Panasonic Digital Camera Dmc Gf5 Owners Manual

							- 211 -
Others
•Is it connected properly with the HDMI mini cable (optional)?  (P177)
> Confirm that the HDMI mini cable (optional) is firmly fitted.
> Press [ (] on this unit.
•Is the [VIERA Link] on this unit set to [ON]?  (P72)
> Depending on HDMI terminal of the TV, the i nput channel may not switch automatically. In 
this case, use the remote control for the TV to switch input. (For details on how to switch 
input, please read the operating instructions for the TV.)
> Check the VIERA Link setting on the connected device.
> Turn the power to the unit off and then back on again.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On]. (Refer to the operating 
instructions of the TV for details.)
•Is the camera connected to the PC correctly?•Is the camera recognized by the PC correctly?
> Set to [PC] in [USB Mode].  (P71, 182)
> Disconnect the USB connection cable. Connect it again while the card is inserted in the 
camera.
> Check if your PC is compat ible with SDXC memory cards.
http://panasonic.net/avc/sdcard/information/SDXC.html
> A message prompting to format the card may be displayed when connecting, but do not 
format.
> If the [Access] displayed on the LCD monitor does not disappear, disconnect the USB 
connection cable after turning off the power.
•Pictures cannot be printed using a printer that does not support PictBridge.
> Set to [PictBridge(PTP)] in [USB Mode].  (P71, 186)
> When using a printer with a Cropping or borderless printing function, cancel this function 
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can 
be printed.
VIERA Link does not work.
The picture cannot be transferred when the camera is connected to a PC.
The card is not recognized by the PC.
The card is not recognized by the PC. (SDXC memory card is used)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing. 
						

							Others
- 212 -
•This is the noise of the Dust Reduction Function working (P195); it is not a malfunction.
•It is a sound of lens movement or aperture operation when the power is turned [ON] or [OFF], 
and it is not a malfunction.
•You may hear a sound from the lens and image in the LCD monitor may suddenly change when 
the brightness has changed by zoom operation or moving the camera, but there is no effect on 
recording.
The sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
> Press [MENU/SET], select the [Setup] menu icon [ ] and then select the [ ~] icon to set 
the desired language.  (P73)
•This is a highlight function showing the white saturated area.  (P155)•Is the [Highlight] set to [ON]?
•In dark places, the AF Assist Lamp (P156) lights red to make it easier to focus on a subject.
•Is [AF Assist Lamp] on the [Custom] menu set to [ON]?  (P156)•The AF Assist Lamp does not turn on in bright places.
•The surface of the camera may become warm during use. This does not affect the performance 
or quality of the camera.
•If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock.  (P27)
•When you perform an operation after taking a certain action, the pictures may be recorded in 
folders with different numbers from the ones used prior to the operation.
•If the battery was inserted or removed without first turning the camera’s power off, the folder 
and file numbers for the pictures taken will not be stored in the memory. When the power is 
then turned back on and pictures are taken, they may be stored under file numbers which 
should have been assigned to previous pictures.
Others
The camera makes a noise when turned [ON].
There is a sound from lens unit.
An unreadable language was selected by mistake.
Part of the picture is flashing in black and white.
A red lamp sometimes turns on when the shutter button is pressed halfway.
The AF Assist Lamp does not turn on.
The camera becomes warm.
The clock is reset.
The file numbers are not recorded consecutively.
The file numbers are recorded with previously used numbers. 
						

							•G MICRO SYSTEM is a lens exchange type digital camera 
system of LUMIX based on a Micro Four Thirds System 
standard.
Micro Four Thirds™ and Micro Four Thirds Logo marks are 
trademarks or registered trademarks of Olympus Imaging 
Corporation, in Japan, the United States, the European 
Union and other countries.
Four Thirds™ and Four Thirds Logo marks are trademarks 
or registered trademarks of Olympus Imaging Corporation, 
in Japan, the United States, the European Union and other 
countries.
SDXC Logo is a trademark of SD-3C, LLC.“AVCHD” and the “AVCHD” logo are trademarks of 
Panasonic Corporation and Sony Corporation.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby 
Laboratories.
HDMI, the HDMI Logo, and High-Definition Multimedia 
Interface are trademarks or registered trademarks of HDMI 
Licensing LLC in the United States and other countries.
HDAVI Control™ is a trademark of Panasonic Corporation.QuickTime and the QuickTime logo are tradem arks or registered trademarks of Apple Inc., 
used under license therefrom.
Adobe is a trademark or registered trademark of Adobe Systems Incorporated in the United 
States and/or other countries.
iMovie, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other 
countries.
Windows and Windows Vista are either register ed trademarks or trademarks of Microsoft 
Corporation in the United States and/or other countries.
This product uses “DynaFont” from DynaComware Corporation. DynaFont is a registered 
trademark of DynaComware Taiwan Inc.
Other names of systems and products mentioned in these instructions are usually the 
registered trademarks or trademarks of t he manufacturers who developed the system or 
product concerned.
This product is licensed under the AVC patent portfolio license for the personal and 
non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard 
(“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a 
personal and non-commercial activity and/or was obtained from a video provider licensed to 
provide AVC Video. No license is granted or shall be implied for any other use. Additional 
information may be obtained from MPEG LA, LLC. See http://www.mpegla.com
 .