Panasonic Convertible Camera Aw E860 Operating Instructions
Here you can view all the pages of manual Panasonic Convertible Camera Aw E860 Operating Instructions. The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
-51- ;Other Set DisplayoGamma Level Setting [Gamma: 0.35 to 0.55] Gamma correction level can be set. pKnee Level Setting [Knee Point: 88% to 98%, Dynamic] 88% to 98%:The level of video signals subject to knee (knee point) can be set. Dynamic:Knee level is automatically adjusted according to the scene. qWhite Clip Level Setting [White Clip: 95% to 110%] The peak level of video signals to be white-clipped can be set. rFlare Correction Level Setting [Flare R/G/B: 0 to 100] Flare correction level can be...
Page 53
-53- $Setting to initial setIn case of the wrong setting in any use mode, take the following steps to return to the initial settings. (1) Select [Initialize Data] on the main menu screen of each Use Mode. (See page 29.) Press the YES/ABC switch, then [Initialize Data] screen shown for about 10 seconds. (2) Press the YES/ABC switch within about 10 seconds to return to the initial settings, the existing settings are initialized, the screen shown at 2, and the camera returns to main menu.(3) If the NO/BAR...
Page 54
-54- $Initial settings of the setting items (Factory preset values)UHalogen, Fluorescent, Outdoor Mode Picture Level ±0 ±0 ±0 Light PEAK/AVG 0 0 0 Light Area Top cut Top cut Top cut Brightness Auto ND (ELC) OFF OFF ON Set Auto Gain Up OFF OFF ON AGC Max Gain ––– ––– N/Eye H Manu Gain Up 0dB 0dB –––Pedestal ±0 ±0 –40 Chroma Level ±0 +0 +0 Color SetFlesh Tone ±0 ±0 ±0 White Bal AWC A AWC A ATWATW Speed ––– ––– Mid H Phase ±0 ±0 ±0 G/L, ColorSC Coarse 1 1 1 Bar SetSC Fine ±0 ±0 ±0 Color Bar Set 7.5 IRE 7.5...
Page 55
-55- UUser Mode Picture Level ±0 Light PEAK/AVG 0 Light Area Top cut Iris,Shutter, Auto Iris Adjust OFF Gain Set Shutter Mode Step Step/Synchro OFF Gain 0dBAGC Max Gain ––– Chroma Level +2 White Bal AWC A ATW Speed ––– Color SetPedestal ±0 Painting R Gain ±0 B Gain ±0 R Pedestal ±0 B Pedestal ±0 H Phase ±0 G/L, ColorSC Coarse 1 Bar SetSC Fine ±0 Color Bar Set 7.5 IRE Color Bar Set2 0.0 IREItem User mode Detail High H Detail Level H 20 V Detail Level H 19 H Detail Level L 13 Detail Set 1 V Detail Level L...
Page 56
-56- B_Mg Gain ±0 B_Mg Phase ±0 Mg Gain +27 Mg Phase ±0 Mg_R Gain ±0 Mg_R Phase ±0 R Gain +15 R Phase ±0 R_Yl Gain ±0 R_Yl Phase ±0 Yl Gain +18 Color Yl Phase +6 Matrix Set Yl_G Gain ±0 Yl_G Phase ±0 G Gain +30 G Phase +112 G_Cy Gain ±0 G_Cy Phase ±0 Cy Gain +44 Cy Phase –15 Cy_B Gain ±0 Cy_B Phase ±0 B Gain –20 B Phase +36 Item User mode Gamma 0.45 Knee Point 88% White Clip 110% Other Set 1Flare R 0 Flare G 0 Flare B 0 Black Stretch OFFClean DNR OFF Field/Frame Field Baud...
Page 57
-57- Appearance 3-5/16 (84)6-11/16 (170) 15/32 (12) 25/64 (10) 3-1/32 (77)23/32 (18) Unit: inch (mm)
Page 58
-58- SpecificationsSource voltage:DC 12V Power consumption:15.4 W 1indicates safety information. Optical system:2/3” Prism optical system, F1.4 Pickup device:2/3” interline wide CCD Number of valid pixels:948 (H)!485 (V) (About 460000 pixels) Total number of pixels:1020 (H)!505 (V) (About 510000 pixels) Scanning system:525 lines, 60 fields, 30 flames Synchronization system:Internal synchronization: EIA standard External synchronization: BBS or VBS (BNC!1, Dsub 50 P!1) Video output:Composite: 1.0...
Page 59
-59- Chroma amount variability :7 levels variability Encoding system:Y, R-Y, B-Y Gain selection:0 to 30 dB in step, AGC, Night Eye L/H Electronic shutter speed:1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, ELC, Synchro scan (60.34 Hz to 15.75 kHz) CCD readout selection:Field, Flame 1, Flame 2 Color bars:SMPTE Lens mount:2/3” bayonet mount Lens diaphragm:Auto, Manual (only with remote control), Adjust ON, OFF Selectors:MENU (A) ITEM/AWC (S) (AWC: when menu screen is not displayed) YES/ABC (+)...
Page 60
-60- Standard accessoriesRubber sheet ...................................................................... 1 Mounting adapter ................................................................ 1Screw .................................................................................. 2 Mounting spacer .................................................................. 1