standard settings, you do not need  to change the workgroup.
> [Setup]  > [Wi-Fi]  > [Wi-Fi Setup]  > Desired item to be set
[Wi-Fi Password]...

289
10. Using the Wi-Fi function
•For information on how to enter characters, refer to P61.
•Make a copy of password.
If you forget the password, you can reset it with [Reset Wi-Fi  Settings] in the [Setup] menu, 
however other settings will also be reset. (excluding [LUMIX CL UB] )
•A “MAC Address” is a unique address that is used to identify ne twork equipment.•“IP address” refers to a number that identifies a PC connected to a network such as the 
Internet. Usually, the addresses for homes are...

290
11.  Connecting to other equipment
Watching 4K motion pictures on a TV/ Saving 
4K motion pictures on your PC or recorder
∫ Playing Back on a TV Screen
By connecting the camera to a TV that supports motion pictures  in 
4K and playing back motion pictures recorded with their size se t to 
[4K] in [Rec Quality], you can enjoy finely-detailed motion pic tures 
in 4K. Even though the output resolution will be lower, you can  also 
play them back by connecting the camera to a TV that does not s upport...