Panasonic DBS 824 Information Manual

Account Codes System Features
1-4 DBS 824-3.0/3.2-700 Revised April 2000
6.  Dial the telephone number.
To enter an Account Code during an outside call:
1. Press the AUTO
 key.
2. Press “#.”
“Enter Account #” appears on the display.
3.  Enter the Account Code (up to 10 digits).
The Account Code entered appears on the display.
4. Press “#.”
Hardware Requirements
 An SMDR printer or external call accounting system is required to collect 
account code records.
Related Programming
 FF3 (Extension): Forced...

System Features Account Codes
Revised April 2000 DBS 824-3.0/3.2-700   1-5
enter a valid Verified Account Code to upgrade the TRS type assigned to the 
extension.
Operation
1.  Pick up the handset.
The phone issues intercom dial tone.
2. Dial “#11.”
3.  Enter the four-digit Account Code.
4. Press “#.”
The phone issues intercom dial tone.
5.  Press an available CO key or dial a trunk access code.
The phone issues outside dial tone. 
6.  Dial the telephone number.
The Verified Account Code TRS type remains...

Answer Supervision for Voice Mail System Features
1-6 DBS 824-3.0/3.2-700 Revised April 2000
 “0000” cannot be used for a verified account code.
 Verified account codes do not override station lockout.
 Verified account codes do not override Least Cost Routing (LCR) settings.
Answer Supervision for Voice Mail
(CPC-S and CPC-M)
Description
This feature allows the DBS 824 to send an answer signal to third-party voice 
mail systems. Sending an answer signal provides quicker response time 
between the DBS...

System Features Auto Day Mode
Revised April 2000 DBS 824-3.0/3.2-700   1-7
 The digits used for the answer signal code are determined by the 
requirements of the voice mail system.
 If the called extension does not answer and is forwarded to voice mail, the 
DBS 824 sends a call forward ID code back to the voice mail system.
 During transmission of the answer signal code, other DTMF digits and 
functions from the DBS 824 extension are ignored.
Auto Day Mode
(CPC-S and CPC-M)
Description
Auto Day Mode...

Auto Set Relocation System Features
1-8 DBS 824-3.0/3.2-700 Revised April 2000
 When one auto mode is turned on, the mode cannot be reset by the DAY/
NIGHT1/NIGHT2
, NIGHT
 key or NIGHT2
 key until 3 minutes after the 
auto mode is activated. (When both auto modes are set, the mode keys 
cannot be used.)
 If mode keys are not assigned, the access codes #520 (DAY/NIGHT1/
NIGHT2 toggle), #521 (Day), #522 (Night1) and #523 (Night2) can be 
used instead.
Auto Set Relocation
(CPC-S and CPC-M)
Description...

System Features Auto Set Relocation
Revised April 2000 DBS 824-3.0/3.2-700   1-9
 Extension 300 is placed out of service.
To Reactivate Extension 300:
1.  Unplug the extension cable from 300.
2.  Reconnect the cable.
Extension 300 assumes all extension features, TRS, and LCR settings that 
were initially assigned to 200.
Related Programming
 FF3 (Extension): Auto Set Relocation Code
Considerations
 The following types of data can be transferred using this feature:
- TRS type settings
- Ring settings...

Background Music System Features
1-10 DBS 824-3.0/3.2-700 Revised April 2000
Background Music
(CPC-S and CPC-M)
Description
If your system is set up to provide Background Music, music can be played 
from the speakers of idle telephones. If a call is made to an extension 
receiving Background Music, the music stops and the phone rings. 
Background Music is also interrupted when the phone goes offhook.
The system can also provide music-on-hold using the Background Music 
source or a separate music source....

System Features Battery Alarm
Revised April 2000 DBS 824-3.0/3.2-700   1-11
 The ON/OFF 
LED goes off.
 The date and time appear on the display.
Related Programming
 FF1 (System) Extension Class of Service Setting 
 FF3 (Extension) Extension Class of Service Assignment
Considerations
 The music source must be purchased separately. It is not provided with the 
DBS 824.
 If a single music source is used for both music-on-hold and background 
music, the music source connects to CN6 on the front of the...

Battery Backup System Features
1-12 DBS 824-3.0/3.2-700 Revised April 2000
Battery Backup
(CPC-S and CPC-M)
Description
The DBS 824 uses two 12-volt batteries. The backup batteries are connected 
in a series circuit, using cables provided with the DBS 824. With maximum 
traffic, the backup batteries last up to 40 minutes. The backup batteries should 
be replaced about every 3 years.
Call Forward ID Code for Voice Mail
(CPC-S and CPC-M)
Description
Call Forward ID Code for Voice Mail allows users to call...

System Features Caller ID
Revised April 2000 DBS 824-3.0/3.2-700   1-13
2. Press the AUTO
 key.
3. Press “*.”
4.  Enter the extension number.
5. Press the HOLD
 key.
Considerations
 External callers do not hear the tones sent to voice mail, but internal callers 
do.
 The Extension Copy program (FF9 2# 1-24#  1-24##) should not
 be used 
to copy extension settings that include a Call Forward ID Code.  Copying  
extension settings in this manner allows the copy “destination” to retrieve 
the messages of...